Table of Contents
Advertisement
Service Processor Firmware Updates
Attention:
processor menus; the system firmware cannot be updated from the service processor
menus. A service processor firmware update always requires a companion system
firmware update, which must be applied first. For this reason, updating only the service
processor firmware using the service processor menus is not recommended. See the
Web site at http://www.rs6000.ibm.com/support/micro to download the latest firmware
levels and update instructions.
The service processor firmware update image must be written onto a DOS-formatted
diskette. The update image can be obtained from the following Web site:
http://www.rs6000.ibm.com/support/micro.
After the update diskette has been made, from the service processor main menu, select
Service Processor Setup. Then select Reprogram Service Processor Flash
EPROM. The program requests the update diskette(s) as they are needed. The service
processor will automatically reboot after the firmware update is complete.
Service Processor Error Log
The service processor error log contains information about errors reported by the
service processor.
19991118165344 1. 4B276851 CPU BIST fail detected
FRUs to replace: P1-C1
Press "C" to clear error log, any other key to continue. >
The time stamp in this error log is coordinated universal time (UTC), also known as
Greenwich mean time (GMT). AIX error logs have more information available and are
able to time stamp with local time.
Only the service processor firmware can be updated from the service
Error Log
Chapter 7. Using the Service Processor
207
Advertisement
Table of Contents
