Table of Contents
Advertisement
Notes
When FORMAT... is set to the following, you cannot select
the input number.
– when BKM-61D is installed and Analog Y/C signal is
input
– when BKM-62HS is installed and Dual Link HD-SDI
signal is input
– when BKM-68X is installed and Analog Component
or Analog RGB signal is input
Structure of the INPUT
CONFIGURATION Menu
Level 1
Level 2
CHxx
FORMAT... [C1]
SDI/HD-SDI... [C11]
DUAL LINK HD-SDI...
[C12]
COMPOSITE... [C13]
YC... [C14]
COMPONENT... [C15]
SLOT NO
INPUT NO
SCREEN ASPECT
SCAN SIZE
SYNC MODE
COLOR TEMP
PICTURE PRESET
MATRIX... [C2]
APERTURE
VALUE
YC SEP
NTSC COMB FILTER
MARKER DISPLAY
MODE... [C3]
H PHASE
CHANNEL NAME...
[C4]
COPY FROM... [C5]
OTHER CH... [C51]
(available in software
OTHER MONITOR...
version 1.10 or
[C52]
higher)
MEMORY STICK...
[C53]
Setting Lists in the INPUT
CONFIGURATION Menu
This section explains the setting lists displayed in the
menu.
How to read the setting lists
• For purposes of explanation, each setting list is preceded
by a menu number. These numbers are not displayed on
the screen.
For more information on the menu number, see "About
menu numbers" on page 23.
• The arrow mark (k) refers you to another setting list
that appears after you make the setting, or to an operation
Level 3
that is to be carried out as a result of the setting.
[C] INPUT CONFIGURATION menu
This menu is composed by the INPUT
CONFIGURATION (1/2) and INPUT
CONFIGURATION (2/2) menus.
Set input signal data for each channel.
INPUT CONFIGURATION (1/2) menu
CHxx: Current channel is indicated. The settings
FORMAT...: Select the input signal type. k[C1]
SLOT NO: Enter the option slot number (OPTION1 to
INPUT NO: Enter the input connector number.
SCREEN ASPECT: Select the aspect ratio (16:9, 4:3,
SCAN SIZE...: Select the scan size (NORMAL,
SYNC MODE: Select the sync signal (INT, EXT,
OTHER MONITOR
[C521]
MEMORY STICK
[C531]
COLOR TEMP: Select the color temperature (D93,
[C] Setting the Input Configuration – INPUT CONFIGURATION Menu
below will be stored as information about the signal
to be connected to this channel.
3).
LAST).
16:9: Set the aspect ratio to 16:9 (default).
4:3: Set the aspect ratio to 4:3.
LAST: Use the previous setting.
UNDER, LAST).
NORMAL: Set the scan size to over scan (default).
UNDER: Set the scan size to under scan.
LAST: Use the previous setting.
LAST).
INT: Use an internal sync signal (default).
EXT: Use an external sync signal.
LAST: Use the previous setting.
D65, D61 or USER1 to 5).
When D93, D65 or D61 data is changed, they are
displayed as D93*, D65* or D61*.
35
- Quick Links:
- Precautions
- Features
- Input Adaptors
- Specifications
Hide quick links:
Advertisement
Table of Contents
