Sd Card Care; Creation Of A Boot Disk; Cf (Compactflash) Card - Toshiba Portege M300 User Manual
Portable personal computer
Hide thumbs
Also See for Portege M300:
- Maintenance manual (380 pages) ,
- User manual (218 pages) ,
- Specifications (4 pages)
Table of Contents
Advertisement
SD card care
Set the write-protect switch to the lock position, if you do not want to record
data.
1. Do not write to an SD card if the battery power is low. Low power could
affect writing accuracy.
2. Do not remove an SD card while read/write is in progress.
3. The SD card is designed so that it can be inserted only one way. Do not
try to force the SD card into the SD card slot.
4. Do not leave an SD card partially inserted in the slot. Press the SD card
until you hear it click into place.
5. Do not twist or bend SD cards.
6. Do not expose SD cards to liquids or store in humid areas or lay media
close to containers of liquid.
7. After using an SD card, return it to its case.
8. Do not touch the metal part or expose it to liquids or let it get dirty.
Creation of a boot disk
In TOSHIBA SD Memory Boot Utility, a boot disk can be created with SD
memory card. Refer to the
CF (CompactFlash) card
This slot accommodates CF card. You cannot use CF card that does not
conform to CF card Association specifications.
Do not turn off the power or remove or reinsert a card while data is
being written or read. Data could be destroyed. Wait for the indicator to
go out.
Do not touch the card's connector. You could expose the storage area
to static electricity, which can destroy data.
Hold the card straight when you insert or remove it.
Pull the card completely out when you remove it. Do not leave it
partially inserted.
User's Manual
Utilities
of Chapter 1, Introduction for details.
Optional Devices
8-5
Advertisement
Table of Contents
