Operating Instructions LCD Television TX-32LED7FM Model No. INPUT GUIDE EXIT MENU RETURN ASPECT OPTION DIRECT TV REC TEXT STTL INDEX HOLD PROGRAMME English Please read these instructions before operating your set and retain them for future reference. The images shown in this manual are for illustrative purposes only.
Page 2
• Any functions related to DVB (Digital Video Broadcasting) will work in areas where DVB-T (MPEG2) digital terrestrial broadcasting are received. Consult your local Panasonic dealer with coverage areas. • DVB functions may not be available in some countries. •...
TV unstable, risking injury. Be sure to Avoid exposing the TV to direct sunlight and other ask your local Panasonic dealer to perform setup. sources of heat. To prevent ¿ re never place any Use optional stands / mounts (p. 6).
Notes Auto power standby function Caution If no signal is received and no operation is When cleaning the TV, remove the mains plug performed in TV mode for 30 minutes, the TV will (Cleaning an energized TV may cause electrical shock.) automatically go to standby mode.
How to remove the TV Stand WARNING! • Failure to use a Panasonic bracket or choosing to mount the Remove four screws. unit yourself will be done at the risk of the consumer. Any damage resulting from not having a professional installer mount your unit will void your warranty.
Identifying Controls Mains power On / Off switch Changes the input mode Function select • Increases or decreases the programme Volume / Contrast / Brightness / position by one. When a function is Colour / Sharpness / Tint (NTSC mode) / Bass / Treble / already displayed, press to increase or Balance / Auto Setup (p.
Basic Connection External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. Example 1 Example 2 Connecting aerial Connecting DVD Recorder / VCR TV only TV, DVD Recorder or VCR Rear of the TV...
Page 9
Example 3 Connecting DVD Recorder / VCR and Set top box TV, DVD Recorder / VCR and Set top box Rear of the TV AC 220-240 V Aerial 50 Hz Mains lead RF cable HDMI RF cable COMPONENT AUDIO OUT SCART cable SCART cable (fully wired)
Auto Setup Search and store TV channels automatically. These steps are not necessary if the setup has been completed by your local dealer. Plug the TV into mains socket and switch On (Takes a few seconds to be displayed) • You can now use the remote control to turn On the TV or turn the TV to standby mode.
Page 11
Many features available on this TV can be accessed via the On Screen Display menu. How to use remote control MENU Open the main menu Move the cursor / select the menu Move the cursor / adjust levels / select from a range of options Access the menu / store settings after adjustments have been made or options have been set RETURN...
Watching TV Turn power on (Press for about 1 second) Mains power On / Off switch should be On. INPUT GUIDE EXIT Select DVB (Digital Video Broadcasting) or Analogue MENU RETURN ASPECT OPTION DIRECT TV REC 1 BBS 23:35 Profile 1 Change category Corontation Street 20 : 00 ~ 20 : 55...
Page 13
Other useful functions (Operate after HOLD Hold Freeze / unfreeze picture Display / hide subtitles (if available) Display STTL • To change the language for DVB subtitles “Preferred Subtitles” (p. 21) (If available) OPTION Check or change the current programme status instantly •...
Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch the input. To connect the equipment (p. 8 and p. 9) The Remote Control is capable of operating some functions of selected Panasonic external equipment. Turn the TV on When connecting with SCART as example 2 or 3 (p.
Page 15
Panasonic equipment connected to the TV can be directly operated with the remote control. VCR / DVD switch Select VCR to operate Panasonic VCR or DVD equipment Select DVD to operate Panasonic DVD equipment or Player home theatre Standby Set to Standby mode / Turn on...
Viewing Teletext You can enjoy teletext broadcasting, including news, weather forecasts and subtitles, if this service is provided by the broadcasters. What is FLOF (FASTEXT) mode? In FLOF mode, four differently coloured subjects are situated at the bottom of the screen. To access more information about one of these subjects, press the appropriately coloured button.
