Safety instructions Your new fridge may have other functions compared to your previous one. Carefully read these instructions to learn how the appliance works and how to care for it. Keep the instruction booklet. It will come in handy if you later sell the cabinet or give it to somebody else. These warnings are provided in the interests of your safety.
Control Panel A. Thermostat control Use to switch on and set the desired temperature. Before use Position and clean the cabinet as explained in the section "Installation". Check that the drain hose at the rear of the cabinet discharges into the drip tray. Before inserting the power plug into the outlet and switching on the cabinet for the first time, leave it standing upright...
Cabinet interior Dividing plate The dividing plate separates the chiller compartment from the fridge. The dividing plate features a grille that can be opened and closed to control the amount of cold air entering the chiller compartment. When the grille is opened, the chiller compartment will become colder.
Internal Cleaning Clean the inside and accossories with warm wather and bicarbonate of soda (5ml to 0,5 liter water) Rinse and dry thoroughly. Regularly check the door seals and wipe clean to ensure they are clean and free from debris. Disconnect the appliance from electricity supply.
Something Not Working Before contacting your local Service Force Centre check the following point: Problem Possible cause / Remedy It is too warm inside the refrigerator. Set a lower temperature. Put food products in the right place inside the refrigerator. See the chapter "Temperature inside the refrigerator".
have read the details under the heading "Something Not Working" Service and Spare Parts When you contact the Service Center you will need In the event of your appliance requiring service, or to give the following details.They will be found if oyu wish to purchase spare parts please contact inside your appliance.
Cleaning Wash the inside of the cabinet using lukewarm water, a mild washing-up detergent and a soft cloth. Installing the cabinet To obtain the best performance from the cabinet, ensure : · the cabinet is placed in a dry, cool place and is not exposed to direct sunlight.
Door Reversal 1. Close the cabinet and disconnect the appliance from the electricity supply. 2. Remove the ventilation grille. There is a part on the grille that can be removed. Remove it and put it on the other side. 3. Put the cabinet on a wooden block when it is laid down.