SERVICE MANUAL AE- 4 CHASSIS MODEL MODEL COMMANDER DEST CHASSIS NO. COMMANDER DEST CHASSIS NO. KV-28WF3A KV-32WF3A RM-862 Italian SCC-K43L-A RM-862 Italian SCC-K43K-A KV-28WF3B KV-32WF3B RM-862 French SCC-K45N-A RM-862 French SCC-K45M-A KV-28WF3D KV-32WF3D RM-862 SCC-K41N-A RM-862 SCC-K41M-A KV-28WF3E KV-32WF3E RM-862 Spanish SCC-K42L-A RM-862...
Page 2
KV-28WF3/32WF3 ITEM MODEL Television System Stereo System Channel Coverage Color System ITALIA VHF : A-H2 (C) UHF : 21-69 PAL Italian B/G/H, D/K GERMAN Stereo B/G/H VHF : E2-E12 UHF : E21-E69 CABLE TV (1) : S1-S41 NTSC4.43, NTSC3.58 CABLE TV (2) : S01-S05, M1-M10, U1-U10 (VIDEO IN) L VHF : F02-F10 UHF : F21-F60 CABLE : B-Q B/G/H VHF : E2-E12...
Page 3
KV-28WF3/32WF3 Model Name KV-28WF3A KV-28WF3B KV-28WF3D KV-28WF3E KV-28WF3K KV-32WF3A KV-32WF3B KV-32WF3D KV-32WF3E KV-32WF3K Item Pal Comb RGB Priority Woofer Box Scart 1 Scart 2 Front in (3) Scart 4 Projector AKB in 16:9 mode Norm B/G/H Norm I Norm D/K Norm AUS Norm L Norm SAT...
Page 4
KV-28WF3/32WF3 Pin No Signal Signal level 21 pin connector (1 Audio output B Standard level : 0.5V rms (right) Output impedence : Less than 1kohm* Audio output B Standard level : 0.5V rms (right) Output impedence : More than 10kohm* Audio output A Standard level : 0.5V rms (left)
EXPLOSÈES ET LES LISTES DE PIECES SONT D’UNE IMPORTANCE CRITIQUE POUR LA SÈCURITÈ DU FONCTIONNEMENT, NE LES REMPLACER QUE PAR DES COMPSANTS SONY DONT LE NUMÈRO DE PIÈCE EST INDIQUÈ DANS LE PRÈSENT MANUEL OU DANS DES SUPPLÈMENTS PUBLIÈS PAR SONY.
SECTION 2 DISASSEMBLY 2-1. REAR COVER REMOVAL 2-2. CHASSIS ASSY REMOVAL 2 Rear Cover 1 7 Screws BTV 4x16 2-3. SERVICE POSITION 2-4. G BOARD REMOVAL To release, push the claws in the direction of the arrow as indicated.
2-5. A BOARD REMOVAL 2-6. PICTURE TUBE REMOVAL Release the clip indicated. 7 Two DGC holders 8 Degaussing coils 9 Spring Extension 2 Chassis assy 3 C board 4 VM Board 5 Neck assy 10 Four PT screws (M) • REMOVAL OF ANODE-CAP 1 Anode cap Note : Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT...
REMOVAL AND REPLACEMENT OF THE MAIN-BRACKET For safety reasons, on no account should the plates be removed BOTTOM PLATES. and not refitted after servicing. (1) REMOVING THE PLATES (2) REFITTING THE PLATES Because the plates differ in size it is important that the correct plates are refitted in their In the event of servicing being required to the solder side of the D Board printed original location.
KV-28WF3/32WF3 SECTION 3 SET-UP ADJUSTMENTS • When complete readjustment is necessary or a new Carry out the following adjustments in this order : picture tube is installed, carry out the following 3-1. Beam Landing adjustments. 3-2. Convergence • Unless there are specific instructions to the contrary, 3-3.
KV-28WF3/32WF3 GREEN BLUE H.STAT Fig. 3-4 V.STAT convergence Vertical Static Magnet control Disk magnets or rotatable disk magnets correct Purity control corrects C Board these areas (a-d) this area RV702 (H STAT) RV701 H STAT Convergence Screen (G2) • If the horizontal dots are unable to coincide with the variable range of the H.STAT convergence, adjust together with the V.STAT convergence while tracking.
Page 21
KV-28WF3/32WF3 By rotating the V.STAT magnet clockwise, the red, green and Layout of each control blue dots move in the direction indicated below. Purity magnet BMC (Hexaploe) magnet V STAT convergence magnet Y-splitting axis correction magnet By opening or closing the V.STAT magnet, the red, green and blue dots move in the direction indicated below.
