Table of Contents
Advertisement
The audio function does not work.
Picture OK
&
No sound
No output from one
of the speakers
Unusual sound from
inside
the product
• Press the VOL or VOLUME button.
l!I
Sound muted? Press MUTE button.
III
Try another channel. The problem may be with the broadcast.
• Are the audio cables installed properly?
• Adjust Balance in menu option.
~
A change in ambient humidity or temperature may result in an unusual noise
when the product is turned on or off and does not indicate a fault with the
product.
There is a problem in PC mode. (Only PC mode applied)
The signal is out of range
Vertical bar or stripe on
background &
Horizontal Noise &
Incorrect position
Screen color is unstable
or single color
MAINTENANCE
II
Adjust resolution, horizontal frequency, or vertical frequency.
• Check the input source.
II
Work the Auto configure or adjust clock, phase, or H/V position. (Option)
• Check the signal cable.
II
Reinstall the PC video card.
o
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can
enjoy your new TV.
Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
Here's a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing detergent. Wring the cloth until it's almost dry, and then
use it to wipe the screen.
f)
Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
Cleaning the Cabinet
• To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
• Please be sure not to use a wet cloth.
Extended Absence
A
CAUTION
It-
If you expect to leave your TV dormant for a long time (such as a vacation), it's a good idea to unplug
the power cord to protect against possible damage from lightning or power surges.
35
Advertisement
Chapters
Table of Contents
Troubleshooting
