Table of Contents
Advertisement
Select Boot Devices
1 Display Current Settings
2 Restore Default Settings
3 Configure 1st Boot Device
4 Configure 2nd Boot Device
5 Configure 3rd Boot Device
6 Configure 4th Boot Device
7 Configure 5th Boot Device
--------------------------------------------------------------------------------------------------
Navigator keys:
M = return to main menu
ESC key = return to previous screen
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigator key: _
Display Current Settings: Lists the current order of devices in the boot list. The
following screen shows an example of this display.
Current Boot Device
1. SCSI 9100 MB Harddisk (loc = P1-I6/Z1-A8
2. SCSI CD-ROM (loc = P1/Z1-A1)
3. SCSI Tape (loc = P1/Z1-A0)
4. Ethernet (loc = P1-I5/E10)
5. None
--------------------------------------------------------------------------------------------------
Navigator keys:
M = return to main menu
ESC key = return to previous screen
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigator key: _
Restore Default Settings: Restores the boot list to the default device of:
1. Primary diskette drive
2. CD-ROM drive
3. Tape drive (if installed)
4. Hard disk drive
5. Network adapter
Attention: To change the custom boot list back to the default values, select the
Default. If you change your startup sequence, you must be extremely careful when
performing write operations (for example, copying, saving, or formatting). You can
accidentally overwrite data or programs if you select the wrong drive.
Configure Nth Boot Device
In the description below, Nth can be 1st, 2nd, 3rd, and so on, depending on your
choice on the previous menu.
X = eXit System Management Services
X = eXit System Management Services
Chapter 8. Using System Management Services
243
Advertisement
Table of Contents
