Ms Lid Assembly Replacement - Sony HDCAM HDW-F900R Maintenance Manual

Down converter board

Hide thumbs Also See for HDCAM HDW-F900R:

Table of Contents

6-12. MS Lid Assembly Replacement

1. Open the SW door of the inside panel assembly in the

direction of the arrow and remove the two VR knobs

2. Open the inside panel assembly.

(Refer to Section 1-5.)

3. Remove the screw and the FR flexible cable retainer.

4. Remove the three precision screws and remove the

shield plate.

5. Disconnect the flexible card wires from the connectors

(CN105 to CN107) on the MB-1096 board.

Life of flexible card wire will be significantly short-

ened if it is folded. Be very careful not to fold the

flexible card wire.

6. Disengage the hinge from the two hooks and remove

the inside panel assembly from the unit.

MB-1096 board

Flexible card wires

VR knobs (2)

FR flexible cable retainer

Shield plate

Inside panel

HDW-F900R/V1 (E)

Show Quick Links

Table of Contents