E-Mail Setting - Sanyo PLV-80 Series Owner's Manual

Pj-net organizer plus c

Hide thumbs Also See for PLV-80 Series:

Table of Contents

Chapter 3 Basic Setting and Operation

E-mail setting

This product has an E-mail function which can send an alert message

to users or an administrator if it detects an abnormality on the projector

or run out of the life span of the lamp. Click E-mail setting on the main

menu and follow the below steps.

Setting SMTP server and administrator address

Set the server name or IP address of the SMTP server*

administrator address is set to "Reply-To" address of the message sent from the projec-

tor.

*1 The SMTP server is a server for sending E-Mail. Please contact your network administrator to

have this SMTP server address.

✐ If the network unit sends an alert message due to the abnormality on the projector but the SMTP

server is down in some other reason, the message will not be sent. In this case, the message

"Unable to connect to server." will be displayed on the setting page. To clear this message, set up

SMTP server address again.

✐ To use the E-Mail function, it must be set the DNS address on the Network setting page correctly.

✐ You cannot use this E-mail function if the DNS server and SMTP server cannot be used in your net-

work environment.

Item

Description

SMTP server*

..... Sets server name or IP address of the SMTP server

Administrator

address ...................Sets e-mail address of administrator

Add e-mail

address ................... Sets e-mail address of the user to send mail when

the projector has an abnormality.

and administrator address. The

Table of Contents

Plv-75 series Poa-pn02c