hit counter script
Pioneer DEH-5200SD Operating Instructions Manual

Pioneer DEH-5200SD Operating Instructions Manual

Cd rds receiver

Advertisement

CD RDS RECEIVER
DEH-5200SD
Operation Manual
English

Advertisement

Table of Contents
loading

Summary of Contents for Pioneer DEH-5200SD

  • Page 1 CD RDS RECEIVER DEH-5200SD Operation Manual English...
  • Page 2: Table Of Contents

    Contents Thank you for purchasing this PIONEER product. To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future refer- ence.
  • Page 3: Before You Start

    Refer all ser- vicing to qualified personnel. ! The Pioneer CarStereo-Pass is for use only in Germany. ! Always keep the volume low enough to hear If you want to dispose this product, do not mix outside sounds.
  • Page 4: Reverse Mode

    ! A call is made or received using a cell phone connected to this unit. ! Voice guidance is output from a connected Pioneer navigation unit. The sound is turned off, MUTE is displayed and no audio adjustments, except volume con- trol, are possible.
  • Page 5: Operating This Unit

    CAUTION LIST/ pending on the source. ENTER Use an optional Pioneer USB cable (CD-U50E) to While in the operating menu, connect the USB audio player/USB memory to press to control functions. the USB port. Since the USB audio player/USB memory is projected forward from the unit, it is dangerous to connect directly.
  • Page 6: Basic Operations

    Section Operating this unit Basic Operations Notes Important ! When this unit’s blue/white lead is connected ! Handle gently when removing or attaching to the vehicle’s auto-antenna relay control the front panel. terminal, the vehicle’s antenna extends when ! Avoid subjecting the front panel to excessive this unit’s source is turned on.
  • Page 7: Using Pi Seek

    Section Operating this unit Using Auto PI Seek for preset stations When preset stations cannot be recalled, the unit can be set to perform PI Seek during pre- set recall. ! The default setting for Auto PI Seek is off. Refer to Auto PI (auto PI seek) on page 16.
  • Page 8: Using Radio Text

    Section Operating this unit Using radio text Advanced operations using special buttons Displaying radio text You can display the currently received radio text and the Receiving traffic announcements three most recent radio texts. TA (traffic announcement standby) lets you receive traf- 1 Press DISP/SCRL and hold to display radio text.
  • Page 9: Pty List

    Section Operating this unit PTY list Local seek tuning lets you tune in only those radio sta- tions with sufficiently strong signals for good recep- News&Inf tion. 1 Press M.C. to turn local on. News (News), Affairs (Current affairs), Info (Informa- ! To cancel, press M.C.
  • Page 10: Displaying Text Information

    Section Operating this unit ! When playing back VBR (variable bit Returning to root folder rate)-recorded AAC files, the average bit 1 Press and hold BAND/ESC. rate value is displayed. However, de- Switching between compressed audio and CD-DA pending on the software used to decode 1 Press BAND/ESC.
  • Page 11: Selecting And Playing Files/Tracks From The Name List

    Section Operating this unit ! When Windows Media Player 11 is used to en- Function settings code the WAV files, text information can be Press M.C. to display the main menu. displayed. Turn M.C. to change the menu option and press to select FUNCTION. Selecting and playing files/ Turn M.C.
  • Page 12: Displaying Text Information

    Section Operating this unit 6 Song time (progress bar) Use M.C. to select a category/song. 7 Play time indicator Changing the name of song or category 1 Turn M.C. Playing songs on iPod 1 Open the USB connector cover and plug in an Playlists (playlists)—Artists (artists)—Albums (albums)—Songs (songs)—Podcasts (podcasts) iPod using the iPod Dock Connector to USB...
  • Page 13: Advanced Operations Using Special Buttons

    Section Operating this unit Advanced operations using Function settings special buttons Press M.C. to display the main menu. Turn M.C. to change the menu option Selecting a repeat play range 1 Press /LOC to cycle between the following: and press to select FUNCTION. ! ONE –...
  • Page 14: Audio Adjustments

