hit counter script
Toshiba Satellite M300 Maintenance Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Satellite M300
  6. Maintenance manual
Toshiba Satellite M300 Maintenance Manual

Toshiba Satellite M300 Maintenance Manual

Personal computer
Hide thumbs Also See for Satellite M300:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Maintenance Manual, User Manual
Toshiba Personal Computer
Satellite M300
Satellite Pro M300
Maintenance Manual
TOSHIBA CORPORATION
File Number 960-Q08

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Satellite M300

Summary of Contents for Toshiba Satellite M300

  • Page 1 Toshiba Personal Computer Satellite M300 Satellite Pro M300 Maintenance Manual TOSHIBA CORPORATION File Number 960-Q08...
  • Page 2 © 2003 by Toshiba Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed with respect to the use of the information contained herein.
  • Page 3 NOTE: “Note” contains general information that relates to your safe maintenance service. Improper repair of the computer may result in safety hazards. Toshiba requires service technicians and authorized dealers or service providers to ensure the following safety precautions are adhered to strictly.
  • Page 4 The manual is divided into the following parts: Chapter 1 Hardware Overview describes the Satellite M300 and Satellite Pro M300 system unit and each FRU. Chapter 2 Troubleshooting Procedures explains how to diagnose and resolve FRU problems. Chapter 3 Test and Diagnostics describes how to perform test and diagnostic operations for maintenance service.
  • Page 5 Text that you are instructed to type in is shown in the boldface type below: DISKCOPY A: B: The display Text generated by the computer that appears on its display is presented in the typeface below: Format complete System transferred Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 6: Table Of Contents

    Power Supply Troubleshooting ..................7 Procedure 1 Power Status Check ..............7 Procedure 2 Error Code Check ..............9 Procedure 3 Connection Check..............10 Procedure 4 Charging Check ...............10 Procedure 5 Replacement Check ..............12 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 7 Diagnostic Test Program Execution Check ......31 Procedure 2 Connector Check and Replacement Check......32 Touch pad Troubleshooting ..................33 Procedure 1 Diagnostic Test Program Execution Check ......33 Procedure 2 Connector Check and Replacement Check......34 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 8 Diagnostic Test Program Execution Check ......49 Procedure 2 Connector Check and Replacement Check......49 Chapter 3 Test Program for Field Tests and Diagnostics Software Overview ..............3-3 Executing the Diagnostic Test ................... 3-4 Subtest names......................3-8 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 9 3.21 Tests an Operation ..................3-62 Common 3.21.1 How to operate a window …………………………………………3-62 ..3.21.2 How to Stop the Test Program ……………………………………. 3-62 ..3.21.3 Test Status Screen …………………………………………………3-62 ..Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 10 4.12 Audio board ......................4-39 4.13 Lan board ......................... 4-40 4.14 System board......................4-44 4.15 CPU..........................4-47 4.16 LCD unit / FL inverter ..................... 4-50 4.17 Application for grease(Denka FCR-AS) on North Bridge………………………..4-55 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 11 Appendix D Keyboard Scan/Character Codes ..............D-1 Appendix E Key Layout.....................E-1 Appendix F Wiring Diagrams.................... F-1 Appendix G BIOS Rewrite Procedures ................G-1 Appendix H EC/KBC Rewrite Procedures................ H-1 Appendix I Reliability......................I-1 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 12: Chapter 1 Hardware Overview

    Chapter 1 Hardware Overview Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08)

  • Page 13: Inch Hard Disk Drive

    Keyboard........................17 TFT Color Display.......................18 1.6.1 LCD Module ..................18 1.6.2…..CCFL Invertor Board………………………………………………… ..21 Power Supply .......................22 Batteries ........................23 1.8.1 Main Battery...................23 1.8.2 Battery Charging Control ...............24 1.8.3 RTC battery ....................25 AC Adapter ........................26 Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08)
  • Page 14 Battery specifications..................24 Table 1-11 Time required for charges of main battery ............25 Table 1-12 Data preservation time ..................25 Table 1-13 Time required for charges of RTC battery............26 Table 1-14 AC adapter specifications ................27 Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08)

  • Page 15: Features

    Chapter 1 Hardware Overview Features Features The Satellite M300 (Intel Platform) series are 2 spindle PCs running Intel® Celeron® Processor 540 or higher. Intel® Core™ 2 Duo Processor (667MHz) T5450 or higher. Intel® Core™ 2 Duo Processor (800MHz) T8100 or higher.
  • Page 16 Supported via a RGB connector. θ Keyboard Toshiba Standard keyboard with 86-88 keys (desktop-style), Support Windows keys & Application keys. (Toshiba standard layout) Standard pitch, 2.5mm travel length. Multi-langue support. θ Optical devices A Combo drive or DVD Super Multi or HD-DVD Rom drive is equipped.
  • Page 17 XD/MS/MS pro/SD/MMC are supported θ Bluetooth USB Bluetooth Module (BTO) V2.1 & EDR(Enhanced Data Rate) equipped θ Security Kensington Lock, Fingerprint –Enhanced Lock is also equipped. HDD Password 3D Accelerometer for HDD Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q02)

  • Page 18: Figure 1-1 Front Of The Computer

    Chapter 1 Hardware Overview Figure 1-1 Front of the computer Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q02)

  • Page 19: System Block Diagram

    Chapter 1 Hardware Overview System Block Diagram Figure 1-2 shows the system block diagram. Figure 1-2 System block diagram for Intel Platform Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q02)
  • Page 20 • 1.8V operation • PC2 5300 support/PC2 θ BIOS ROM (Flash memory) • 8Mbit θ Chipset (Santa Rosa Platform) This gate array has the following elements and functions. • North Bridge (Intel GM965/GL960) Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q02)
  • Page 21 − 676-pin 31mmx31mm mBGA Package θ PC card controller (CB1410, ENE Technology INC.) − PCI Interface (PCI Rev. 2.2) − PC Card Controller θ Other main system chips • Clock Generator (Santa Rosa Platform: ICS9LPRS365BGLF) Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q02)
  • Page 22 The transfer speed of data receiving is 56kbps, of data sending is 33.6kbps and of FAX is 14.4kbps. Actual speed depends on the quality of the line used. Connected to telephone line through RJ11 MOD θ Blue tooth Mini USB Bluetooth Module (BTO) V2.1. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q02)

  • Page 23: Inch Hard Disk Drive

    69.8 (mm) Height Outline (mm) Dimensions Depth 100.0 (mm) Weight Standard value Parameter Fujitsu Fujitsu Fujitsu Fujitsu MHY2120BH MHY2160BH MHY2200BH MHY2250BH Width (mm) Height Outline (mm) Dimensions Depth (mm) Weight (g) Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q02)

  • Page 24: Table 1-2 2.5-Inch Hdd Specifications

    Fujitsu Fujitsu Fujitsu MHY2120BH MHY2160BH MHY2200BH MHY2250BH storage 120GB 160GB 200GB 250GB size(formatted) Speed (RPM) 5400 Data transfer Rate - 84.6MB/s To/From Media - 1.5Gbps(150MB/s) T0/From Host bus transfer rate 1.5Gbps(150MB/s) Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q02)
  • Page 25 Data transfer Rate - To/From 665 (Mb/s), (max) Media - T0/From Host bus transfer 150 (MB/s rate (MB/s) Average random seek 11 ms time (read) (ms) Power-on-to- 3.5 sec ready (sec) Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q02)

  • Page 26: Optical Drive

    Figure 1-4 DVD-ROM & CD-R/RW drive Table 1-3 DVD-ROM & CD-R/RW drive outline dimensions Parameter Standard value TEAC Maker DW-224E-VT7 Width (mm) 127.7 Outline Height (mm) 12.7 dimension Depth (mm) 126.1 Mass (g) 173 or less Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q02)

  • Page 27: Table 1-4 Dvd-Rom & Cd-R/Rw Drive Specifications

    CD-ROM XA MODE2 (Form1, Form2) Photo CD (Single/Multi-session) CD-I Video-CD CD-Extra (CD-Plus) CD-Text Supported disk format DVD-ROM DVD-Video DVD-R (Single/Multi-border) DVD-R DL (Single/Multi/border) DVD-RW (Single/Multi-border) DVD+R (Single/Multi-session) DVD+R DL (Single/Multi-session) DVD+RW (Single/Multi-session) DVD-ROM (4.7GB, 2.6GB) Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q02)

