Starting the Gateway Interface
Starting the Gateway Interface
The Gateway interface is a web-based user interface that you can use to view and configure the gateway
hardware and application parameters. You can use the Gateway interface to:
•
•
•
Before You Begin
The following requirements are necessary to launch the Gateway interface:
•
•
•
•
Procedure
Start the web browser.
Step 1
In the URL field, enter:
Step 2
IP address
Where IP address is the IP address assigned to the gateway for which you want to launch the Gateway
interface.
The Gateway interface login page appears.
Step 3
In the Name field, enter your user name.
Step 4
In the Password field, enter your password.
Click Login.
Step 5
The Gateway interface appears.
About Gateway Interface Users
Users must have the appropriate access level to log in to the Gateway interface. With Administrator-level
access, a user can configure the gateway and monitor gateway activity. You can view and manage the list
of gateway users in the Users tab of the Board section of the Gateway interface. The Users tab displays
all currently configured users and their access levels.
There are three types of Gateway interface users:
•
•
Administrator's Guide for Cisco IPVC 3521 BRI Gateway, Cisco IPVC 3526 PRI Gateway, and Cisco IPVC 3540 PRI Gateway
2-14
Set administrative parameters to define access to the gateway device
Set gateway application parameters that specify how the gateway processes incoming and outgoing
calls
Set chassis operating parameters for Cisco IPVC 3540 PRI Gateway modules installed in the top
slot of a Cisco IPVC 3544 chassis
A Java-enabled internet browser
The IP address assigned to the gateway you want to configure.
Administrator level-access
Only one user can access the Gateway interface at one time.
Administrator—Full access to the Gateway interface to configure gateway settings.
Operator—User can monitor or disconnect calls but otherwise only has read-only access to the
Gateway interface.
Chapter 2
Installing the Cisco IPVC 3500 Series Gateway
OL-7995-01