hit counter script
Sony Trinitron HMD-A240R Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Monitor
  5. HMD-A240R
  6. Service manual

Sony Trinitron HMD-A240R Service Manual

Color monitor
Hide thumbs Also See for Trinitron HMD-A240R:
Table of Contents

Advertisement

Quick Links

HISTORY INFORMATION FOR THE FOLLOWING MANUAL:

SERVICE MANUAL

ORIGINAL MANUAL ISSUE DATE: 9/2002
ALL REVISIONS AND UPDATES TO THE ORIGINAL MANUAL ARE APPENDED TO THE END OF THE PDF FILE.
REVISION DATE
9/2002
9-978-992-01
REVISION TYPE
SUBJECT
No revisions or updates are applicable at this time.
HMD-A240R
US/Canada Model
17VC
Design and specifications are subject to change without notice.
TRINITRON

COLOR MONITOR

®
HMD-A240R
Chassis No: SCC-L38PA
CHASSIS

Advertisement

Table of Contents
loading

Related Manuals for Sony Trinitron HMD-A240R

Summary of Contents for Sony Trinitron HMD-A240R

  • Page 1: Service Manual

    HISTORY INFORMATION FOR THE FOLLOWING MANUAL: HMD-A240R SERVICE MANUAL HMD-A240R US/Canada Model Chassis No: SCC-L38PA 17VC CHASSIS ORIGINAL MANUAL ISSUE DATE: 9/2002 ALL REVISIONS AND UPDATES TO THE ORIGINAL MANUAL ARE APPENDED TO THE END OF THE PDF FILE. REVISION DATE REVISION TYPE SUBJECT 9/2002...
  • Page 2 Self Diagnosis Supported model HMD-A240R SERVICE MANUAL HMD-A240R Trinitron US/Canada Model Chassis No: SCC-L38PA 17VC CHASSIS SPECIFICATIONS Picture tube 0.24 mm aperture grill pitch (center) Power Consumption 100 W 17 inches measured diagonally 90-degree deflection Deflection frequency Horizontal: 30 to 70 kHz Vertical: 48 to 120 Hz Video image area (16"...

  • Page 3: Table Of Contents

    HMD-A240R TABLE OF CONTENTS POWER MANAGEMENT ........................4 SELF DIAGNOSIS FUNCTION ......................4 TIMING SPECIFICATION........................4 WARNINGS AND CAUTIONS ........................ 5 SAFETY CHECK-OUT ........................... 6 SECTION 1: DISASSEMBLY 1-1. Cabinet Removal ..........................7 1-2. Service Position..........................7 1-3. A & D Board Removal........................8 1-4.

  • Page 4: Power Management

    HMD-A240R POWER MANAGEMENT The power saving mode complies with the VESA Display Power Management Signaling standard. Each state of power management shall be activated by the host computer terminating the appropriate sync signals. Blanking the video must precede termination of the sync signals. The elapsed time counter shall also be controlled by the host computer.

  • Page 5: Warnings And Cautions

    Ne les remplacer que par des composants sony dont le numero de piece est indique dans le present manuel ou dans des supplements publies par sony. Les reglages de circuit dont l’importance est critique pour la securite du fonctionnement sont identifies dans le present manuel.

  • Page 6: Safety Check-Out

    HMD-A240R SAFETY CHECK-OUT Leakage Test After correcting the original service problem, perform the following The AC leakage from any exposed metal part to earth ground and from all safety checks before releasing the set to the customer: exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes).

  • Page 7: Section 1: Disassembly

    HMD-A240R SECTION 1: DISASSEMBLY 1-1. CABINET REMOVAL Remove (2) screws (+BVTP 4 x 16). Release side claw - Insert the tip of a flathead screwdriver approximately 0.25" to unlock the claw. Release top claw - Working from the same side as the claw in Step 2, insert the tip of a flathead screwdriver to unlock the top claw.