  • Page 28: 2Dvd Super Multi Drive

    Table 1-5 DVD Super Multi drive outline dimensions Parameter Standard Value Maker TS-L632P DVR- DVR- L632H KD08TBT KD08TBL Width 122.4 122.4 (mm) Outline Height 12.7 12.7 12.7 12.7 dimension (mm) Depth (mm) Mass 176.2 176.2 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q02)

  • Page 29: Table 1-6 Dvd Super Multi Drive Specifications

    33.3(UltraDMA Mode2) 130 ms 130 ms Ave.140(CD-ROM Ave.140(CD-ROM CD-ROM Mode1Disc is used) Mode 1 Disc is used) Access time (ms) (Random) DVD-ROM 130 ms 130 ms Ave.150 Ave.150 (DVD-ROM Single (DVD-ROM Single Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q02)
  • Page 30 4.7G DVD+- 4.7G DVD+- R/RW (Read & R/RW (Read & Write) Write) DVD+-R Dual DVD+-R Dual (Read & Write) (Read & Write) DVD-RAM DVD-RAM (Read (Read & Write) &Write)80mm 80mm DVD Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q02)

  • Page 31: Keyboard

    Figure 1-6 is a view of the keyboard for US/UK style Figure 1-6 Keyboard for US/UK style Figure 1-7 is a view of the keyboard for JP style Figure 1-6-1 Keyboard for JP style Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q02)

  • Page 32: Figure 1-7 Lcd Module

    Chapter 1 Hardware Overview See Appendix E for details of the keyboard layout. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q02)

  • Page 33: Tft Color Display

    Chapter 1 Hardware Overview TFT Color Display The Satellite M300 Panel has 1 model, CCFL backlight. 1.6.1 LCD Module with CCFL Backlight Figure 1-7 ~ 1-10 shows a view of the LCD module and Table 1-7 lists the specifications. Figure 1-7 LG-Philips LCD Module...
  • Page 34 Chapter 1 Hardware Overview Figure 1-8 AUO LCD Module Figure 1-9 Samsung LCD Module Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q02)

  • Page 35: Table 1-7 Lcd Module Specifications

    Chapter 1 Hardware Overview Figure 1-10 CMO LCD Module Table 1-7 LCD module specifications Specifications(WXGA) Samsung Item LP141WX3- B141EW04 V4 LTN141AT03- N141I3-L02 TLN1 Number of 1,280x 800 Dots Dot spacing 0.237(H)× 0.237(V) (mm) Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q02)

  • Page 36: Table 1-8 Fl Inverter Board Specifications

    SUMIDA Item T18I095.00 DAC-08N035 TWS-449-308 TBD485NR Voltage (V) 8~20 8~20 8~20 8~20 Input Power (W) 7.5W 7.5W 7.5W 7.5W Voltage (Vrms) 612~945 612~945 612~945 612~945 Output Current 2.3±0.4 ~ 6.5±0.3 (f=55KHz)(mArms) Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q02)

  • Page 37: Power Supply

    No Battery Suspend mode Boot mode +5VPCU +5V_S5 +5VSATA USBPWR +5V_TP VCCRTC TH_FAN_POWER 3.1~5 +3VPCU +3V_S5 +3VSUS CCD_POWER +5V_Felica VCC_XD +1.8VSUS +1.8V +1.5V 1.25 +1.25V +1.05V 1.05 +SMDDR_VREF +SMDDR_VTERM 0.55~1.575 VCC_CORE Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q02)

  • Page 38: Batteries

    1.8.1 Main Battery The main battery is the primary power supply for the computer when the AC adapter is not connected. In Standby, the main battery maintains the current status of the computer. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q02)

  • Page 39: 2Battery Charging Control

    About 1 month Battery 3 cell Approximately 1.5 days(sleep mode) Pack 6 cell Approximately 3 days(sleep mode) 9 cell Approximately 5 days(sleep mode) Approximately 1 month(shutdown mode, All type of battery pack Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q02)

  • Page 40: 3Rtc Battery

    Table 1-13 lists the Time required for charges of RTC battery and data preservation time. Table 1-13 Time required for charges of RTC battery Condition Time Power ON (Lights Power LED) About 24 hours Data preservation tome (Full-charged) About a month Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q02)

  • Page 41: Ac Adapter

    Specification With Led DELTA/ LITE-ON DELTA/ LITE-ON Power Input voltage AC 100V/240V AC 100V/240V Input frequency 50Hz/60Hz Input current ≦ 1.5A ≦ 1.5A Output voltage DC 19V Output current 4.74A 3.95A Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q02)

  • Page 42: Troubleshooting Procedures

    Chapter 2 Troubleshooting Procedures Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08...
  • Page 43 Diagnostic Test Program Execution Check ......31 Procedure 2 Connector Check and Replacement Check......32 Touch pad Troubleshooting ..................33 Procedure 1 Diagnostic Test Program Execution Check ......33 Procedure 2 Connector Check and Replacement Check......34 Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08)
  • Page 44 Diagnostic Test Program Execution Check ......48 Procedure 2 Connector Check and Replacement Check......48 2.17 Bluetooth Troubleshooting ..................49 Procedure 1 Diagnostic Test Program Execution Check ......49 Procedure 2 Connector Check and Replacement Check......49 Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08)

  • Page 45: Troubleshooting

    2. Implements for debugging port check • Toshiba MS-DOS system FD • RS-232C cross cable • Test board with debug port test cable • PC for displaying debug port test result Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 46 There are following two types of connections in the figure of board and module connection in and after 2.3 Power Supply Troubleshooting. (1) Cable connection is described in the figure as line. (2) Pin connection is described in the figure as arrow. <e.g.> Connection of modem Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 47: Troubleshooting Flowchart

    Before going through the flowchart steps, verify the following: Ask him or her to enter the password if a password is registered. Verify with the customer that Toshiba Windows is installed on the hard disk. Non- Windows operating systems can cause the computer to malfunction.
  • Page 48 2 Troubleshooting Procedures Figure 2-1 Troubleshooting flowchart (1/2) Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 49 2 Troubleshooting Procedures Figure 2-1 Troubleshooting flowchart (2/2) Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 50 13. If an error is detected on the fingerprint test, perform the fingerprint Troubleshooting Procedures in Section 2.16. 14. If an error is detected on the Bluetooth test, perform the Bluetooth Troubleshooting Procedures in Section 2.17. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 51: Power Supply Troubleshooting

    (even intervals) Blinks orange once The system is driven by only a battery and the battery level (at being switched on) is low. Doesn’t light Any condition other than those above. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 52: Error Code Check

    Other Error Bad Command Error Address Mark Not Found Write Protected Record Not Found Media Change Line Error DMA Overrun Error DMA Boundary Error Select Media Error CRC Error FDC Error Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 53 Drive Not Ready Undefined Error Write Fault Status Error No Sense Error Other Error Cache Memory Protect Mode Error Caching Error Other Error Multimedia Write Error Invalid Drive Drive Not Ready Other Error Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 54: Procedure 3 Connection Check

    The battery’s temperature is too high or low. Leave the battery for a while to adjust it in the right temperature. If the battery pack is still not charged, go to Check 5. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 55 2 Troubleshooting Procedures Check 5 Replace the battery pack with a new one. If the battery pack is still not charged, go to Procedure 5. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 56: Procedure 5 Replacement Check

    Battery pack may be faulty. Replace it with a new one. If the problem still occurs, perform Check 2. Check 2 System board may be faulty. Replace it with a new one. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 57: System Board Troubleshooting

    Start with Procedure 1 and continue with the other procedures as instructed. The procedures described in this section are: Procedure 1: Message Check Procedure 2: Debugging Port Check Procedure 3: Diagnostic Test Program Execution Check Procedure 4: Replacement Check Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 58: Procedure 1

    Go to Procedure 3. WARNING: RESUME FAILURE. PRESS ANY KEY TO CONTINUE. If any other error message displays, perform Check 3. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 59 (17) PIC #2 ERROR (18) KBC ERROR (19) HDC ERROR (20) HDD #0 ERROR (21) HDD #1 ERROR (22) NO FDD ERROR (23) FDC ERROR (24) TIMER INTERRUPT ERROR (25) RTC UPDATE ERROR Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 60: Debugging Port Check

