Table of Contents
Advertisement
Chapter 2
Choosing an Integration Mode
Connecting to Cisco CallManager
Resulting Line Configuration
78-11069-03
Figure 2-3
Logical Connections of Simple Integration on the DPA 7610
Use the Ethernet port on the DPA 7630/7610 to connect to the IP network, over
which the DPA 7630/7610 uses SCCP to communicate with Cisco CallManager.
This configuration results in 24 lines available for the following purposes:
•
Incoming and outgoing calls between the Cisco CallManager system and the
Octel system via the DPA 7630/7610.
•
Message waiting indicator (MWI) commands going from the Octel system to
Cisco CallManager via the DPA 7630/7610.
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
Using the Simple Integration Mode
Octel
Ports 24-1
DPA 7610
All 24 ports connected to Octel.
Configure some lines to handle
incoming calls, some for outgoing
calls, and some for MWI.
Do not enable incoming and
outgoing calls on the same line.
2-5
Advertisement
Chapters
Table of Contents
Troubleshooting