  • Page 8: A & D Board Removal

    HMD-A240R 1-3. A & D BOARD REMOVAL Remove (1) screw (+BVTP 3 x 8) from the cable holder at the rear of the chassis base to release the cable. Remove (2) screws (+BVTP 3 x 8) from the rear of the chassis base and remove.

  • Page 9: Picture Tube Removal

    HMD-A240R 1-4. PICTURE TUBE REMOVAL Place the unit face down on a cushion to avoid scratching. Remove the anode cap. Remove (4) screws (Screw (5) Tapping) from the CRT. Remove the picture tube shield. Remove the deflection yoke. Remove the neck assembly. Remove the A Board.

  • Page 10: Section 2: Safety Related Adjustments

    HMD-A240R SECTION 2: SAFETY RELATED ADJUSTMENTS When replacing parts shown in the table below, the following 2-2. HV PROTECTOR CIRCUIT CHECK operational checks must be performed as a safety precaution against X-ray emissions from the unit. Confirm that the voltage between cathode of D517 and GND is more than 27.0 VDC.

  • Page 11: Section 3: Adjustments

    HMD-A240R SECTION 3: ADJUSTMENTS Connect the communication cable of the connector located on the D Board on the monitor. Run the service software and then follow the instructions. 3-702-691-01 1-690-391-21 A-150-919-A Connector Attachment Interface Unit IBM at Computer To BUS CONNECTOR as a Jig D-Sub Mini Din...

  • Page 12: Vertical And Horizontal Position And Size Specification

    HMD-A240R TB Pin Movement 14. Adjust XCV with XCV VR. XCV Movement Adjust V.SIZE with "VSIZE". Change "CONV_SW" to "0" and "MCR2" to "153". 15. Adjust YCH with YCH VR. Display crosshatch pattern with red and blue lines and black field. YCH Movement Adjust H.STAT and V.STAT with 4 pole magnet.

  • Page 13: Focus Adjustment

    HMD-A240R 3-6. FOCUS ADJUSTMENT Convergence (High) Mode Adjust the H.STAT and V.STAT with "HSTAT-HI" and "VSTAT-HI". Adjust Focus (V) and Focus (H) for optimum focus. Horizontal Convergence YBH-T-HI CBH-T-HI CBH-T-R-HI MBH-T-L-HI MBH-T-R-HI APH-L-HI APH-R-HI Focus (V) HSTAT-HI MBH-B-L-HI MBH-B-R-HI CBH-B-L-HI CBH-B-R-HI Focus (H) YBH-B-HI...

  • Page 14: Section 4: Diagrams

    HMD-A240R SECTION 4: DIAGRAMS 4-1. CIRCUIT BOARDS LOCATION The components identified by shading and symbol are critical for safety. Replace only with part number specified. The symbol indicates a fast operating fuse and is displayed on the component side of the board. Replace only with fuse of the same rating as marked. Les composants identifies per un trame et une marque sont critiques pour la securite.

  • Page 15: Block Diagrams And Schematics

    HMD-A240R 4-3. BLOCK DIAGRAMS AND SCHEMATICS BLOCK DIAGRAM (1/2) TO D BOARD CN606 CN304 STBY +5V STBY +5V CN302 R-OUT R-OUT +12V +12V R-IN C SYNC BGND CRT DRIVE B-IN G-OUT G-IN SIGNAL IN BLUE IC002 G-OUT J001 GGND +80V +80V GREEN G-IN...
  • Page 16 HMD-A240R BLOCK DIAGRAM (2/2) CONV-CONTROL CN701 IC701 CY4- SCONV OUT V-STATICOUT CY4+ V.REF IC703 H-STATICOUT CY3- V-CONVOUT CY3+ V-SIN H-CONVOUT CY2- CN510 CY2+ VPOSIN DCONV OUT CY1- -33V IC702 HD.IN CY1+ T505 V.REF OUT TO A BOARD ROTATION- CN306 BUFFER ROTATION+ Q521 ROTATION...