    Initialize caches to initial POST values Initialize I/O component Initialize the local bus IDE Initialize Power Management Load alternate registers with initial POST values Restore CPU control word during warm boot Initialize PCI Bus Mastering devices Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 61 Initialize POST display service Display prompt "Press F2 to enter SETUP" Disable CPU cache Test RAM between 512 and 640 KB Test extended memory Test extended memory address lines Jump to UserPatch1 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 62 Initialize security engine (optional) Enable hardware interrupts Determine number of ATA and SCSI drives Set time of day Check key lock Initialize Typematic rate Erase F2 prompt Code Beeps POST Routine Description Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 63 PnPnd dual CMOS (optional) Initialize notebook docking (optional) Initialize notebook docking late Force check (optional) Extended checksum (optional) Unknown interrupt Code Beeps For Boot Block in Flash ROM Initialize the chipset Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 64 System memory test Initialize interrupt vectors Initialize Run Time Clock Initialize video Initialize System Management Mode 1 Output one beep before boot Boot to Mini DOS Clear Huge Segment Boot to Full DOS Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 65: Procedure 3 Diagnostic Test Program Execution Check

    If an error is detected during these tests, go to Procedure 4. Procedure 4 Replacement Check System board may be faulty. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures and replace system board with a new one. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 66: Usb Fdd Troubleshooting

    Procedure 2. Detailed operation is given in Chapter 3, Tests and Diagnostics. If the test program cannot be executed on the computer, go to Procedure 3. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 67: Diagnostic Test Program Execution Check

    “write enable”. If any other message appears, perform Check 2. Write protected Check 2 Make sure the floppy disk is formatted correctly. If it is, go to Procedure 3. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 68: Procedure 3 Connector Check And Replacement Check

    1. Cable can not be disconnected from the connector. 2. Cable is connected straight to the connector. 3. Cable is connected all the way seated in the connector. 4. Cable can not be broken. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 69 If it does not work properly when connected to CN12, CN19, CN20 or all ports, perform Check 4. Check 4 System board may be faulty. Replace it with a new one following the steps in Chapter 4, Replacement Procedures. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 70: Hdd Troubleshooting

    User’s Manual. Procedure 1 Partition Check Insert the Toshiba MS-DOS system disk and start the computer. Perform the following checks: Input C: and press Enter. If you cannot change to drive C, go to Check 2. If you Check 1 can change to drive C, go to Procedure 2.

  • Page 71: Message Check

    2.5” HDD(s) and the connector(s) of system board may be defective (Refer to the steps described in Chapter 4, Replacement Procedures for disassembling.). Insert HDD(s) to the connector(s) firmly. If it is (or they are) firmly connected, go to Procedure 3. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 72: Format Check

    Using the Diagnostic Disk, format 2.5” HDD with a format option (physical format). If HDD is formatted, set the 2.5” HDD partition using MS-DOS FDISK command. If you cannot format 2.5” HDD using the Tests and Diagnostic program, go to Procedure 4. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 73: Diagnostic Test Program Execution Check

    HDD - DRIVE NOT READY HDD - WRITE FAULT HDD - STATUS ERROR HDD - BAD SECTOR HDD - ACCESS TIME ERROR HDD - NO HDD HDD - DMA CRC ERROR Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 74: Procedure 5 Connector Check And Replacement Check

    Chapter 4, Replacement Procedures and check the operation. If the problem still occurs, perform Check 3. Check 3 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 75: Keyboard Troubleshooting

    ONE TEST) in the Diagnostic Program. Refer to Chapter 3, Tests and Diagnostics, for more information on how to perform the test program. If an error occurs, go to Procedure 2. If an error does not occur, keyboard is functioning properly. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 76: Procedure 2 Connector Check And Replacement Check

    Chapter 4, Replacement Procedures. If the problem still occurs, perform Check 3. Check 3 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 77: Touch Pad Troubleshooting

    3, Tests and Diagnostics, for more information on how to perform the test program. If an error occurs, go to Procedure 2. If an error does not occur, touch pad is functioning properly. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 78: Procedure 2 Connector Check And Replacement Check

    Chapter 4, Replacement Procedures. If the problem still occurs, perform Check 3. Check 3 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 79: Display Troubleshooting

    Insert the Diagnostics disk in the USB FDD, turn on the computer and run the test. Refer to Chapter 3, Tests and Diagnostics for details. If an error is detected, go to Procedure 3. Satellite M300 and Satellite Pro M300 Maintenance Manual...

  • Page 80: Connector And Cable Check

    Disassemble the computer following the steps described in Chapter 4, Replacement Procedures. If the connection is loose, reconnect firmly and restart the computer. If the problem still occurs, go to Procedure 4. Satellite M300 and Satellite Pro M300 Maintenance Manual...

  • Page 81: Procedure 4 Replacement Check

    Chapter 4, Replacement Procedure and test the display again. If the problem still occurs, perform Check 5. Check 5 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedure. Satellite M300 and Satellite Pro M300 Maintenance Manual...

  • Page 82: Optical Disk Drive Troubleshooting

    Optical disk drive may be faulty. Replace it with a new one following the steps in Chapter 4. If the problem still occurs, perform Check 3. Check 3 System board may be faulty. Replace it with new one following the instructions in Chapter 4. Satellite M300 and Satellite Pro M300 Maintenance Manual...

  • Page 83: Modem Troubleshooting

    LAN board by modem cable. If modem malfunctions, the connection of cable, board and module may be defective. Otherwise, they may be faulty. Disassemble the computer following the steps described in Chapter 4 and perform the following checks: Satellite M300 and Satellite Pro M300 Maintenance Manual...
  • Page 84 Troubleshooting Procedures Check 1 Make sure the following connections are firmly connected. If any connector is disconnected, connect it firmly and return to Procedure 1. If the problem still occurs, perform Check 2. Satellite M300 and Satellite Pro M300 Maintenance Manual...
  • Page 85 Chapter 4. If the problem still occurs, perform Check Check 6 System board may be faulty. Replace it with a new one following the instruction in Chapter 4. Satellite M300 and Satellite Pro M300 Maintenance Manual...

  • Page 86: Lan Troubleshooting

    LAN cable may be faulty. Replace it with a new one. If the problem still occurs, perform Check 3. Check 3 System board may be faulty. Replace it with a new one following the instruction in Chapter 4. Satellite M300 and Satellite Pro M300 Maintenance Manual...

  • Page 87: Wireless Lan Troubleshooting

    LAN. Perform the test following the instructions described in Chapter 3. If the computer passes the test, the function is correctly working. If the computer does not pass the test, perform Procedure 2. Satellite M300 and Satellite Pro M300 Maintenance Manual...

  • Page 88: Antennas' Connection Check

    Wireless LAN card. If wireless LAN antenna cables are not connected properly, connect them firmly and perform Procedure 1. If the problem still occurs, go to the procedure 3. Satellite M300 and Satellite Pro M300 Maintenance Manual...

  • Page 89: Procedure 3 Replacement Check

    Chapter 4, Replacement Procedures. If the problem still occurs, perform Check 3. Check3 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. Satellite M300 and Satellite Pro M300 Maintenance Manual...

  • Page 90: Sound Troubleshooting

    The connection of sound system is shown in the following figure. As the connection may be defective, disassemble the PC and check each connection. If the problem still occurs, go to Procedure 2. Satellite M300 and Satellite Pro M300 Maintenance Manual...

  • Page 91: Procedure 2 Replacement Check

    Chapter 4. If the problem still occurs, perform Check 6. Check 6 Audio board/System board may be faulty. Replace it with a new one following the instructions in Chapter 4. Satellite M300 and Satellite Pro M300 Maintenance Manual...

  • Page 92: Fingerprint Troubleshooting

    Fingerprint may be faulty. Replace it with a new one following the steps in Chapter 4. If the problem still occurs, perform Check 4. Check 4 System board may be faulty. Replace it with a new one following the instruction in Chapter 4. Satellite M300 and Satellite Pro M300 Maintenance Manual...

  • Page 93: Bluetooth Troubleshooting

    Bluetooth may be faulty. Replace it with a new one following the steps in Chapter 4. If the problem still occurs, perform Check 4. Check 4 System board may be faulty. Replace it with a new one following the instruction in Chapter 4. Satellite M300 and Satellite Pro M300 Maintenance Manual...
  • Page 94 Replacement Procedures Chapter 4 Replacement Procedures Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 95 Touch pad......................... 4-39 4.12 Lan board…………………………………………………………………………...4-42 4.13 System board......................4-43 4.14 CPU..........................4-46 4.15 LCD unit / FL inverter ..................... 4-49 4.16 Application for thermal pad (T-Flex340) on North Bridge,VGA and V-RAM… 4-55 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08) 4-ii...
  • Page 96 Figure 4-27 Remove the CPU heat sink ................4-46 Figure 4-28 Remove the CPU....................4-47 Figure 4-29 Apply silicon grease..................4-48 Figure 4-30 Remove the display mask................. 4-50 Figure 4-31 Remove the FL inverter ................... 4-51 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08) 4-iii...
  • Page 97 Figure 4-33 Removing the LCD supports................4-53 Figure 4-34 Thermal Pad on North bridge(Intel without VGA board)……………………4-55 Figure 4-35 Thermal Pad on North bridge(Intel with VGA board)…………………...…..4-56 Figure 4-36 Thermal Pad on VGA and V-RAM…………………………………………..4-56 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08) 4-iv...

