Electrical Interface Specifications; Cabling; Interface Connector - IBM DYLA-28100 - Travelstar 8.1 GB Hard Drive Specifications
(8190/7920/6440 mb) 2.5-inch hard disk drive with ata interface
Hide thumbs
Also See for DYLA-28100 - Travelstar 8.1 GB Hard Drive:
- Quick installation manual (2 pages)
Table of Contents
Advertisement
6.0 Electrical Interface Specifications
6.1 Cabling
The maximum cable length from the host system to the drive plus circuit pattern length in the host system
shall not exceed 18 inches.
6.2 Interface Connector
The signal connector for AT Attachment is designed to mate with Dupont part number 69764-044 or equiv-
alent.
Figure 20 and Figure 18 show the connector location and physical pin location.
Figure 20. AT Attachment connector of DYLA-28100/27900/26480
Note 1 :
Pin position 20 is left blank for correct connector insertion.
Note 2 :
Pin position 47 through 50 are used for drive address setting. (Refer to Figure 35 on page 53
for address setting.)
Copyright IBM Corp. 1997
35
- Quick Links:
- Drive Characteristics
Hide quick links:
Advertisement
Table of Contents
