Table of Contents
Advertisement
1-1. Operating Environment
. Install the unit in a well ventilated place to prevent a
temperature rise in the unit. Never cover the ventilation
holes of the outer frame.
. Never install the unit near a heat source because the
environmental temperature during operation should be
5 dC to 40 dC.
1-2. Power Supply
1-2-1. Power Switch for Service
(Control panel)
w
The power switches for service of the control panels are
placed only in the unit.
When installing the unit, incorporate a readily accessible
disconnect device in the fixed wiring, so that the operator/
engineer power in case a fault should occur.
1-2-2. Power Specifications
Power requirements
Current consumption
DVS-7000A
BKDS- 7011/7012
7021/7022/7023
7011R
7021R/7022R/7023R
7011LR
7021LR/7022LR/7023LR
m
As the inrush current at turn-on is the maximum 35 A, the
capacity of the AC power must be commensurate in it with
the inrush current of the maximum 35 A for the processor
and the control panel respectively. If the capacity of the
AC power is not the adequately large, the breaker of the
AC power at the supply side will operate or the unit will
abnormal operate.
DVS-7000AE IM
Section 1
Installation
: 100 to 240 V AC ± 10%
50/60 Hz
: 7 to 3.5 A
: 1.0 A (max.)
1-2-3. Power Cord
w
The power cords are not supplied with DVS-7000A, the
control panels. Be sure to use the power cords that are
applicable to the places in the world.
n
The plug holder is not used for the control panels.
For the customer in the U.S.A. and Canada
Required Parts
1 Power Cord, 125 V 10 A (2.4 m) : 1-557-377-11
2 Plug Holder B (Black)
1
For the customer in the United Kingdom
Required Parts
DK-2401 (EK)
1 Power Cord, 250 V 10 A (2.4 m)
2 Plug Holder B (Black) : 2-990-242-01
1
For the customer in the all European countries
except the United Kingdom
Required Parts
DK-2401 (AE)
1 Power Cord, 250 V 10 A (2.4 m)
2 Plug Holder B (Black) : 2-990-242-01
1
n
For the customer outside of the area as shown above,
please consult with local Sony's sale/service office.
: 2-990-242-01
AC inlet
2
AC inlet
2
AC inlet
2
1-1
Advertisement
Table of Contents
