Introduction - Thermador PD304 Installation Instructions Manual
Professional dual fuel ranges
Hide thumbs
Also See for PD304:
- Care and use manual (144 pages) ,
- Installation instructions manual (72 pages) ,
- Installation instructions manual (48 pages)
Table of Contents
Advertisement
The Thermador Professional
ing units available in a number of configurations.
Model PD304 is equipped with four sealed gas
surface burners and a 30-inch electric convection
self-cleaning oven with broil capability. Models
PD364GD, PD364GL, and PD366 feature a gas cook-
ing surface with four sealed gas surface burners with
either a griddle or grill or six sealed gas surface
burners plus a 36-inch electric convection, self-clean-
ing oven with broil capability. Models PD484GG,
PD486GD, and PD486GL feature a gas cooking
surface with four sealed burners, griddle and grill, six
sealed burners and a griddle, or six sealed burners
and a grill. PD48 Ranges provide a large electric
convection, self-cleaning oven (the same as used in
the PD36 Ranges) and a small electric oven with bread
proofing and warming features as well as bake and
broil capability.
GAS TYPE VERIFICATION
Verify the type of gas supplied to the location.
Ensure that the appliance is connected to the type
of gas for which it is certified. All models are certified
for use with natural gas. Field conversion of the
appliance for use with propane gas supply will
require a conversion kit.
Introduction
®
Ranges are free stand-
Page 2
CAUTION
When connecting the unit to propane gas,
make certain the propane gas tank is equipped
with its own high-pressure regulator in addition
to the pressure regulator supplied with the
range. The maximum gas pressure to this
appliance must not exceed 14.0 inches water
column (34.9 millibars) from the propane
gas tank to the pressure regulator.
IMPORTANT
•
A backguard must be utilized when there is less
than a 12" horizontal clearance between com-
bustible materials and the back edge of the
range. The Thermador Low Back backguard
must be ordered separately and installed at the
rear of the range. For island installations and
other installations with more than 12" clearance,
an optional stainless steel Island Trim is available
to cover the backguard mounting flanges.
•
Verify that the appliance is correct for the type of
gas being provided. Refer to Step 5 on Page 16
before proceeding with the installation.
Advertisement
Table of Contents