  • Page 17: A Board Schematic Diagram

    HMD-A240R A BOARD SCHEMATIC DIAGRAM [VIDEO] COMPONENT SIDE D311 1PS226-115 PROT. FROM FBT C351 FB302 R030 FROM FBT :CHIP B:CHIP CN302 C003 — J001 D211 1000p R361 R330 CN306 500V 1PS226-115 SG003 B.GND PROT. :CHIP IC002 BLUE C251 C. SYNC LM2415T V901 G.GND...

  • Page 18: D Board Schematic Diagram

    HMD-A240R D BOARD SCHEMATIC DIAGRAM D BOARD WAVEFORMS STBY 5V STBY 5V IIC SCL IIC SCL IIC SDA IIC SDA FB902 JW(5) KEY SCAN STBY IC702 LED RED -15V IC703 STK391-120 LA6510 D CONV OUT LED GRN S CONV OUT IC904 C912 IC701...
  • Page 19 HMD-A240R D BOARD IC VOLTAGE LIST IC401 IC601 IC607 IC703 10.7 volt volt volt volt 77.4 -0.1 14.3 10.4 -13.3 -14.4 -75.7 IC608 volt -14.8 13.8 -65.7 12.1 -66.1 IC501 -75.1 volt -74.9 IC701 12.1 volt 14.7 IC901 IC904 volt volt IC602 volt...
  • Page 20 HMD-A240R D BOARD LOCATOR LIST DIODE DIODE COMP COND COMP COND COMP COND D401 D611 IC401 D402 D612 IC501 D403 D613 IC502 D404 D614 IC601 D501 D616 IC602 D502 D617 IC603 D503 D-10 D618 IC604 D504 D619 IC605 D505 D620 IC607 D506 D621...
  • Page 21 HMD-A240R [POWER, CONVERGENCE] COMPONENT SIDE � � � � � � � � � �� �� �� � � � � � � � � � — 21 —...
  • Page 22 HMD-A240R [POWER, CONVERGENCE] CONDUCTOR SIDE � � � � � � � � � �� �� �� � � � � � � � � � — 22 —...

  • Page 23: H Board Schematic Diagram

    HMD-A240R H BOARD SCHEMATIC DIAGRAM TO D BOARD CN904 CN801 STBY 5V D810 — D801 D803 SML76755WN C801 1SS119-25TD 1SS119-25TD LED RED LED GRN D802 D804 1SS119-25TD 1SS119-25TD — R801 2.7k R803 R805 R806 R802 R804 1.0k 1.5k 3.3k C802 0.001 —...

  • Page 24: J Board Schematic Diagram

    HMD-A240R J BOARD SCHEMATIC DIAGRAM TO D BOARD CN607 S1001 CN1001 — STBY STBY STBY MAIN MAIN — (POWER SWITCH) 9-978-992-01<17VC>JBOARD — — [Power Switch] — — — — — — 24 — —...

  • Page 25: Semiconductors

    HMD-A240R 4-4. SEMICONDUCTORS 2SC2610 2SC1623-L5L6 DTC143ESA 2SC4634LS-CB11 2SA1037AK-T146-R 2SC3941A-Q(TA) DTA114EKA-T146 HZU5.6B2TRF MTZJ-T-77-12B D1NS6 2SK2605LBSONY 2SA1175-HFE ERC81-004 D1NL40-TA2 2SK3155-01 2SC2785-HFE EGP10D UF4007G23 2SK2098-01MR-F119 DTC114TSA RGP10JPKG23 RGP02-20EL-6394 2SK2843LBS2SONY 2SC3311A-QRSTA RGP10DG23 ERB91-02 IRFU110A RL3Z-LF014-302 LETTER SIDE CATHODE CATHODE ANODE ANODE 1SS119-25 D4SB60L HSS83TD RD5.1ESB2 1SS355TE-17 RD5.6ESB2...