  • Page 98: Chapter 4 Replacement Procedures

    The chart shows the case for the following example: • Removing a MDC All FRUs down to the “4.2 Battery pack” to “4.11 Cover assembly” above a SD board/Microphone/MDC must be removed. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 99: Safety Precautions

    4. When connecting to the AC power supply, use only an AC adapter and cable approved by Toshiba. 5. To prevent electric shock, ensure that all replacement parts are compatible with the computer and that all cables and connectors are securely connected. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 100: Before You Begin

    Screw sizes are noted in the text and figures. 9. As all parts have sharp edges and corners, take care not to cut yourself. 10. After replacing an FRU, check that the computer and replaced part operate correctly. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 101: Disassembly Procedure

    Normal pin connectors are used for all other cables. Simply pull out or push in these connectors to disconnect or reconnect. Pressure plate connector Spring connector Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 102: Assembly Procedure

    One Philips screwdriver with type 1 bit (for screws other than above) • Tweezers (for lifting screws) • ESD mats (lay on work table or floor) • An ESD wrist strap and heel grounder • Anti-static carpet or flooring Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 103: Screw Tightening Torque

    G r ip a r e a “Special length screw” means screws whose length is indicated in an integral number to the first decimal places such as 2.5 mm, 2.8 mm and so on. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 104: Screw Notation

    Screw shape B: Bind screw F: Thin head screw S: Super thin head screw T: Tapping screw U: Other screws (Unique screws: pan head, stud, etc.) Example: B6 … 6mm bind screw Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 105: Battery Pack

    4. Slide and hold the battery release latch (1) to free the battery pack after moving the battery release lock (1) into unlock position – pick the battery pack out of the computer from fillister. Lock 1 Fillister Latch 1 Figure 4-1 Remove the battery pack Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 106 2. Disconnect the AC adapter and all external devices from the computer. 3. Attach the battery cover to the battery pack. 4. Insert the battery pack 5. Ensure the battery release lock (1) is moved into its locked position Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 107 Replacement Procedures Lock1 Figure 4-2-1 Install the battery pack Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08) 4-10...

  • Page 108: Pc Card

    NOTE: If a PC card is not inserted all the way, the eject button may not pop out. Be sure to push a PC card firmly and press the eject button again. Eject Button Figure 4-2-1 Remove a PC card Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08) 4-11...
  • Page 109 1. Make sure the eject button does not stick out. 2. Insert a PC card and press it until it is securely connected. Eject Button Figure 4-3-2 Insert a PC card Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08) 4-12...

  • Page 110: Hdd

    • M2.5×4.0B FLAT BIND screw 3. Remove the following screws securing the HDD assembly. • M2.5×4.0B FLAT BIND screw 4. Disconnect the HDD assembly from the connector on the system board. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08) 4-13...
  • Page 111 Replacement Procedures CAUTION: When a HDD is installed, they are installed in the position as the following figure. M2.5×4.0B Figure 4-4 Remove the HDD assembly Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08) 4-14...
  • Page 112 5. Remove the following screws securing the HDD holder, HDD adapt and remove the HDD holder and HDD adapt.. • M2.5×4.0B FLAT BIND screw • M2.5×4.0B FLAT BIND screw M2.5×4.0B HDD adapt M2.5×4.0B Figure 4-4 Remove a HDD Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08) 4-15...
  • Page 113 3. Insert the HDD assembly into the HDD slot and connect it carefully to the CN19 on the system board. 4. Secure the HDD assembly with the following screw. • M2.5×4.0B FLAT BIND screw Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08) 4-16...

  • Page 114: Wireless Lan Card

    3. Open the left and right latches to remove a wireless LAN card from the connector on the system board. Wireless LAN card cover with 3 screws CN30 screws Wireless LAN with 2 Wireless LAN antenna cabl e Figure 4-5 Remove a wireless LAN card Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08) 4-17...
  • Page 115 2. Connect the wireless LAN antenna cables to the terminals on a wireless LAN card. 3. Install the wireless LAN card cover and secure it with the following screws. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08) 4-18...

  • Page 116: Memory Module

    1. Loose the screws which secure the memory slot cover. • 2.5 x 4.0B BIND screw 2. Remove the memory slot cover. 3. Open the left and right latches and remove the memory module. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08) 4-19...
  • Page 117 Replacement Procedures Memory Module Cover Figure 4-6 Remove memory slot cover Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08) 4-20...
  • Page 118 Replacement Procedures Figure 4-7 Remove a memory module Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08) 4-21...
  • Page 119 Confirm that the new memory is detected correctly. 4. If the memory is not detected, check that it is connected correctly. Socket1 Socket2 Figure 4-8 Insert a memory module Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08) 4-22...

  • Page 120: Keyboard

    7. Loose the screw securing KB screws. • M2.0x3.0B BIND screws x2 8. Insert your finger into the keyboard slot and keyboard. Then lift up the keyboard to remove it. 9. Disconnect keyboard cable. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08) 4-23...
  • Page 121 Replacement Procedures M2.0x3.0B 2 screws Figure 4-9 Remove screws for KB Holder M2.0x3.0B 2 screws Figure 4-10 Remove the KB Holder Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08) 4-24...
  • Page 122 Replacement Procedures Figure 4-11 Remove the KB Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08) 4-25...
  • Page 123 BIND screw 3. Install the KB Holder 4. Turn the computer upside down 5. Secure the KB Holder with the following screw • M2.0x3.0B Flat BIND screws x2 6. Install battery. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08) 4-26...

  • Page 124: Optical Disk Drive

    2. Remove the following screw of optical disk drive BKT screw. • 2.5 x 4.0B BIND screw 3. Remove the following screw of side bracket. • 2.0 x 3.0B BIND screw Memory Module Cover Figure 4-12Remove Memory Module Cover Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08) 4-27...
  • Page 125 Replacement Procedures Optical disk drive BKT Screw Figure 4-13 Remove optical disk drive BKT screw Optical disk drive BKT PUSH Figure 4-14 Push optical disk drive Module out Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08) 4-28...
  • Page 126 3. Secure the ODD drive with the following screw. • M2.5X4.0 Flat BIND screw x 1 4. Secure the Memory Module Cover with the following screw. • M2.5×4.0B BIND screw Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08) 4-29...

  • Page 127: Top Assembly

    2. Remove the following screws securing the cover assembly from the back and bottom of computer. • M2.0×6.0 BIND screw Back • M2.5×10 BIND screw Back • M2.5×4.0 BIND screw Back • M2.0×3.0 FLAT BIND screw Back Figure 4-16 remove the screws (back) 4-30 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 128 4. Disconnect the touch pad flat cable/Fingerprint cable/Bluetooth Cable/Power board FFC/MMB Board FFC/Function Lens FFC from the connector on the system board. Remove Remove Figure 4-17 Disconnect the Cable 5. Remove the top assembly from the base assembly. 4-31 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 129 • M2.5×10 BIND screw Back • M2.5×4.0 BIND screw Back • M2.0×3.0 FLAT BIND screw Back 5. Free the cable from cable-drain when through the antenna cable to PCB hole. 4-32 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 130: Display Assembly

    2. Open the MINIPCI Door and remove the wireless LAN screws and antenna connector. Wireless LAN antenna connector Figure 4-18 Remove the Wireless LAN antenna connector 3. Open the display and removing the k/b holder and keyboard. (please refer figure 4- 9,figure4-10, figure4-11). 4-33 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 131 M2.0 X 3 big head 3 screws M2.5 X 10 3 screws M2.5 X 10 3 screws M2.5 X 4 2 screws M2.0 X 6.0 5 screws Figure 4-19 Remove the screws (from bottom side) 4-34 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 132 FFC/MMB Board FFC/Function Lens FFC from the connector on the system board. 6. Remove TOP ASSY 7. Remove LAN board ASSY and pull out the wireless LAN antenna and LCD cables from the guide 4-35 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 133 Figure 4-20 Remove the Wireless Antenna and LCD cable 8. Open the display to 100 degree, and remove the hinge screw. ‧ M2.5×5.0 BIND screw (Locktight) Wireless LAN antenna cable Figure 4-21 Remove the hinge screw 4-36 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 134 9. Pull out the pole of hinge from the hole of hinge assembly, remove the display assembly from the base assembly. Display assembly Base assembly Figure 4-22 Remove the LCD harness and remove display assembly 4-37 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 135 5. Pass the cables to the back of computer through the slot. 6. Arrange the wireless LAN antenna along the guide and contact with the connector. 7. Install the LAN board and top ASSY of the system. 4-38 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 136: Touch Pad

