Using The On-Screen Display Menu (Select Models) - HP ZR2040w User Manual
Hide thumbs
Also See for ZR2040w:
- Specifications (2 pages) ,
- User manual (64 pages) ,
- Product end-of-life disassembly instructions (8 pages)
Table of Contents
Advertisement
Pressing the Power button,
use the switch on the rear of the panel.) The monitor also enters low-power mode when there is no
video signal input.
When the monitor is first powered on, the LED turns blue and remains blue for about half a minute. It
then turns off. If the monitor receives a signal outside its range (e.g., too high a frequency), the LED
flashes blue continuously.
This model does not use an OSD or on-screen messages.
Using the On-Screen Display Menu (Select Models)
The On-Screen Display (OSD) menu gives you choices for operating your monitor. Not all menu
options below are available on all models. For example, monitors with no analog input do not show
menus specific to analog images. The ZR2740w does not use an OSD. Models that use an OSD
have a menu (
NOTE:
If there is a problem with the display settings, try resetting the settings to the factory defaults
by opening the OSD and selecting Factory Reset from the OSD menu.
NOTE:
To view an OSD menu simulator, visit the HP Customer Self Repair Services Media Library
at http://www.hp.com/go/sml.
, puts the monitor in low power mode. (To turn power off completely,
) button on the front.
Overview of Operation
27
Hide quick links:
Advertisement
Table of Contents