KV-28WF3/32WF3 3-3. FOCUS Video Proc. TDA4780 Item No Adjustment item Data Amount Receive a television broadcast signal. Normalize the picture setting. Adjust the focus control located on the flyback transformer to obtain the best focus at the centre of the screen. Bring only the centre area of the screen into focus, the magenta-ring appears on the screen.
KV-28WF3/32WF3 SECTION 4 CIRCUIT ADJUSTMENTS 4-1. ELECTRICAL ADJUSTMENTS Service adjustments to this model can be performed Item No Adjustment item Data Amount using the supplied Remote Commander RM-862. HOW TO ENTER INTO SERVICE MODE Turn on the main power switch of the set while pressing PROG + (plus) and PROG - (minus) buttons on the front R GAIN panel.
Page 24
KV-28WF3/32WF3 SDA9361 (VIDEO PROC) Item No Adjustment item Data Amount Item No Adjustment item Data Amount V Size V Blk Time V Centre H Blk Time V Linearity Start V Scan S Correction H Blk Phase H Size V Scan width 0 Pin Amp V Scan width 1 Up Corner Correction...
Page 25
KV-28WF3/32WF3 TDA4780 (VIDEO PROC) Item No Adjustment item Data Amount R GAIN G GAIN B GAIN R LVL REF G LVL REF B LVL REF PEAK DRV LIMIT GAMMA SCP ON = 3LEV OFF = 2LEV DELAY DATA BUFF NTSC MATRIX HDTV FSBL AUTO CUT OFF...
Page 26
KV-28WF3/32WF3 DEFLECTION SYSTEM ADJUSTMENT V SIZE Enter into the service mode and select ‘Deflection cont’. The ‘Deflect cont. SDA9361’ adjustment menu will be displayed. V POS Select and adjust each item in order to get an optimum image. Item No Adjustment item Data Amount V LIN...
KV-28WF3/32WF3 4-2. VOLUME ELECTRICAL ADJUSTMENTS Sub Brightness Adjustment Enter into the service mode (Device Menu). Select ‘SUB ADJUST MENU’. Sub adjustment Sub Picture Sub Color Sub Brightness 4/3 Centre PAP H-Centre PAP HWE-Offset Adjust the value according to the following advice. Sub Colour Adjustment Input a PAL colour bar signal.
KV-28WF3/32WF3 4-2. TEST MODE 2: Is available by pressing ‘TEST’ button twice, OSD ‘TT’ appears. The functions described below are available by pressing the two numbers. To release the Test mode 2, press 0, 10, 20 ... twice or switch the TV set into Stand-by Mode. Pressing the two Local Control buttons ( + and - ) during Power ON will also switch into ‘TT’...
Page 29
KV-28WF3/32WF3 continued Default value for TDA 9170 Default value for SAA 7185 Default value for TDA 4780 Default value for TDA 9144 Default value for TDA 9143 Default value for SDA 9288 Text character set Russia / east Text character set Russia / west Tenth entry is deleted DOLBY mode normal No function...
SECTION 5 DIAGRAMS BLOCK DIAGRAM (1) BLOCK DIAGRAM (2) KV-28WF3B, IC303 KV-32WF3B ONLY KV-28WF3 AND AV INPUT/OUTPUT INTERFACE,COLOUR DECODER, DELAY KV-32WF3 ONLY IC1002 ROM IC1001 LINE SOUND PROCESSOR, DOLBY NOISE REDUCTION, TV SYSTEM (1/2) MICRO CONTROLLER MICRO CONTROLLER, MEGA TEXT FILTER CN101(2/2) Q103,104,106...
BLOCK DIAGRAM (3) BLOCK DIAGRAM (4) J1200 CN0743 H OUT DRIVE Q801 T801 T802 CN0745 H-PULSE CN0001 H DAMP IC801 D802,803 H DY DI-MOD PIN DRIVE FOR SERVICE V DY Q803 +135V CN0723 CN0703 S601 DISABLE DISABLE CN0772 D804 POWER IC260 T603 AUDIO SELECTOR...
5-5. IC BLOCK DIAGRAMS A Board IC303, TDA4665T-T D Board IC261 TDA2822M SIGNAL LINE SAMPLE CLAMPING MEMORY HOLD SIGNAL SAMPLE LINE CLAMPING MEMORY HOLD FREQUENCY SANDCASTLE DIVIDER PHASE DETECTOR BY 192 DETECTOR 6 MHz DIVIDER BY 2 C Board IC703,704,705 TDA6111Q/N4 D Board IC802 STV9379 MIRROR MIRROR...
KV-28WF3/32WF3 SECTION 6 EXPLODED VIEWS NOTE : • Items with no part number and no description are not • Items marked “ * “ are not stocked stocked because they are seldom required for routine since they are seldom required for service.
