Blinks Error Code (All Models) - Panasonic TC-P42X1 Revised Troubleshooting Handbook
Plasma hd and fhd tv
Hide thumbs
Also See for TC-P42X1:
- Operating instructions manual (172 pages) ,
- Service manual (108 pages) ,
- Technical manual (77 pages)
Table of Contents
Advertisement
2 Blinks Error Code (All Models)
If the power LED continues to blink even after the TV is unplugged, press and hold the power
switch on the TV for a few seconds until the LED turns off.
Unplug the TV and check the resistance between pin 1 of connector P6 and ground (Chassis)
Plug in the TV and turn it on. Measure
the voltage at pin 1 of connector P6
Is there
No
15V
present?
Replace
The P board
Reconnect P25 and measure the
resistance between pin 1 of
connector P6 and ground (Chassis)
Is there a
No
short
circuit?
Replace
The A board
No
Yes
Replace
The A board
Disconnect SC20 on the SC board
Yes
and measure the resistance between
pin 1 of connector P6 and ground
(Chassis
Start Here
Is there a
Yes
Unplug connectors P6, P11, and P25 on the P
short
board. Measure the resistance between pin 1 of
circuit?
connector P6 and ground (Chassis)
Reconnect P11 and measure the
resistance between pin 1 of
connector P6 and ground (Chassis)
Yes
No
Is there a
short
circuit?
Replace
The SC board
Yes
No
Is there a
short
circuit?
Replace
The SS board
Yes
No
Is there a
short
circuit?
Replace
The A board
Replace
The P board
Slide #34
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
