Using Gps (Select Models Only); Connecting To A Wired Network; Connecting To A Local Area Network (Lan) - HP Computer User Manual
Computer
Hide thumbs
Also See for Computer:
- User manual (60 pages) ,
- Troubleshooting and maintenance manual (22 pages) ,
- User manual (33 pages)
Table of Contents
Advertisement
8.
Insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated.
NOTE:
into your computer.
NOTE:
9.
Replace the service door. See
10.
Replace the battery. See
NOTE:
11.
Reconnect external power.
12.
Reconnect external devices.
13.
Turn on the computer.
Using GPS (select models only)
Your computer may be equipped with a Global Positioning System (GPS) device. GPS satellites
deliver location, speed, and direction information to GPS-equipped systems.
For more information, see the HP GPS and Location software Help.
Connecting to a wired network
Connecting to a local area network (LAN)
Use a LAN connection if you want to connect the computer directly to a router in your home (instead
of working wirelessly), or if you want to connect to an existing network at your office.
Connecting to a LAN requires an 8-pin, RJ-45 network cable.
To connect the network cable, follow these steps:
1.
Plug the network cable into the network jack (1) on the computer.
See the image on the battery bay to determine which way the SIM should be inserted
To remove a SIM, press in on the SIM, and then remove it from the slot.
Replacing the service door on page
Inserting a battery on page
HP Mobile Broadband will be disabled if the battery is not replaced.
45.
34.
Connecting to a wired network
19
Hide quick links:
Advertisement
Table of Contents
