Connecting The Speakers - JVC DD-3 Instructions Manual
Network media system
Hide thumbs
Also See for DD-3:
- Instructions manual (60 pages) ,
- Network manual (22 pages) ,
- Instructions manual (64 pages)
Table of Contents
Advertisement
Connecting the speakers
Assembling the speaker stands (DD-8)
The speakers for DD-8 must be assembled to the speaker stands before the speakers can be connected to
the subwoofer. Follow the diagrams below.
Left and right speakers
■ CAUTION
• The left and right speakers for DD-8 are consid-
erably heavy. Care must be taken in carrying and
handling them. Injury to personnel or damage to
devices may result if the left/right speaker falls.
Speaker body
Mount the speaker body perpendicular to the
speaker stand. Use the supplied M4 x 25-mm screws
(3) to fasten each speaker to its speaker stand.
Black
Black line
Left/right speaker cable (supplied)
Remove the screw and the terminal cover. After
connecting the speaker cables, reattach the termi-
nal cover to the speaker body and tighten the screw.
Center surround speaker
Speaker stand
■ CAUTION
• The center surround speaker for DD-8 can be
• Be sure to have the speaker installed on the wall
• DO NOT install the speaker on the wall by your-
• Care must be taken in selecting a location for
Red
installed on a wall.
by qualified personnel.
self to avoid unexpected damage from it falling
off the wall due to incorrect installation or weak-
ness in wall structure.
speaker installation on a wall. Injury to personnel
or damage to devices may result if the installed
speaker interferes with daily activities.
Use the supplied
M5 x 14-mm screws
(2) to fasten the
speaker stand.
6
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
