Table of Contents
Advertisement
Recording
Recording functions
REC
Direct recording of the
VCR - TV picture.
Timer recording
Recording controlled by timer.
Recording with INTELLIGENT TIMER
Repeating programmed
recordings.
Recording with ShowView
Programming recordings using
the ShowView function.
Recording with external recording controls
Recording is controlled
by an external device.
20
SV121 HV61 HV51 MV21 MV16
REC
Set the TV set to the video channel and insert a cassette into the VCR;
make sure that the cassette's protection tab is intact.
Select channel to record from.
When recording from an external device, select from
Scart inputs AV1, AV2, or the front panel input AV3.
Press REC to start recording.
20
Press STOP
Press PAUSE/SLOW to pause recording.
To protect the video heads this function will be terminated after
approx. 5 minutes.
Press PAUSE/SLOW again to resume recording.
21
Recordings in the S-VHS or S-VHS ET REC mode are supported
by the PAL TV system only (SV121 only, page 19).
Tape speed
REC MODE
Prior to starting the recording session, press REC MODE to set
23
the tape speed.
SP :
LP :
EP :
When playing back LP or EP recordings, interferences may occur when
using certain types of cassettes (e.g. Type E-300). These are not
24
indicative of a VCR malfuncion.
Tape Remain counter
STATUS
The display of the VCR shows:
Time - Counter - Tape Remain.
25
Press STATUS until [RE] is displayed.
to stop recording.
normal recording time
-
double recording time
-
triple recording time
-
optimal picture quality
simple picture quality
reduced picture quality
Hide quick links:
Advertisement
Table of Contents
