Table of Contents
Advertisement
Command Line Reference
AP Authentication Commands
9-86
AP Authentication Commands
The command described in this section is used to enable and configure AP
Authentication in the Access Point 530.
Command
[no] ap-authentication
show ap-authentication
ap-authentication
This command enables and configures AP Authentication on the device. The
no version of the command disables AP Authentication for the device.
Syntax
[no] ap-authentication <username> <password>
username - Specifies the "user" name of the access point.
•
password - Specifies the password for the access point "user".
•
[no] ap-authentication eap-type <eap-type>
eap-type - Specifies the EAP authentication type for the access point
•
"user" (either MD5 or PEAP).
Default
Disabled
Command Mode
Global Configuration
Example
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# ap-authentication AP2167
21B83j0k
ProCurve Access Point 530(config)# ap-authentication eap-
type peap
ProCurve Access Point 530(config)#
Function
Enables and disables AP authentication on the
access point.
Displays the current AP Authentication settings.
Mode
Page
GC
9-86
GC
9-87
- Quick Links:
- Getting Started
- Ip Addressing
Hide quick links:
Advertisement
Chapters
Table of Contents