    2. Remove the following screws securing the touch pad plate and touch pad board. • M2.0×3.0 Flat screw • M2.0×3.0 BIND screw M2.0×3.0 4screws M2.0×3.0 Flat 4screws Figure 4-23 Remove the touch board and touch pad plate screw 4-39 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 137 4. Peel off and remove the touch pad from the cover assembly. touch pad plate Touch pad board touch pad Figure 4-24 Remove touch pad board and touch pad plate 4-40 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 138 4. Install the touch pad board and secure it with the following screws. • M2.0×3.0B Flat screw 5. Connect the touch pad flat cable to the connector on the touch pad and stick the glass tape on the connector. 4-41 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 139: Lan Board

    Figure 4-25 Remove the LAN board Installe the LAN Board 1. Put LAN board in correct location and fix below screw M2.0x4.0 BIND screw 2. Connect the modern cable and Lan FPC. 4-42 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 140: System Board

    2. Disconnect the speaker cable from the connector on the system board. 3. Disconnect the Antenna cable from the antenna connector. 4. Disconnect the LAN FPC from the connector on the LAN board Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 141 6. Remove the following screws securing the system board and remove the system board. (See Figure 4-26) • M2.0×4.0 BIND screw M2.0×4.0 4 screws ODD FPC M2.0×4.0 3 screws Figure 4-26-1 Remove the system board Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 142 2. Connect the LAN FPC to the LAN Board. 3. Connect the speaker cable the system board. 4. Connect the Battery cable and DC cable to the connector on the system board Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 143: Cpu

    NOTE: When removing the heat sink holder, be sure to remove the screws in the reverse order of the number marked on the holder. 3. Remove the CPU heat sink. M2.0×3.0 3 Special Spring screws Figure 4-27 Remove the CPU heat sink Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 144 Using a special applicator, apply silicon grease so that the CPU chip on the CPU is completely covered. 5. Please apply 0.15cc silicon grease (Shinetsu 7762) for each repair and apply thermal pad on North Bridge, VGA and VRAM. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 145 7. Connect the Heat sink cable to the connector on the system board NOTE: When securing the heat sink holder, be sure to secure the screws in the order of the number marked on the holder. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 146: Lcd Unit / Fl Inverter

    1. Remove the following screws securing the display mask M2.5×5.0 BIND screw X4 2. Insert your finger between the edge of the display mask and the LCD, and remove the display mask while releasing the latches of display mask. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 147 4. Disconnect the LCD harnesses from the connectors CN1 on the FL inverter. 5. Disconnect the HV harnesses from the connectors CN2 on the FL inverter. 6. Remove the FL inverter while peeling off the double-sided tape. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 148 Replacement Procedures Insulator LCD harness FL inverter Double-sided tape HV harness Figure 4-31 Remove the FL inverter Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 149 LCD unit. After peeling off the CONDUTIVE tape, disconnect the LCD harness from the connector on the back of the LCD. 9. Remove the LCD unit. M2.5×5.0 2 screws Figure 4-32 Remove the LCD unit Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 150 10. Remove the following screws securing the LCD support (LCD unit side) and remove the LCD supports from the LCD unit. • M2.0x2.5 BINK screw Figure 4-33 Remove the LCD supports Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 151 BIND screw X4 9. Cover screws with Screw rubber cover X4 NOTE: When installing the display mask, make sure there is no gap between the display mask and the display cover. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 152 Replacement Procedures 4.16 Application for Thermal Pad on North Bridge, VGA and VRAM I. For Satellite M300, Satellite Pro M300, Satellite L310, Satellite Pro L310, EQUIUM M300, SATEGO M300 (Intel without VGA board) , use Thermal Pad FSL-BS75 on North Bridge 1.Thermal Pad FSL-BS75...
  • Page 153 TE1(JXTE1027,R3A) Figure 4-36 Thermal Pad on VGA and V-RAM NOTE: When applying for thermal pad on North Bridge, VGA, V-RAM, Thermal pad is fixed for each one, no need special applicator Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 154: Appendix A Handling The Lcd Module

    LCD cover before securing the module with screws. Do not force the module into place, because stress can affect its performance. Also, the panel’s polarized surface is easily scarred, so be careful when handling it. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 155 4. If water or other liquid is left on the panel’s surface for a long period, it can change the screen’s tint or stain it. Be sure to quickly wipe off any liquid. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 156 6. CMOS-LSI circuits are used in the module, so guard against damage from electrostatic discharge. Be sure to wear a wrist or ankle ground when handling the module. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 157 8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage. 9. Do not disassemble the LCD module. Disassembly can cause malfunctions. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 158 10. If you transport the module, do not use packing material that contains epoxy resin (amine) or silicon glue (alcohol or oxide). These materials can release gas that can damage the panel’s polarization. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)