KV-28WF3/32WF3 6-2. PICTURE TUBE REF. NO. PART.NO DESCRIPTION REMARK REF. NO. PART.NO DESCRIPTION REMARK X-4200-344-1 BEZNET ASSY 52-61 4-203-722-11 BUTTON, POWER (KV-28WF3A/28WF3B/28WF3D/28WF3E/28WF3K) (KV-32WF3A/32WF3B/32WF3D/32WF3E/32WF3K) X-4200-343-1 BEZNET ASSY 4-202-964-01 SPRING (KV-32WF3A/32WF3B/32WF3D/32WF3E/32WF3K) (KV-28WF3A/28WF3B/28WF3D/28WF3E/28WF3K) 4-045-250-01 DAMPER 4-202-964-11 SPRING X-4200-369-1 DOOR, ASSY (KV-32WF3A/32WF3B/32WF3D/32WF3E/32WF3K) (KV-28WF3A/28WF3B/28WF3D/28WF3E/28WF3K) 3-703-035-11 SHAFT, LID 4-203-723-01 DOOR (KV-28WF3A/28WF3B/28WF3D/28WF3E/28WF3K) (KV-28WF3A/28WF3B/28WF3D/28WF3E/28WF3K)
Page 52
KV-28WF3/32WF3 The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. PART.NO DESCRIPTION REMARK REF. NO. PART.NO DESCRIPTION REMARK *4-203-128-11 SHEET BLOTTING 4-200-433-01 SPRING, EXTENSION 4-203-870-01 SUPPORTER, CRT (KV-32WF3A/32WF3B/32WF3D/32WF3E/32WF3K) (KV-28WF3A/28WF3B/28WF3D/28WF3E/28WF3K) *4-203-390-01 CUSHION, DGC 4-203-098-01 SUPPORTER, CRT £...
KV-28WF3/32WF3 SECTION 7 ELECTRICAL PARTS LIST • Items marked “ * “ are not stocked since they are seldom required for When indicating parts by reference number, routine service. Some delay should be please include the board name. anticipated when ordering these items. •...
Page 54
KV-28WF3/32WF3 The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. PART.NO DESCRIPTION REMARK REF. NO. PART.NO DESCRIPTION REMARK C1867 1-164-004-11 CERAMIC CHIP 0.1MF D415 8-719-914-43 DIODE DAN202K C1868 1-164-004-11 CERAMIC CHIP 0.1MF C1869 1-164-004-11 CERAMIC CHIP 0.1MF <...
Page 55
KV-28WF3/32WF3 The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. PART.NO DESCRIPTION REMARK REF. NO. PART.NO DESCRIPTION REMARK < TRANSISTOR > JR1910 1-216-295-91 SHORT JR1915 1-216-295-91 SHORT Q411 8-729-901-06 TRANSISTOR DTA144EK Q412 8-729-901-06 TRANSISTOR DTA144EKB R408...
Page 56
KV-28WF3/32WF3 The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. PART.NO DESCRIPTION REMARK REF. NO. PART.NO DESCRIPTION REMARK R1821 1-216-023-00 RES,CHIP 1/10W R1940 1-216-025-91 RES,CHIP 1/10W R1822 1-216-049-91 RES,CHIP 1/10W R1831 1-216-081-00 RES,CHIP...
Page 57
KV-28WF3/32WF3 The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. PART.NO DESCRIPTION REMARK REF. NO. PART.NO DESCRIPTION REMARK C144 1-163-227-11 CERAMIC CHIP 10PF 0.5PF 50V C305 1-164-004-11 CERAMIC CHIP 0.1MF (KV-28WF3B/32WF3B) C306 1-164-004-11 CERAMIC CHIP 0.1MF...
Page 58
KV-28WF3/32WF3 The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. PART.NO DESCRIPTION REMARK REF. NO. PART.NO DESCRIPTION REMARK C1038 1-163-243-11 CERAMIC CHIP 47PF < DIODE > C1039 1-164-004-11 CERAMIC CHIP 0.1MF C1040 1-164-222-11 CERAMIC CHIP 0.22MF D102...
Page 59
KV-28WF3/32WF3 The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. PART.NO DESCRIPTION REMARK REF. NO. PART.NO DESCRIPTION REMARK < IC > Q1302 8-729-216-22 TRANSISTOR 2SA1162-G Q1303 8-729-216-22 TRANSISTOR 2SA1162-G IC101 8-752-068-45 IC CXA1855Q Q1304...
Page 60
KV-28WF3/32WF3 The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. PART.NO DESCRIPTION REMARK REF. NO. PART.NO DESCRIPTION REMARK R130 1-216-039-00 RES,CHIP 1/10W R188 1-216-113-00 RES,CHIP 470K 5% 1/10W R131 1-216-039-00 RES,CHIP 1/10W R189...
