Offset Settings - Fujitsu fi-6000NS Operator's Manual

Juniper networks network scanner operator's guide

Hide thumbs Also See for fi-6000NS:

Table of Contents

■ Offset Settings

If the scanned output is found to be displaced relative to the actual documents being scanned, the

scan offsets can be adjusted.

1. On the "Scanner Adjustment" screen, under [Front Side Offsets]/[Reverse Side

Offsets], enter values for the "Horizontal Offset" and "Vertical Offset" input fields.

Offset lengths are measured in units of 0.5mm and may be set to between -4 and +4.

2. Press the [OK] button.

The offset settings are set.

3.5 Using the System Settings Menus

Network Scanner fi-6000NS Operator's Guide