Page 9
6. Place chrome trim rings so that none of the three clips on the ring is directly above the ends of the element. Snap ring into place. 7. Lift element up through trim ring and slip drip pan under it. 8.
Page 17
TO REMOVE THE TOP Reflector Bowl WARNING Disconnect Power before removing the top or cleaning in the rough-in box. Trim Ring 1. Remove the reflector bowls and trim rings as described on Pages 6 and 7. Pull off control knobs and remove pal nuts. Place thumb on top of clip and with forefinger pull bottom of clip out.
Page 24
Thermador reserves the right to change specifications or design without notice. Some models are certified for use in Canada. Thermador is not responsible for products which are transported from the United States for use in Canada. Check with your local Canadian distributor or dealer. Thermador, 5551 McFadden Avenue, Huntington Beach, CA 92649.