  • Page 26: Section 5: Exploded Views

    SPRING, COMPRESSION 4-045-123-31 HOLDER, DGC 4-086-076-01 BUTTON, POWER 1-419-092-21 COIL, DEGAUSSING 4-086-077-01 GUIDE, LED 4-080-810-21 BAND, DEGAUSS COIL 4-042-353-42 EMBLEM (NO. 7), SONY 4-088-880-21 CABINET 4-087-658-21 LABEL, INFORMATION 1-452-032-00 MAGNET,DISC 8-738-556-15 CRT 17TKB(SDS)(LIGHT GLASS) 4-040-897-01 SPACER, DY 1-452-923-41 NECK ASSEMBLY (NA-2915)

  • Page 27: Chassis

    HMD-A240R NOTE: The components identified by shading and mark are critical for safety. NOTE: Les composants identifies par un trame et une marque sont critiques pour Replace only with part number specified. la securite. Ne les remplacer que par une piece portant le numero specifie. 5-2.

  • Page 28: Packing Materials

    HMD-A240R NOTE: The components identified by shading and mark are critical for safety. NOTE: Les composants identifies par un trame et une marque sont critiques pour Replace only with part number specified. la securite. Ne les remplacer que par une piece portant le numero specifie. 5-3.

  • Page 29: Section 6: Electrical Parts List

    HMD-A240R The components in this manual identified by the following RESISTORS • All resistors are in ohms symbol: • F : nonflammable • All variable and adjustable resistors have characteristic curve B, unless otherwise noted. Items marked with an asterisk are not stocked since they are seldom required for routine service.
  • Page 30 HMD-A240R NOTE: Les composants identifies par un trame et une NOTE: The components identified by shading and marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only with remplacer que par une piece portant le numero specifie. part number specified.
  • Page 31 HMD-A240R NOTE: Les composants identifies par un trame et une NOTE: The components identified by shading and marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only with remplacer que par une piece portant le numero specifie. part number specified.
  • Page 32 HMD-A240R NOTE: Les composants identifies par un trame et une NOTE: The components identified by shading and marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only with remplacer que par une piece portant le numero specifie. part number specified.
  • Page 33 HMD-A240R NOTE: Les composants identifies par un trame et une NOTE: The components identified by shading and marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only with remplacer que par une piece portant le numero specifie. part number specified.
  • Page 34 HMD-A240R NOTE: Les composants identifies par un trame et une NOTE: The components identified by shading and marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only with remplacer que par une piece portant le numero specifie. part number specified.
  • Page 35 HMD-A240R NOTE: Les composants identifies par un trame et une NOTE: The components identified by shading and marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only with remplacer que par une piece portant le numero specifie. part number specified.
  • Page 36 HMD-A240R NOTE: Les composants identifies par un trame et une NOTE: The components identified by shading and marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only with remplacer que par une piece portant le numero specifie. part number specified.
  • Page 37 HMD-A240R A component identified by this NOTE: The components identified by shading mark are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES — 37 —...