Page 61
KV-28WF3/32WF3 The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. PART.NO DESCRIPTION REMARK REF. NO. PART.NO DESCRIPTION REMARK R1012 1-216-041-00 RES,CHIP 1/10W R2002 1-216-049-91 RES,CHIP 1/10W R1030 1-216-073-00 RES,CHIP 1/10W R2003 1-216-097-91 RES,CHIP...
Page 62
KV-28WF3/32WF3 The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. PART.NO DESCRIPTION REMARK REF. NO. PART.NO DESCRIPTION REMARK C617 1-136-559-11 MYLAR 0.0047MF 400V D625 8-719-911-19 DIODE 1SS119-25 C618 1-104-989-91 FILM 0.0022MF 200V D626...
Page 63
KV-28WF3/32WF3 The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. PART.NO DESCRIPTION REMARK REF. NO. PART.NO DESCRIPTION REMARK R610 1-249-419-11 CARBON 1.5K 5% 1/4W F *A-1638-092-A C BOARD COMPLETE R611 1-249-377-11 CARBON 0.47 5%...
Page 64
KV-28WF3/32WF3 The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. PART.NO DESCRIPTION REMARK REF. NO. PART.NO DESCRIPTION REMARK < CRT SOCKET > R741 1-202-884-11 SOLID 820K 20% 1/2W R743 1-202-884-11 SOLID 820K 20% 1/2W...
Page 65
KV-28WF3/32WF3 The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. PART.NO DESCRIPTION REMARK REF. NO. PART.NO DESCRIPTION REMARK C283 1-136-169-00 FILM 0.22MF C848 1-162-129-00 CERAMIC 150PF C286 1-126-968-11 ELECT 100MF (KV-32WF3A/32WF3B/32WF3D/32WF3E/32WF3K) C620...
Page 66
KV-28WF3/32WF3 The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. PART.NO DESCRIPTION REMARK REF. NO. PART.NO DESCRIPTION REMARK C1616 1-137-535-11 FILM 0.0018MF 630V D262 8-719-911-19 DIODE 1SS119-25 (KV-32WF3A/32WF3B/32WF3D/32WF3E/32WF3K) D264 8-719-911-19 DIODE 1SS119-25 C1619 1-110-175-81 MYLAR...
Page 67
KV-28WF3/32WF3 The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. PART.NO DESCRIPTION REMARK REF. NO. PART.NO DESCRIPTION REMARK < FERRITE BEAD > L1604 1-406-988-21 INDUCTOR (KV-28WF3A/28WF3B/28WF3D/28WF3E/28WF3K) FB201 1-535-303-00 LEAD, JUMPER (5.0MM) L1605 1-406-988-21 INDUCTOR FB202...
Page 68
KV-28WF3/32WF3 The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. PART.NO DESCRIPTION REMARK REF. NO. PART.NO DESCRIPTION REMARK R247 1-249-413-11 CARBON 1/4W R666 1-249-413-11 CARBON 1/4W R248 1-249-425-11 CARBON 4.7K 5% 1/4W R668...
Page 69
KV-28WF3/32WF3 The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. PART.NO DESCRIPTION REMARK REF. NO. PART.NO DESCRIPTION REMARK R860 1-247-843-11 CARBON 3.3K 5% 1/4W R1606 1-215-451-00 METAL 1/4W R861 1-249-417-11 CARBON 1/4W (KV-32WF3A/32WF3B/32WF3D/32WF3E/32WF3K)
Page 70
KV-28WF3/32WF3 The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. PART.NO DESCRIPTION REMARK REF. NO. PART.NO DESCRIPTION REMARK R1650 1-249-429-11 CARBON 1/4W C1704 1-161-830-00 CERAMIC 0.0047MF 500V (KV-28WF3A/28WF3B/28WF3D/28WF3E/28WF3K) C1706 1-107-638-11 ELECT 33MF 160V...
Page 71
KV-28WF3/32WF3 The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. PART.NO DESCRIPTION REMARK REF. NO. PART.NO DESCRIPTION REMARK < RESISTOR > R1701 1-216-025-00 RES,CHIP 1/10W R1702 1-249-413-11 CARBON 1/4W R1703 1-216-174-00 RES,CHIP 1/8W...
Page 72
KV-28WF3/32WF3 The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. PART.NO DESCRIPTION REMARK REF. NO. PART.NO DESCRIPTION REMARK MISCELLANEOUS 4-204-132-41 MANUAL, INSTRUCTION (KV-28WF3A/32WF3A) *************** (ITALIAN) 4-204-132-51 MANUAL, INSTRUCTION (KV-28WF3B/32WF3B) £...