Blink Error Code (All Models) - Panasonic TC-P42X1 Revised Troubleshooting Handbook
Plasma hd and fhd tv
Hide thumbs
Also See for TC-P42X1:
- Operating instructions manual (172 pages) ,
- Service manual (108 pages) ,
- Technical manual (77 pages)
Table of Contents
Advertisement
If the power LED continues to blink even after the TV is unplugged, press and hold the power
switch on the TV for a few seconds until the LED turns off.
Trouble Mode
Communication Error
Make sure that connectors P25 and D25 are properly seated
Replace the P
board
1 Blink Error Code
Defective Board
A, P, Loose connections
No
Unplug in the TV
Is there
continuity between
No
pin 9 of connector
P25 and pin 5 of
connector P7 on
the P board?
Warning: Disconnect AC Power prior to
making any disconnection or connection.
Start Here
Plug in the TV
Is there 5V at
Yes
pin 9 of
connector
P25/A25?
Yes
Reseat P25/A25 or
Replace the cable
Replace the A
board
Slide #32
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
