Table of Contents
Advertisement
Console Mirroring
Console mirroring allows a user on a local ASCII terminal to monitor the service
processor activities of a remote user. Console mirroring ends when the service
processor releases control of the serial ports to the system firmware.
System Configuration for Console Mirroring
The following describes the system configuration for console mirroring:
v Modem connected to one serial port and enabled for incoming calls
v Local ASCII terminal connected to the other serial port. This local terminal can be
connected directly to your server or connected through another modem.
Remote console mirroring can be invoked in two ways:
v Remote session first, then local session added:
1. Remote session already in progress.
2. Remote user uses the service processor menus to enable console mirroring,
v Local session first, then remote session added:
1. Local session is already in progress.
2. The service processor receives a call from the remote user.
3. The local user selects the option to enable console mirroring. The service
Note: To disconnect quickly, press Ctrl+D on either console, and both sessions will exit
206
Service Guide
allowing both consoles to be active.
processor immediately begins mirroring service processor menus.
the service processor menus.
Advertisement
Table of Contents