Page 17
If you wish to hold the current page without updating Stop or resume automatic updating HOLD HOLD HOLD To resume Return to the main index page • INDEX INDEX TOP (FLOF) / List mode Call up a (Analogue mode only) •...
How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions. Display the menu • MENU Displays the functions that can be set (varies according to the input signal) INPUT GUIDE EXIT Select the menu access Main Menu...
Overview Main Menu VIERA Link VIERA Link Menu The menu of the accessed VIERA Link Control Recorder equipment Speaker Selection Home Cinema Picture (p. 35) Sound Setup Picture Menu Viewing Mode Dynamic Contrast Brightness Colour Sharpness Tint Colour Balance Normal Colour Management P-NR Picture Menu...
How to Use Menu Functions Menu list Item Adjustments / Con¿ gurations (alternatives) Menu Controls the connected Panasonic equipment VIERA Link Control “Easy control only with VIERA remote control” (p. 35) “Speaker control” (p. 35) • You can also access VIERA Link Menu directly using the VIERA Link button on the Speaker Selection remote control.
Page 21
Menu list Menu Item Adjustments / Con¿ gurations (alternatives) Selects optional colour system based on video signals in AV mode AV Colour System (Auto / PAL / SECAM / M.NTSC / NTSC) DVB Pro¿ le Edit Creates list of favourite programmes (p. 25) DVB Service List Skips the unwanted DVB channels (p.
DVB Settings (DVB mode) DVB Settings provide access to various advanced features. If in Analogue mode Select DVB INPUT Display the menu GUIDE EXIT MENU MENU RETURN ASPECT OPTION DIRECT TV REC Select “Setup” access Main Menu VIERA Link Picture select Sound Setup...
Page 23
The Common Interface Module menu provides access to software contained on Common Interface (CI) Modules. This TV receiver works only Pay TV modules complying with CI standard. Caution • Turn Off Mains power On / Off switch CI slot whenever inserting or removing the CI module.
Editing Channels You can make your favourite channel lists, skip unwanted channels and control channel audience. Select DVB or Analogue • “DVB Pro¿ le Edit” and “DVB Service List” are available in DVB mode only. Display the menu INPUT MENU GUIDE EXIT MENU...
Page 25
Create your favourite channel list (Pro¿ le) from various broadcasters (up to 4: Pro¿ le 1 to 4). The list is displayed in information banner (p. 13) and then easily accessed. A channel is added Select a channel and add it to the list Profile Editor Wed 12/05/04 10:46 Profile Editor...
Tuning Channels You can re-tune all TV channels when moving house or search for new services which may have recently started broadcasting. Select DVB or Analogue • “DVB Manual Tuning”, “Add New DVB Services”, “New Service Message” and “DVB Signal Condition” are available in DVB mode only. •...
Page 27
• Edit the analogue programme position settings To change channel number “Analogue Manual Tuning” (p. 29) Select the channel to edit Analogue Programme Edit Prog. Chan. Name Sound Sys. Colour Sys. CH33 1 2 3 Auto CH21 X Y Z Auto select CH21...
Page 28
Tuning Channels Automatically set the DVB and Analogue channels received in the area. If a Child Lock PIN number (p. 25) has been set, it must be entered. Start Auto Setup Settings are made automatically Auto Setup - Digital and Analogue Auto Setup Digital Scan Analogue Scan...
Page 29
Fine Tuning Use to make small adjustments to the tuning of an individual channel (affected by weather conditions, etc.) Manual Tuning Set Analogue channel manually after Auto Setup. If a VCR is connected with only the RF cable, select programme position “0”. Set Analogue channel Analogue Manual Tuning...
Restore Settings Resets the TV to its original condition, i.e. no channels tuned in. All settings (channels, picture, sound quality, etc.) are reset. Display the menu MENU INPUT GUIDE EXIT MENU RETURN Select “Setup” access Main Menu ASPECT OPTION DIRECT TV REC VIERA Link Picture select...
