Video Input Source Selection - Sanyo PLC-XM100 Owner's Manual
Multimedia projector
Hide thumbs
Also See for PLC-XM100:
- Owner's manual (149 pages) ,
- Network manual (60 pages) ,
- Specifications (1 page)
Table of Contents
Advertisement
Menu Operation
1
Press the MENU button to display the On-Screen Menu. Use
2
3
then press the SELECT button.
WHEN SELECTING INPUT 1 (COMPUTER INPUT
TERMINALS )
When connecting to video equipment, select the type of Video
source in the Source Select Menu.
RGB(Scart)
When scart video equipment is connected to the INPUT 1
(ANALOG) terminal, select RGB (Scart).
RGB(AV HDCP)
If the HDCP-compatible signal source is connected to the
INPUT 1 (DIGITAL) terminal, select RGB (AV HDCP).
WHEN SELECTING INPUT 2 (5 BNC INPUT JACKS )
When connecting to video equipment, select the type of Video
source in the Source Select Menu.
When the video input signal is connected to the
Video
VIDEO jack, select Video.
When the video input signal is connected to the
Y,Pb/Cb,Pr/Cr
Y-Pb/Cb-Pr/Cr jacks, select Y,Pb/Cb,Pr/Cr .
Note:
• When the video input signal is connected to the Y-Pb/Cb-Pr/Cr jacks,
Y,Pb/Cb,Pr/Cr takes precedence of RGB.
• Y,Pb/Cb,Pr/Cr input can accept the component signal and the analog
RGB signal. When analog RGB signal is not recognized in Y,Pb/Cb,Pr/
Cr input source, set to RGB input manually.
WHEN SELECTING INPUT 3 (AV TERMINALS )
When connecting to video equipment, select the type of Video
source in the Source Select Menu.
When the video input signal is connected to the
Video
VIDEO jack, select Video.
When the video input signal is connected to the
Y,Pb/Cb,Pr/Cr
Y-Pb/Cb-Pr/Cr jacks, select Y,Pb/Cb,Pr/Cr .
When the video input signal is connected to the
S-video
S-VIDEO jack, select S-video.
Video Input Source Selection
Input and then press the
and
INPUT 1 MENU
INPUT 2 MENU
Y,Pb/Cb,Pr/Cr
INPUT 3 MENU
Y,Pb/Cb,Pr/Cr
Input Selection
35
Hide quick links:
Advertisement
Table of Contents