  • Page 159: Appendix B Board Layout

    Board Layout Appendix B Appendix B Board Layout System Board Figure B-1-1 System board layout (front) Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08)
  • Page 160 Board Layout Figure B-1-2 System board layout (Back) Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08)
  • Page 161 External MIC jack connector (34) CN38 HP/SPDIF jack connector (35) CN37 Card Reader connector (36) Volume wheel (37) Codec IC CX20561-12Z (38) Card reader/1394 control IC OZ129T (39) Card Bus control IC CB1410 Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08)
  • Page 162 (51) CN19 HDD connector (52) CN20 Modem module connector (53) AC cable connector (54) CPU socket (55) CN22 FAN connector (56) North Bridge (57) CN18 CRT connector (58) CN31 VGA board connector Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08)
  • Page 163 Function (01) Music Silence Button (02) Media Player Button (03) Music Play / Pause Button (04) Music Stop Button (05) Music Backward (06) Music Forward (07) MMB board (Mainstream) to M/B connector Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08)
  • Page 164 Music Silence Button (02) Media Player Button (03) Music Play / Pause Button (04) Music Stop Button (05) Music Backward (06) Music Forward (07) MMB board (Lowcost) to M/B connector (no mount Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08)
  • Page 165 Board Layout connector, only with Hotbar) Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08)
  • Page 166 Board Layout Power Board <Front layout> Figure B-3 Power board layout Table B-3 Power board connectors Location Function (01) Power Button Switch (02) LED1 Power LED (03) Power board to M/B connector Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08)
  • Page 167 Touch Pad board to Fingerprint board (01) connector(Upper) (02) Mouse Button Right key (03) Mouse Button Right key Touch Pad board to Fingerprint board (04) connector(Lower) (05) Mouse Button Left key (06) Mouse Button Left key Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08)
  • Page 168 Function (07) Touch Pad board to M/B connector for Module use (08) Touch Pad board to Touch Pad Module connector Touch Pad board to M/B connector for Fingerprint (09) board use Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08) B-10...
  • Page 169 Table B-5-1 LAN board 10/100 RJ11 layout (Front) Location Function (01) Modem signal to MDC connector (02) LAN board to M/B connector LAN board Marvell controller IC (03) 88E8040T for 10/100 88E8072 for Giga Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08) B-11...
  • Page 170 Table B-5-2 LAN board 10/100 RJ11 layout (Back) Location Function (04) USB connector (05) RJ11 connector (06) RJ45 connector (07) LAN transformer IC (08) LAN EEPROM IC (09) LAN board USB power switch Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08) B-12...
  • Page 171 Figure B-6-1 LAN board Giga FM layout (Front) Table B-6-1 LAN board Giga FM layout (Front) Location Function (01) FM tuner controller IC (02) LAN board to M/B connector LAN board Marvell controller IC (03) 88E8072 for Giga Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08) B-13...
  • Page 172 Table B-6-2 LAN board Giga FM layout (Back) Location Function (04) USB connector (05) FM RF connector (06) RJ45 connector (07) LAN transformer IC (08) LAN Flash IC (09) LAN board USB power switch Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08) B-14...
  • Page 173 Board Layout Fingerprint Board <Front layout> Figure B-7-3 Fingerprint board layout (Front) Table B-7-1 Fingerprint board layout (Front) Location Function (01) Finger Printer IC AES1610 Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08) B-15...
  • Page 174 Fingerprint board to Touch Pad Board connector (02) (Upper) (03) Fingerprint Sensor ESD protect IC Fingerprint board to Touch Pad Board connector (04) (Lower) (05) Fingerprint Flash IC (06) Fingerprint current limited IC Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08) B-16...
  • Page 175 Figure B-8 Modem board layout Table B-8 Modem board layout Location Function (01) Modem board to LAN board modem connector (02) Modem board to M/B connector (03) Modem board controller IC Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08) B-17...
  • Page 176 (01) LED7 ACIN signal detected light (02) LED3 Power signal detected light (03) LED1 Battery signal detected light (04) LED8810 HDD signal detected light (05) LED2 Card Reader signal detected light Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08) B-18...
  • Page 177 Board Layout <Back layout> Figure B-9-2 LED board layout (Back) Table B-9-2 LED board layout (Back) Location Function LED board to M/B connector (no mount connector, (06) only with Hotbar) Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08) B-19...
  • Page 178 PIN No. Signal name MIC_DATA ADOGND LED_PWR LED_PWR LED_PWR LED_PWR LED_PWR LED_PWR LED_GND6 LED_GND5 LED_GND4 LED_GND3 LED_GND2 LED_GND1 LED_EDIDCLK LED_EDIDDATA LED_TXLCLKOUT- I/O LED_TXLCLKOUT+ I/O LED_TXLOUT0- LED_TXLOUT0+ LED_TXLOUT1- LED_TXLOUT1+ LED_TXLOUT2- LED_TXLOUT2+ USBP3+_LED USBP3-_LED Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 179 +5VPCU KEY_INT 3ND_MBDATA I/O 3ND_MBCLK I/O CN3 Low Cost Function board connector P/N：DFFC10FR012 CONN SMD FFC 10P 1R FR(P1.0,H2.02) PIN No. Signal name PIN No. Signal name +3VPCU LOW_DET FN0# FN1# Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 180 P/N：DFHS30FSB28 CONN SMD HOUSING 30P 2R FS (P1.0,H3.9) PIN No. Signal name PIN No. Signal name INVCC0 LCDVCC INVCC0 LCDVCC CCD_POWER LCD_TXLCLKOUT+ I/O ADOGND LCD_TXLCLKOUT- MIC_DATA DISPON LCD_TXLOUT0+ LCD_VADJ LCD_TXLOUT0- LCD_EDIDCLK LCD_EDIDDATA I/O LCD_TXLOUT1+ LCD_TXLOUT1- USBP3+_LCD Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 181 Signal name PIN No. Signal name +5VPCU +5VPCU +5VPCU +5VPCU USB_EN#0 USBOC#0 +3V_S5 +3V_S5 FM_RIGHT FM_LEFT SB_GPIO7 FM_INT SB_GPIO27 LOM_DISABLE# USBP0- USBP0+ CLK_PCIE_LAN O CLK_PCIE_LAN# O PCIE_TXN5 PCIE_TXP5 PCIE_RXP5 PCIE_RXN5 PLTRST# PCIE_WAKE# Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 182 CN7 External Keyboard connector P/N:DFFC34FR003 CONN SMD FFC 34P,1R,FR(P0.8,H2.0) PIN No. Signal name PIN No. Signal name K_LED_P MY16 MY17 K_LED_P MY14 MY13 MY10 MY11 MY12 MY15 K_LED_P CAPSLED FN_F10 NUMLED Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 183 PCIE_RXP4 PCIE_TXN4 PCIE_TXP4 +1.5V CN10 Bluetooth module connector P/N: DFHD10MR008 CONN SMD HEADER 10P 1R MR(P1.25,H1.9) PIN No. Signal name PIN No. Signal name USBP2+ USBP2- WCS_CLK BT_RESET WCS_DAT USB_DETACH --- Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 184 PIN No. Signal name +3V_Fingerprint --- USBP1- USBP1+ CN13 LED board connector P/N:DFFC12FR285 CONN SMD FFC 12P 1R FR (P0.5,H2.2) PIN No. Signal name PIN No. Signal name +5VPCU +5VPCU BATLED1# I Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 185 P/N:DFHD26MR074 CONN SMD HEADER 26P 1R MR (P1.0,H5.4) PIN No. Signal name PIN No. Signal name USBP9-_R USBP9+_R CPUSB# NEW_SMCLK NEW_SMDATA +NEW_1.5V +NEW_1.5V PCIE_WAKE# +NEW_3VAUX PERST# +NEW_3V +NEW_3V NEW_CLKREQ# CPPE# CLK_PCIE_NEW# I Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 186 Signal name PIN No. Signal name A_CAD0 A_CAD1 A_CAD3 