Table of Contents
Advertisement
Chapter 7
HPSS User Interface Configuration
Option
s string
t
u
v
z
A
C
Dstring
Fstring
G
424
Table 7-1 Parallel FTP Daemon Options
Description
Specify the syslog facility for the HPSS PFTPD. The syntax on the -s
option is -slocal7. The default syslog facility is LOG_DAEMON
(reference: /usr/include/sys/syslog.h). Alternatives are local0 - local7.
Incorrect specification will default back to LOG_DAEMON. To make
use of the alternates, modify /etc/syslog.conf to use the alternate
facility. Note, the file specified in the /etc/syslog.conf must exist prior
to initialization/refresh of the syslogd. No space is allowed between the
s and the facility specifier.
Read the hpss_option DTO <value> option from the {ftpaccess} file
to obtain the default timeout in seconds. Refer to documentation on the
{ftpaccess} file for details.
Read the hpss_option UMASK <value> option from the {ftpaccess}
file to obtain the default umask to be applied. Refer to documentation
on the {ftpaccess} file for details
Increment the Client API Logging Specification. The Client API will
perform logging specified by the HPSS_DEBUG environment variable
in a file specified by the HPSS_DEBUGPATH environment variable
(default name is /var/hpss/ftp/adm/hpss_ftpd.log.) The default value
for the "v" option is 1. (No "v" option required.) Future
implementation may allow for increasing the value to either 2 or 3 to
obtain additional Client API information. This would be accomplished
by specifying 1 or 2 "v" options on the hpss_pftp startup line.
Sleep for 15 seconds at initialization. Useful when attempting to attach
to the HPSS PFTP Daemon with the debugger.
Enable Passive Connections. Note: Not supported in the HPSS Parallel
FTP Daemon for parallel operations. Client requests to use passive
mode will be rejected.
Disable the ability for clients to explicitly set the Class of Service for
new files (via the "site setcos" command).
Set the {FTPBaseDir} path. Default: /var/hpss/ftp. This directory
must contain several sub-directories including: adm, bin, daemon, and
etc. Specific files/sub-directories are located in each of these
subdirectories - etc: ftpaccess, [ftpbanner], ftppasswd, ftpusers, and
[trusted_hosts]. adm: [daemon.syslog], [hpss_ftpd.log], [xferlog].
daemon: ftpd/ftp.pids-hpss_class. [ ] implies optional others are
required. etc/ftppassed is optional if the -S or -X options are specified.
Set the {FTP_FtpAccessFile}. Default: ftpaccess. Located in the
directory {FTPBaseDir}/etc.
Read the hpss_option AMGR <string> from the ftpaccess file to
obtain the path/name of the Authentication Manager to be used. Refer
to documentation on the ftpaccess file for details.
September 2002
HPSS Installation Guide
Release 4.5, Revision 2
Advertisement
Table of Contents
