Beko DC 7110 Installation And Operating Instructions Manual
Condenser time dryer
Hide thumbs
Also See for DC 7110:
- User manual (21 pages) ,
- User manual (73 pages) ,
- User manual (81 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Beko DC 7110
Summary of Contents for Beko DC 7110
- Page 1 Condenser Time Dryer DC 7110...
- Page 2 Read this manual prior to initial operation of the product! Dear Customer, We hope that your product, which has been manufactured in modern facilities and passed through a strict quality control procedure, will give you very good results. We advise you to read through this manual carefully before using your product and keep it for future reference.
-
Page 3: Table Of Contents
TABLE OF CONTENTS 1 Your Dryer Programme selection and consumption table ..........15 Overview ..........4 Auxiliary function ........16 Technical Specifications .......5 Warning indicators ......16 Time delay .........16 2 Important safety information 6 Starting the programme .....16 General safety ........6 Progress of programme .....16 Intended use ........7 Changing the programme after it has Children’s safety ........7... -
Page 4: Your Dryer
Overview 1- Control panel 5- Rating plate 2- Kick plate opening tab 6- Fluff filter 7- Power cord 3-Adjustable feet 4-Kick plate 4 EN... -
Page 5: Technical Specifications
Technical Specification Height (adjustable) 84.6 cm Width 59.5 cm Depth 53 cm Capacity (max.) 7 kg Weight (net) 35 kg Voltage Check the rating label Rated power input Model code Rating label is located behind the loading door. Specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly. -
Page 6: Important Safety Information
Important safety information This section includes safety information that will or explosive materials as well as the items help protection from risks of personal injuries that are contaminated or spotted with such or materialistic damages. Failure to follow materials should not be dried in the product these instructions shall cause any warranty and since they emit flammable or explosive vapor. -
Page 7: Intended Use
There is the risk of electric shock! Always product. disconnect by unplugging from the mains Children’s safety before cleaning. • Electrical appliances are dangerous for • Never touch the plug with wet hands. Never the children. Keep children away from the unplug by pulling on the cable, always machine when it is operating. -
Page 8: Installation
Installation Prior to installation, visually check if the product for the first time. Do not leave any product has any defects on it. If so, do not have items inside the drum. it installed. Damaged products will cause risks Under counter installation for your safety. -
Page 9: Disposing Of Packaging Material
Disposing of packaging material Packaging materials are dangerous to children. Keep packaging materials in a safe place out of reach of children. Packaging materials of your product are manufactured from recyclable materials. Sort and dispose of them in accordance with recycled waste instructions. Do not dispose of them with normal domestic waste. -
Page 10: Electrical Connection
Electrical Connection Make sure that you have an earthed power with the symbol or coloured green and yellow outlet socket rated at 13 amps (minimum). or green. Attention! 2 Connect the blue (neutral) wire to the terminal in the plug marked ‘N’ or coloured When installed, the socket must be reachable black. -
Page 11: Initial Preparations For Drying
Initial preparations for drying Things to be done for energy saving: A B C • Make sure that you operate the product at its full capacity but pay attention to not exceeding it. • Spin your laundry at the highest speed possible when washing them. -
Page 12: Preparing Laundry For Drying
• Garments or pillows bolstered with rubber Following weights are given as examples. foam (latex foam), shower bonnets, water Approximate resistant textiles, materials with rubber Home articles weights (g) reinforcement and rubber foam pads should not be dried in the dryer. Cotton quit covers (double) 1500 •... -
Page 13: Selecting A Programme And Operating Your Machine
Selecting a Programme and Operating Your Machine Control panel 1. Filter cleaning warning light 4. On/Off button Warning light turns on when the filter is full. Used to turn on and off the machine. 2. Programme follow-up indicator 5. Programme selection knob Used to follow-up the progress of the current Used to select a programme. -
Page 14: Preparing The Machine
Preparing the machine 1. Plug in your machine. 2. Place the laundry in the machine. 3. Press the “On/Off” button. Pressing the “On/Off” button does not necessarily mean that the programme has started. Press “Start/Pause/Cancel” button of the machine to start the programme. Timer programme selection Decide the appropriate time from the table below which includes drying temperature in... -
Page 15: Programme Selection And Consumption Table
Programme selection and consumption table Programme table Approximate Spin speed in washing amount of Drying time Programmes Capacity (kg) machine (rpm) remaining (minutes) humidity Cottons / Coloreds 1000 60 % 70 % Cupboard dry 1000 60 % 70 % 1000 60 % 70 % Iron dry... -
Page 16: Auxiliary Function
Auxiliary function Adding/removing laundry in standby Low temperature mode This function allows for drying at lower In order to add or take out laundry after the temperatures and therefore saves energy. start-up of the programme; Warning LED will light up when you select the function. -
Page 17: End Of Programme
and “Water tank” warning LEDs as well as the “0” warning LED on the programme follow-up indicator will light up at the end of this period for reminding purposes. As the inside of the machine will be excessively hot when you cancel the programme while the machine is running, activate the ventilation programme to cool it down. -
Page 18: Maintenance And Cleaning
Maintenance and cleaning *To drain the water tank: Filter Cartridge / Door Inner Surface 1-Carefully remove the water tank by opening Lint and fibres released from the laundry to the the kick plate cover/pulling the drawer. air during the drying cycle are collected in the “Filter Cartridge”. -
Page 19: For The Condenser
For the condenser; 4. Clean the condenser by applying pressurized water with a shower armature Hot and humid air in the condenser is cooled and wait until the water drains. with the cold air from the room. Thus, the humid air circulating in your dryer is condensed and then pumped into the tank. -
Page 20: Suggested Solutions For Problems
Suggested solutions for problems Drying process takes too much time • Meshes of the filter may be clogged. Wash with water Laundry comes out wet at the end of drying. • Meshes of the filter may be clogged. Wash with water. •... -
Page 21: Guarantee
Guarantee Your new product is guaranteed against the Important notes cost of breakdown repairs for twelve months • Your product is designed and built for from the date of the original purchase. domestic household use only. What is covered? • The guarantee will be void if the product •... -
Page 22: Service
Service Please keep your purchase receipt or other Service once the manufacturers proof of purchase in a safe place; you will guarantee has expired. need to have it should the product require If you have purchased an extended guarantee attention under guarantee. please refer to the instructions contained You should also complete the details below;...