Connection; Connecting The Main Unit To The Router - JVC DD-3 Instructions Manual
Network media system
Hide thumbs
Also See for DD-3:
- Instructions manual (60 pages) ,
- Network manual (22 pages) ,
- Instructions manual (60 pages)
Table of Contents
Advertisement
Connection
This part explains the procedure for connecting the
main unit to the computer via a router with an
Ethernet cable and confirming that the connection
is completed properly.
NOTE
• Before following this procedure, connect the
main unit, speakers and a TV referring to the
main volume of the operation manual for this
system.
• To connect the main unit to the computer
directly, refer to "Connecting the main unit to the
computer directly" on page 19.
Connecting the main unit to
the router
This part explains the procedure for connecting the
main unit to the computer linked to the Internet via
a router.
Internet
Modem
Router
Computer
• The diagram shown above has been simplified
by omitting the connection of the main unit,
speakers and a TV. Refer to the main volume of
the operation manual for connecting the devices
shown above.
• The diagrams of the Internet and modem are
omitted in the later explanations.
1
Connect one end of the Ethernet
cable (straight-through cable, not
supplied) to the LAN terminal on
the router.
2
To the LAN
terminal on the
router
Ethernet cable
(straight-
through cable,
not supplied)
Connect the other end of the
Ethernet cable to the LAN terminal
on the main unit.
6
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