A_CAD5 A_CAD7 A_CC/BE0# A_CAD9 A_CAD11 A_CAD12 A_CAD14 A_CC/BE1# A_CPAR A_CPERR# A_CGNT# A_CINT# AVCC AVPP A_CCLK A_CIRDY# A_CC/BE2# A_CAD18 A_CAD20 A_CAD21 A_CAD22 A_CAD23 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 187 A_CRSVD/A18 I/O A_CBLOCK# A_CSTOP# A_CDEVSEL# AVCC AVPP A_CTRDY# A_CFRAME# A_CAD17 A_CAD19 A_CVS2# A_CRST# A_CSERR# A_CREQ# A_CC/BE3# A_CAUDIO A_CSTSCHG A_CAD28 A_CAD30 A_CAD31 A_CCD2# CN18 CRT connector P/N:DFDS15FR581 CONN DIP D-SUB 15P 2R FR(H10,P1.145) Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 188 CRTHSYNC CRTVSYNC CRTDCLK CN19 HDD connector P/N:DFHS22FR056 CONN DIP HOUSING 22P 1R FR(P1.27,H12.15) PIN No. Signal name PIN No. Signal name SATA_TXP0 SATA_TXN0 SATA_RXN0 SATA_RXP0 +3.3VSATA +3.3VSATA +3.3VSATA +5VSATA +5VSATA +5VSATA Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 189 PIN No. Signal name DIB_P DIB_N CN21 Battery cable Connector P/N: DFHD14MS014 CONN SMD HEADER 14P 2R MS(P1.5,H19.5) PIN No. Signal name PIN No. Signal name MBCLK MBDATA TEMP_MBAT O MBAT+ MBAT+ Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 190 +3V/ FANSIG CN23 HDMI connector P/N:DFHD19MR011 CONN SMD HDMI 19P 2R MR(P1.0,H6.53) PIN No. Signal name PIN No. Signal name HDMITX2P HDMITX2N HDMITX1P HDMITX1N HDMITX0P HDMITX0N HDMICLK+ HDMICLK- HDMI_DDCCLK HDMI_DDCDATA DDC5V Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 191 CN24 DDR2 SO-DIMM(200P) slot P/N:DGMK0000040 IC SOCKET DDR2 SO-DIMM(200P,H10.5,RVS) Signal name Signal name SMDDR_VREF_DIMM --- M_B_DQ4 M_B_DQ0 M_B_DQ1 M_B_DQ5 M_B_DM0 M_B_DQS#0 M_B_DQS0 M_B_DQ2 M_B_DQ6 M_B_DQ7 M_B_DQ3 M_B_DQ12 M_B_DQ13 M_B_DQ9 M_B_DQ8 M_B_DM1 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 192 Pin Assignment M_B_DQS#1 M_CLK_DDR3 M_B_DQS1 M_CLK_DDR#3 I M_B_DQ11 M_B_DQ14 M_B_DQ10 M_B_DQ15 M_B_DQ20 M_B_DQ16 M_B_DQ17 M_B_DQ21 M_B_DQS#2 PM_EXTTS#1 M_B_DQS2 M_B_DM2 M_B_DQ22 M_B_DQ18 M_B_DQ23 M_B_DQ19 M_B_DQ29 M_B_DQ24 M_B_DQ28 M_B_DQ25 M_B_DM3 M_B_DQS#3 M_B_DQS3 M_B_DQ26 M_B_DQ30 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 193 M_B_A12 M_B_A11 M_B_A9 M_B_A7 M_B_A8 M_B_A6 +1.8VSUS +1.8VSUS M_B_A5 M_B_A4 M_B_A3 M_B_A2 M_B_A1 M_B_A0 +1.8VSUS +1.8VSUS M_B_A10 M_B_BS1 M_B_BS0 M_B_RAS# M_B_WE# M_CS#2 +1.8VSUS +1.8VSUS M_B_CAS# M_ODT2 M_CS#3 M_B_A13 +1.8VSUS +1.8VSUS M_ODT3 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 194 Pin Assignment M_B_DQ37 M_B_DQ32 M_B_DQ38 M_B_DQ36 M_B_DQS#4 M_B_DM4 M_B_DQS4 M_B_DQ39 M_B_DQ34 M_B_DQ33 M_B_DQ35 M_B_DQ44 M_B_DQ40 M_B_DQ45 M_B_DQ41 M_B_DQS#5 M_B_DM5 M_B_DQS5 M_B_DQ46 M_B_DQ42 M_B_DQ43 M_B_DQ47 M_B_DQ53 M_B_DQ52 M_B_DQ49 M_B_DQ48 M_CLK_DDR4 M_CLK_DDR#4 I Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 195 M_B_DQ55 M_B_DQ54 M_B_DQ50 M_B_DQ56 M_B_DQ60 M_B_DQ57 M_B_DQ61 M_B_DM7 M_B_DQS#7 M_B_DQS7 M_B_DQ59 M_B_DQ62 M_B_DQ63 M_B_DQ58 CGDAT_SMB CGCLK_SMB CN25 DDR2 Connector P/N: DGMK0000037 IC SOCKET DDR2 SO-DIMM(200P,H6,RVS) Signal name Signal name SMDDR_VREF_DIMM --- Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 196 Pin Assignment M_A_DQ4 M_A_DQ6 M_A_DQ0 M_A_DQ5 M_A_DM0 M_A_DQS#0 M_A_DQS0 M_A_DQ7 M_A_DQ1 M_A_DQ2 M_A_DQ3 M_A_DQ13 M_A_DQ12 M_A_DQ9 M_A_DQ8 M_A_DM1 M_A_DQS#1 M_CLK_DDR0 M_A_DQS1 M_CLK_DDR#0 I M_A_DQ14 M_A_DQ10 M_A_DQ11 M_A_DQ15 M_A_DQ17 M_A_DQ16 M_A_DQ20 M_A_DQ21 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 197 M_A_DQS2 M_A_DM2 M_A_DQ23 M_A_DQ18 M_A_DQ19 M_A_DQ22 M_A_DQ28 M_A_DQ29 M_A_DQ25 M_A_DQ24 M_A_DM3 M_A_DQS#3 M_A_DQS3 M_A_DQ26 M_A_DQ30 M_A_DQ27 M_A_DQ31 M_CKE0 M_CKE1 +1.8VSUS +1.8VSUS M_A_BS#2 M_A_A14 +1.8VSUS +1.8VSUS M_A_A12 M_A_A11 M_A_A9 M_A_A7 M_A_A8 M_A_A6 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 198 M_A_A1 M_A_A0 +1.8VSUS +1.8VSUS M_A_A10 M_A_BS1 M_A_BS0 M_A_RAS# M_A_WE# M_CS#0 +1.8VSUS +1.8VSUS M_A_CAS# M_ODT0 M_CS#1 M_A_A13 +1.8VSUS +1.8VSUS M_ODT1 M_A_DQ36 M_A_DQ32 M_A_DQ37 M_A_DQ33 M_A_DQS#4 M_A_DM4 M_A_DQS4 M_A_DQ35 M_A_DQ39 M_A_DQ38 M_A_DQ34 M_A_DQ44 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 199 Pin Assignment M_A_DQ40 M_A_DQ45 M_A_DQ41 M_A_DQS#5 M_A_DM5 M_A_DQS5 M_A_DQ42 M_A_DQ43 M_A_DQ46 M_A_DQ47 M_A_DQ53 M_A_DQ48 M_A_DQ49 M_A_DQ52 M_CLK_DDR1 M_CLK_DDR#1 I M_A_DQS#6 M_A_DQS6 M_A_DM6 M_A_DQ50 M_A_DQ54 M_A_DQ51 M_A_DQ55 M_A_DQ56 M_A_DQ61 M_A_DQ60 M_A_DQ57 M_A_DM7 M_A_DQS#7 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 200 P/N:DFHS04FRB11 CONN DIP USB HOUSING 4P 1R FR(H7.6) PIN No. Signal PIN No. Signal name name BUSBP7+ BUSBP7- USBPWR CN27 Internal MINI card slot P/N:DFHD52MS146 CONN SMD HEADER,52P,2R,MS(P0.8,H9) PIN No. Signal name PIN No. Signal name +1.5V Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 201 Pin Assignment CLK_PCIE_MINI3# CLK_PCIE_MINI3 PLTRST# PCIE_RXN2 PCIE_RXP2 +1.5V PCIE_TXN2 PCIE_TXP2 +1.5V CN28 RTC battery connector P/N:DFWF02MS000 CONN SMD WAFER 2P 1R MS(P1.25) Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 202 P/N:DFWF04MS002 CONN SMD WAFER,4P,1R,MS(P1.25,H4.7) PIN No. Signal PIN No. Signal name name INSPKR-N INSPKR+N INSPKL-N INSPKL+N CN31 VGA board connector P/N:DFHSK0FS001 CONN SMD HOUSING 200P FS(P5.15,H8.65) Signal name Signal name PEG_RXN15 PEG_TXN15 PEG_RXP15 PEG_TXP15 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 203 PEG_TXN14 PEG_RXP14 PEG_TXP14 PEG_RXN13 PEG_TXN13 PEG_RXP13 PEG_TXP13 PEG_RXN12 PEG_TXN12 PEG_RXP12 PEG_TXP12 PEG_RXN11 PEG_TXN11 PEG_RXP11 PEG_TXP11 PEG_RXN10 PEG_TXN10 PEG_RXP10 PEG_TXP10 PEG_RXN9 PEG_TXN9 PEG_RXP9 PEG_TXP9 PEG_RXN8 PEG_TXN8 PEG_RXP8 PEG_TXP8 PEG_RXN7 PEG_TXN7 PEG_RXP7 PEG_TXP7 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 204 Pin Assignment PEG_RXN6 PEG_TXN6 PEG_RXP6 PEG_TXP6 PEG_RXN5 PEG_TXN5 PEG_RXP5 PEG_TXP5 PEG_RXN4 PEG_TXN4 PEG_RXP4 PEG_TXP4 PEG_RXN3 PEG_TXN3 PEG_RXP3 PEG_TXP3 PEG_RXN2 PEG_TXN2 PEG_RXP2 PEG_TXP2 PEG_RXN1 PEG_TXN1 PEG_RXP1 PEG_TXP1 PEG_RXN0 PEG_TXN0 PEG_RXP0 PEG_TXP0 CLK_MXM# EXT_CRT_DDCCLK Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 205 Pin Assignment CLK_MXM EXT_CRT_DDCDAT GFXRST# EXT_HDMI_DDCCLK SYSFANON# EXT_HDMI_DDCDATA I/O MAINON GFXPG EXT_LVDS_PNLCLK 3ND_MBDATA EXT_LVDS_PNLDAT 3ND_MBCLK EXT_LVDS_BLON O EXT_VGA_RED EXT_DISP_ON DVI_HPD EXT_VGA_GRN EXT_HSYNC EXT_VGA_BLU EXT_VSYNC EXT_LVDS_TXL#2 EXT_LVDS_TXL2 EXT_LVDS_TXL#1 EXT_LVDS_TXL1 EXT_LVDS_TXL#0 EXT_LVDS_TXL0 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 206 Pin Assignment EXT_LVDS_TXLCK# EXT_LVDS_TXLCK EXT_HDMICLK- EXT_HDMICLK+ EXT_HDMITX2N EXT_HDMITX2P EXT_HDMITX1N EXT_HDMITX1P EXT_HDMITX0N EXT_HDMITX0P VIN_VGA VIN_VGA Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 207 L1394_TPA0- O L1394_TPA0+ O CN33 External MIC jack connector P/N:DFTJ06FR102 CONN DIP PHONE JACK 6P 1R FR(H6.6)BLACK PIN No. Signal PIN No. Signal name name ADOGND MIC1-L1 MIC1-R1 Port_B# ADOGND ADOGND ADOGND Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 208 P/N:DFHS52FR010 CONN SMD HOUSING 52P 2R FR(P0.8,H5.6) UMA PIN No. Signal name PIN No. Signal name +1.5V LAD0_PCIE LAD1_PCIE CLK_PCIE_MINI2# LAD2_PCIE CLK_PCIE_MINI2 LAD3_PCIE LFRAME#_PCIE I PLTRST# PCIE_RXN3 PCIE_RXP3 +1.5V PCIE_TXN3 PCIE_TXP3 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 209 PCLK__debug PLTRST#_debug +1.5V LDRQ#1__debug SERIRQ_debug CN35 Internal MINI card slot P/N:DFHS52FR016 CONN DIP HOUSING 52P 2R FR(P0.8,H6.5) PIN No. Signal name PIN No. Signal name WLAN_WAKE# WCS_DATR WCS_CLKR +1.5V CLK_PCIE_MINI# CLK_PCIE_MINI Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 210 Pin Assignment RF_EN_WLAN PLTRST# PCIE_RXN6 +3V_S5 PCIE_RXP6 +1.5V WL_SMCLK PCIE_TXN6 WL_SMDATA PCIE_TXP6 USBP5-_C USBP5+_C WiMAX_LED#_B O CL_CLK1_WLAN PLTRST#_PCIE +1.5V CL_RST#1_WLAN CN36 ODD connector P/N: DFHS50FR034 CONN DIP HOUSING 50P 2R FR(P0.8,H3.45) Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 211 -IDERST PDD8 PDD7 PDD9 PDD6 PDD10 PDD5 PDD11 PDD4 PDD12 PDD3 PDD13 PDD2 PDD14 PDD1 PDD15 PDD0 PDDREQ PDIOR# PDIOW# PDIORDY PDDACK# IRQ14 PDA1 DIAG# PDA0 PDA2 PDCS1# PDCS3# ODD_LED# O Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 212 CONN SMD HEADER 42P 1R MS(P0.76,H5.6) PIN No. Signal name Signal name XD_CD# XD_R/B# XD_RE# XD_CE# XD_CLE XD_ALE XD_WE# SD_D3 VCC_XD XD_WPO# SD/MS_CLK_C SD_CMD MS_D3/XD_D0 MS_CD# MS_D2/XD_D1 VCC_XD MS_D0/XD_D2 MS_D3/XD_D0_C MS_D1/XD_D7 SD/MS_CLK MS_BS/XD_D3 MS_D2/XD_D1_C Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 213 MS_D1/XD_D7_C VCC_XD SD_CD# SM_WPI#/SD_WP CN38 HP/SPDIF jack connector P/N:DFTJ05FR015 CONN DIP PHONE JACK 5P 1R FR(H6.6)BLACK PIN No. Signal PIN No. Signal name name ADOGND HPR_SYS HPL_SYS ADOGND HP_JD +3V_SPD SPDIF_OUT Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 214 Appendix D Display Codes Display Codes Table D-1 Scan codes (set 1 and set 2) (1/4) Code set 1 Code set 2 Keytop Note Make Break Make Break ‘ ~ 7 & BkSp Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 215 Display codes Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 216 Table D-1 Scan codes (set 1 and set 2) (2/4) Code set 1 Code set 2 Keytop Note Make Break Make Break Caps Lock ‘ “ Enter Shift (L) No.102 , < . > Shift (R) Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 217 Table D-1 Scan codes (set 1 and set 2) (3/4) Code set 1 Code set 2 Keytop Note Make Break Make Break Ctrl Alt (L) Space ALT (R) ← Home ↑ ↓ PgUp PgDn → Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 218 5. * This key corresponds to key No. 42 in a 102-key model. 6. * Refer to Table D-6, No. 124 key scan code. 7. * Refer to Table D-7, No. 126 key scan code. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 219 With left Shift With right Shift Set 1 E0 AA __________ E0 B6 E0 2A ___________ E0 36 Set 2 E0 F0 12 ________ E0 F0 59 E0 12 ___________ E0 59 Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 220 E0 2F E0 F0 2F E0 F0 12 Table D-4 Scan codes with Fn key Code set 1 Code set 2 Keytop Make Break Make Break CTRL LALT ARROW NUMERIC Scrl Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 221 Make Break Make Break (–) Table D-6 No.124 key scan code Code set 1 Code set 2 Shift Make Break Make Break Prt Sc Common Ctrl + Shift + Alt + Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 222 Table D-7 No.126 key scan code Shift Code set 1 Code set 2 Make Make Pause Common* E1 1D E1 F0 Ctrl* E0 46 7E E0 F0 *: This key generates only make codes. Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
  • Page 223 Appendix E Keyboard Layout United Status (US) Keyboard Figure US keyboard (L300mm x W131.3mm) Traditional Chinese (CH) Keyboard Figure CH keyboard (L300mm x W131.3mm) Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08)
  • Page 224 3. Thai (TI) Keyboard Figure TI keyboard (L300mm x W131.3mm) 4. Korean (KO) Keyboard Figure KO keyboard (L300mm x W131.3mm) Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08)
  • Page 225 5. United Kingdom (UK) Keyboard Figure UK keyboard (L300mm x W131.3mm) 6. US International (UI) Keyboard Figure UI keyboard (L300mm x W131.3mm) Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08)
  • Page 226 7. Hebrew (HB) Keyboard Figure HB keyboard (L300mm x W131.3mm) 8. Danish (DM) Keyboard Figure DM keyboard (L300mm x W131.3mm) Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08)
  • Page 227 9. Swiss (SW) Keyboard Figure SW keyboard (L300mm x W131.3mm) 10. Arabic (ARE) Keyboard Figure ARE keyboard (L300mm x W131.3mm) Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08)
  • Page 228 11. Czech (CZ) Keyboard Figure CZ keyboard (L300mm x W131.3mm) 12. Russian (RU) Keyboard Figure RU keyboard (L300mm x W131.3mm) Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08)
  • Page 229 13. Portuguese (PO) Keyboard Figure PO keyboard (L300mm x W131.3mm) 14. Slovakian (SL) Keyboard Figure SL keyboard (L300mm x W131.3mm) Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08)
  • Page 230 15. Italian (IT) Keyboard Figure IT keyboard (L300mm x W131.3mm) 16. French (FR) Keyboard Figure FR keyboard (L300mm x W131.3mm) Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08)
  • Page 231 17. German (GR) Keyboard Figure GR keyboard (L300mm x W131.3mm) 18. Greek (GK) Keyboard Figure GK keyboard (L300mm x W131.3mm) Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08)
  • Page 232 19. Canada French (CF) Keyboard Figure CF keyboard (L300mm x W131.3mm) 20. Hungarian (HG) Keyboard Figure HG keyboard (L300mm x W131.3mm) Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08) E-10...
  • Page 233 21. Spanish (SP) Keyboard Figure SP keyboard (L300mm x W131.3mm) 22. Turkish (TR) Keyboard Figure TR keyboard (L300mm x W131.3mm) Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08) E-11...
  • Page 234 23. Turkish F (TF-F) Keyboard Figure TF-F keyboard (L300mm x W131.3mm) 24. Swedish (SD) Keyboard Figure SD keyboard (L300mm x W131.3mm) Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08) E-12...
  • Page 235 25. Belgian (BE) Keyboard Figure BE keyboard (L300mm x W131.3mm) 26. Yugoslavian (YU) Keyboard Figure YU keyboard (L300mm x W131.3mm) Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08) E-13...
  • Page 236 27. Norwegian (NW) Keyboard Figure NW keyboard (L300mm x W131.3mm) 28. Scandinavian (ND) Keyboard Figure ND keyboard (L300mm x W131.3mm) Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08) E-14...
  • Page 237 29. Canadian Multinational (AC) Keyboard Figure AC keyboard (L300mm x W131.3mm) 30. Canadian Bilingual (CB) Keyboard Figure CB keyboard (L300mm x W131.3mm) Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08) E-15...
  • Page 238 31. Japanese (JP) Keyboard Figure JP keyboard (L300mm x W131.3mm) Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08) E-16...

  • Page 239: Appendix F Wiring Diagrams

    (15) SDL (15) Figure F-1 RGB Monitor ID Wraparound connector (15PIN to 15PIN) LAN Loopback Connector (3) BIDBP (RX+) (1) BIBAP ‘(TX+) (4) BIDBN (RX-) (2) BIDAN (TX-) Figure F-2 LAN loopback connector Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q0...
  • Page 240 BIOS have been erased or system can not boot . In this case, insert the BIOS rewriting disk, and the BIOS will be rewritten. Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08)
  • Page 241 Appendix H Appendix H EC/KBC Rewrite Procedures Same as BIOS rewrite Procedures, please refer appendix G Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08)
  • Page 242 Appendix I Reliability Appendix I Reliability The following table shows MTBF (Mean Time Between Failures) in maximum configuration. Table I-1 MTBF Component Time (hours) System 4138.00 Satellite M300 and Satellite Pro M300 Maintenance Manual(960-Q08)

This manual is also suitable for:

Satellite pro m300

Table of Contents