Multi Channel Surround Setup - Sony ST-RV444ES Operating Instructions Manual
Fm stereo fm-am receiver
Hide thumbs
Also See for ST-RV444ES:
- Service manual (104 pages) ,
- Operating instructions manual (66 pages) ,
- Technical background (38 pages)
Table of Contents
Advertisement
Multi Channel Surround Setup
For the best possible surround sound all speakers should
be the same distance from the listening position (A).
However, this unit lets you to place the center speaker up
to 5 feet (1.5 meters) closer (B) and the rear L/R speakers
up to 15 feet (4.5 meters) closer (C) to the listening
position.
The front speakers can be placed from 3 to 40 feet (1.0 to
12.0 meters) from the listening position (A).
You can place the rear L/R speakers either behind you or
to the side, depending on the shape of your room (etc.).
When placing rear speakers to your side
B
A
45
C
When placing rear speakers behind you
B
A
45
C
18
A
C
90
20
A
C
90
20
z
When setting up the rear center speaker
Set the speaker at least one meter behind the listening position. It
is recommended to place the speaker at an equal distance from
the rear L/R speakers. If there is no space behind the listening
position, set the speaker above the listening position by placing it
on a stand or hanging it from the ceiling. To prevent speaker
damage or injury in case the speaker falls, make sure that it is
properly fixed in place.
Note
Do not place the center speaker farther away from the listening
position than the front speakers.
Specifying the speaker parameters
1
Press ?/1 to turn on the receiver.
2
Press SET UP.
3
Press the cursor buttons (
parameter you want to adjust.
4
Turn the jog dial to select the setting you desire.
The setting is entered automatically.
5
Repeat steps 3 and 4 until you have set all of the
parameters that follow.
x Front speaker size (FRONT)
Initial setting : LARGE
• If you connect large speakers that will effectively
reproduce bass frequencies, select "LARGE". Normally,
select "LARGE".
• If the sound is distorted, or you feel a lack of surround
effects when using multi channel surround sound,
select "SMALL" to activate the bass redirection circuitry
and output the front channel bass frequencies from the
sub woofer.
• When the front speaker is set to "SMALL", the center,
rear L/R and rear center speakers are also automatically
set to "SMALL" (unless previously set to "NO").
or
) to select the
Hide quick links:
Advertisement
Table of Contents