    Section Operating this unit Sound Retriever (sound retriever) Fader/Balance (fader/balance adjustment) ! Refer to Sound Retriever (sound retriever) on 1 Push M.C. up or down to adjust front/rear speaker page 11. balance. F15 to R15 is displayed as the front/rear speaker balance moves from front to rear.
  • Page 15: Initial Settings

    Section Operating this unit Note This unit is equipped with a subwoofer output which can be turned on or off. When selecting FM as the source, you cannot 1 Press M.C. to turn subwoofer output on or off. switch to SLA. 2 Push M.C.
  • Page 16 Section Operating this unit AUX (auxiliary input) 1 Push M.C. left or right to select the segment of the clock display you wish to set. Activate this setting when using auxiliary device con- Hour—Minute nected to this unit. 2 Push M.C. up or down to put a clock right. 1 Press M.C.
  • Page 17: Other Functions

    Section Operating this unit Using different entertainment 1 Press M.C. tp turn the demo display on or off. displays ! You can also turn on or off feature demo by pressing DISP while this unit is turned off. For You can enjoy entertainment displays while lis- more details, refer to Demo mode on page 3.
  • Page 18: Additional Information

    When you contact your dealer or your nearest playback and sound. Pioneer Service Center, be sure to note the when you start to error message. hear any sound...
  • Page 19: Ipod

    Appendix Additional Information No songs Transfer the audio USB storage de- USB storage de- files to the USB vice is not for- vice should be for- NO AUDIO ERROR-23 storage device and matted with matted with FAT12, FAT12, FAT16 or FAT16 or FAT32.
  • Page 20: Handling Guideline

    Appendix Additional Information iPod operates Check if the con- Avoid leaving discs in excessively hot environments correctly but nection cable for CHECK USB including under direct sunlight. does not charge iPod shorted out Do not attach labels, write on or apply chemicals to (e.g., not caught in the surface of the discs.
  • Page 21: Compressed Audio Compatibility (Disc, Usb, Sd)

    Appendix Additional Information SD memory card For details, refer to the iPod’s manuals. About iPod settings This unit supports only the following SD memory ! When an iPod is connected, this unit changes the cards. ! SD EQ (equalizer) setting of the iPod to off in order to ! miniSD optimize the acoustics.
  • Page 22: Sd Memory Card

    This unit may not operate correctly depending on the application used to encode WMA files. CAUTION Pioneer accepts no responsibility for data lost on There may be a slight delay when starting playback of the USB memory/USB portable audio player/SD audio files embedded with image data.
  • Page 23: Ipod Compatibility

    When using an iPod, iPod Dock Connector to USB SD). Cable is required. To specify the playback sequence, the follow- Pioneer CD-IU50 interface cable is also available. For ing method is recommended. details, consult your dealer. 1 Create the file name including numbers that About the file/format compatibility, refer to iPod man- specify the playback sequence (e.g.,...
  • Page 24 Appendix Additional Information miniSD Logo is a trademark. Supply of this product only conveys a license for private, non-commercial use and does not convey a license nor imply any right to use this product in any commercial (i.e. revenue- generating) real time broadcasting (terrestrial, microSD Logo is a trademark.
  • Page 25 Appendix Additional Information “Works with iPhone” means that an electronic accessory has been designed to connect spe- cifically to iPhone and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
  • Page 26: Specifications

    Appendix Additional Information Specifications WAV signal format ....Linear PCM & MS ADPCM (Non-compressed) General Power source ......14.4 V DC (10.8 V to 15.1 V USB standard specification allowable) ............. USB 2.0 full speed Grounding system ....Negative type Maximum current supply ..
  • Page 27 TEL: (03) 9586-6300 PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: 1-877-283-5901 TEL: 905-479-4411 PIONEER ELECTRONICS DE MEXICO, S.A. de C.V. Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico, D.F. 11000 TEL: 55-9178-4270 先鋒股份有限公司...

Table of Contents