Input Labels For easier identi¿ cation and selection of the input mode, you can label each input terminals or skip terminal that is not connected to any equipment. (To select the input mode p. 14) Display the menu MENU INPUT GUIDE EXIT Select “Setup”...
Q-Link Functions Q-Link connects the TV and VCR / DVD recorder, enables easy recording and playback. Condition • Use the VCR / DVD recorder with the following logos: “Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC”, “Easy Link”, “Megalogic”, or “SMARTLINK” • Connect the equipment to this TV’s AV1 or AV2 terminal via a “fully-wired” SCART cable. (p. 36) •...
(
2): Enquire at your local digital equipment retailer shop. Summary of Control functions Connecting with an HDMI cable to Panasonic equipment with VIERA Link function, you can control the equipment (p. 34). You can use VIERA Link and Q-Link functions together.
Page 34
” VIERA Link “ Control Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function. This TV supports “HDAVI Control 2” function. Connections to some Panasonic equipment (DVD Recorder DIGA, HD Video Camera, Player theatre, Ampli¿ er, etc.) with HDMI cables allow you to interface them automatically.
Page 35
TV is automatically turned on. link (Only when TV is in Standby mode.) When TV is set to Standby mode, the connected Panasonic equipment is also Power off automatically set to Standby.
These diagrams show our recommendations for how to connect the TV to your various equipment. For other connections, consult the instructions for each piece of equipment, the table below, and the speci¿ cations (p. 43). This slot is for services by the Panasonic dealer. SCART cable Fully wired HDMI compliant cable...
Page 37
Use fully wired HDMI compliant cable. Ampli¿ er • Read the manuals of the equipment too. Easy playback, Easy control only with VIERA remote control HD Video Camera Panasonic DVD Recorder Speaker system Panasonic Player theatre Panasonic DVD Recorder, HD Video Camera, etc.
Technical Information Aspect Ratio The optimum size and aspect can be chosen, and you can enjoy ¿ ner images. (p. 13) Auto aspect: Auto aspect determines the best aspect ratio to use to ¿ ll your screen. It does this using a four step process to determine if the picture being viewed is a widescreen picture.
Page 39
You can set the reservation for update. The update will not start when the TV is set to Off. VIERA Link “ Control ” HDMI connections to some Panasonic equipment allow you to interface them automatically. (p. 34) • This function may not work normally depending on the equipment condition. •...
Page 40
Technical Information SCART, S-VIDEO and HDMI terminal information AV1 SCART terminal AV2 SCART terminal (RGB, VIDEO, S-VIDEO, Q-Link) (RGB, VIDEO, Q-Link) AV2 - Pins 15 and 20 are dependent on AV2 S-VHS / VIDEO switching. Suitable inputs for AV1 include RGB (Red / Green / Blue). Suitable inputs for AV2 include RGB (Red / Green / Blue).
FAQs Before requesting service or assistance, please follow these simple guides to resolve the problem. If problem still persists, please contact your local Panasonic dealer for assistance. To customer using White spots or shadow indoor aerial images (noise) In order to enjoy a good quality DVB image, it is important to receive a good quality DVB signal.
Page 42
If “Signal Quality” or “Signal Strength” are displayed in red, Interference or check aerial. frozen / disappearing If problem persists, consult your local Panasonic dealer. • image in DVB Turn the TV off with the Mains power On / Off switch, then turn it On again.
Speci¿ cations TX-32LED7FM Power Source AC 220-240 V, 50 Hz Average use 135 W Standby condition 1 W (Without DVB recording) / 13 W (With DVB recording) Aspect Ratio 16:9 80 cm (diagonal) Visible screen size 699 mm (W) × 394 mm (H) Number of pixels 1,049,088 (1,366 (W) ×...
Matsushita Electric Industrial Co., Ltd. Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996) TX-32LED7FM Declaration of Conformity No 5183, 23 November 2007 Customer’s Record The model number and serial number of this product may be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identi¿...