Battery Pack - Toshiba TECRA A8 User Manual
Portable personal computer
Hide thumbs
Also See for TECRA A8:
- Maintenance manual (428 pages) ,
- User manual (306 pages) ,
- User manual (220 pages)
Table of Contents
Advertisement
3. Turn the computer upside down and remove the battery pack. Refer to
Replacing the battery pack
Modes, for details.
4. Loosen the screw securing the memory module cover. The screw is
attached to the cover to prevent it from being lost.
5. Insert your fingernail or a thin and flat object into the slit and lift it off.
6. Push the latches to the outside to release the module. A spring will
force one end of the module up.
7. Grasp the module by the sides and pull it out.
■
If you use the computer for a long time, the memory modules and the
circuits located close to the memory modules will become hot. In this
case, let them cool to room temperature before you replace them.
■
Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access
problems.
8. Seat the memory module cover and secure it with one screw.
Be sure that the cover is closed firmly.
9. Install the battery pack. Refer to
Chapter 6, Power and Power-Up Modes, for details.
10. Turn your computer over.
Battery pack
You can increase the portability of the computer with additional battery
packs. If you're away from an AC power source and your battery runs low,
you can replace it with a freshly charged battery. Refer to Chapter 6,
and Power-Up
User's Manual
section in Chapter 6, Power and Power-Up
Figure 8-8 Removing the memory module
Modes.
Latches
Replacing the battery pack
Optional Devices
section in
Power
8-9
Advertisement
Table of Contents
