Computer Input Source Selection - Sanyo PLC-XM100 Owner's Manual

Multimedia projector

Hide thumbs Also See for PLC-XM100:

Owner's manual (149 pages)

Network manual (60 pages)

Specifications (1 page)

Table Of Contents

Table of Contents

Input Selection

Menu Operation

Press the MENU button to display the On-Screen Menu. Use

then press the SELECT button.

WHEN SELECTING INPUT 1 (COMPUTER INPUT

TERMINALS )

RGB(PC analog)

When your computer is connected to the INPUT 1 (ANALOG)

terminal, select RGB (PC analog).

RGB(PC digital)

When your computer is connected to INPUT 1 (DIGITAL)

terminal, select RGB(PC digital).

Note:

• Input source changes if the INPUT 1 button on the remote control is

pressed.

• HDCP (High-bandwidth Digital Content Protection) is a system for

protecting digital entertainment content which is delivered by DVI

(Digital Visual Interface) from being copied. The specification of HDCP

is decided and controlled by Digital Content Protection, LLC. Should

the specification be changed, this projector may not display the digital

content protected by HDCP.

WHEN SELECTING INPUT 2 (5 BNC INPUT JACKS )

When connecting the computer output [5 BNC Type (Green, Blue,

Red, Horiz. Sync, and Vert. Sync.)] from the computer to G, B, R,

H/HV, and V jacks:

RGB

When your computer is connected to the INPUT 2 (5 BNC

INPUT JACKS) terminal, select RGB.