  • Page 38 1/4W R803 1-249-414-11 CARBON 1/4W R804 1-243-762-91 CARBON 1/4W R805 1-249-419-11 CARBON 1.5K 1/4W R806 1-247-843-11 CARBON 3.3K 1/4W Sony Corporation English Sony Technology Center 2002IJ74WEB-1 Technical Services Printed in USA 9-978-992-01 Service Promotion Department © 2002.9 — 38 —...
  • Page 39 A BOARD SCHEMATIC DIAGRAM D311 1PS226-115 PROT. C351 FB302 R030 :CHIP B:CHIP CN302 — D211 R361 R330 1PS226-115 B.GND :CHIP PROT. BLUE C251 C. SYNC :VID G.GND B:CHIP GREEN C049 VCC B D111 R261 FB202 R230 R.GND 1PS226-115 B:CHIP C104 :CHIP PROT.
  • Page 40 HMD-A240R [VIDEO] COMPONENT SIDE FROM FBT FROM FBT C003 J001 1000p CN306 500V SG003 IC002 LM2415T V901 :VIDEO OUTPUT PICTURE TO D BOARD TUBE CN510 R311 CN301 SG001 FPRD 1.2KV C035 0.0047 R064 R048 L305 JW(15) 2.2M TO D BOARD SG101 +80V D304...
  • Page 41 IICSCL FB016 5.0 MM — R018 :CHIP R028 BPCLP 2.2k :CHIP R017 :CHIP CBLK FB017 5.0 MM VRTRC R006 :CHIP Q006 HRTRC 2SC2412K :BUFFER R052 :CHIP — A BOARD WAVEFORMS A BOARD IC VOLTAGE LIST IC00 IC00 79.4 IC00 IC00 volt volt volt...
  • Page 42 +80V IC001 C002 FB005 1000p 500V IC002 +180V IC003 C013 1000p 500V TO D BOARD IC004 CN606 TRANSISTOR COMP COND (VIDEO) Q006 [VIDEO] 9-978-992-01<17VC>A BOARD CONDUCTOR SIDE...
  • Page 43 D BOARD SCHEMATIC DIAGRAM IIC SCL IIC SCL IIC SDA IIC SDA KEY SCAN IC702 IC703 -15V STK391-120 LA6510 D CONV OUT S CONV OUT IC904 IC701 L901 R743 PST9143NL R741 CXA8070AP 0.82 0.82 RESET 5V-2 :FPRD :FPRD CONV. CONTROL STBY 5V TEST D935...
  • Page 44 HMD-A240R D BOARD WAVEFORMS STBY 5V STBY 5V FB902 JW(5) STBY LED RED LED GRN IC904 C912 R925 T9143NL 4.7k CN901 :CHIP RESET R926 4.43 Vp-p (H) 3.14 Vp-p (H) :CHIP :S-MICRO D905 1SS355TE-17 C910 R903 D GND :CHIP B:CHIP STBY 5V C929 D931...
  • Page 45 IC601 2SJ449 180V L503 — STBY OFF T504 TEA1504-N2 C518 D524 R621 C622 D506 H.REG D617 D502 177.7 SW REG D606 4300p D509 MAIN ON FMQ-G1FS HSS83 RGP10JPKG23 D3S4M 1800V :CHIP UF4007G23 100V CONTROL R581 C575 NNCD12A-T1 R602 C574 MAIN CNT C579 D516 4.7M...
  • Page 46 L507 100p C550 C576 Q503 CH:CHIP JW(5) C564 2SJ449 0.47 R583 CH:CHIP HV REG B:CHIP C526 2A-T1 53.2 2200p R584 500V R531 4.7k :CHIP R527 L501 D513 Q510 178.1 R541 C527 D1NL40 STP4NB80FP R568 0.01 L502 HV OUT 250V R520 53.2 FB502 178.1...
  • Page 47 4-086-970-13 (1) Trinitron Color â Computer Display Operating Instructions Mode d’emploi Manual de instrucciones HMD-A240R HMD-A440 © 2002 Sony Corporation...
  • Page 48 – Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this For questions regarding your product or for the Sony Customer equipment. Information Service Center nearest you call:...
  • Page 49 • Furthermore, “ ä ” and “ â ” are not mentioned in each case in this manual. Contacting Sony ......i...

  • Page 50: Adjustments

    Setup Adjustments Navigating the menu Connecting your monitor to your computer Press the center of the joystick to display the main menu. Main menu Video signal cable to HD15 of the of the monitor connecting computer Connecting to a Macintosh or compatible computer When connecting this monitor to a Macintosh computer, use the the horizontal...
  • Page 51 On-Screen menu adjustments Main menu icons and adjustment Sub menu icons and adjustment items items Horizontal position Horizontal size Adjusting the size or centering of Vertical position the picture Vertical size Enlarge/reduce Rotating the picture Expanding or contracting the picture sides Adjusting the shape of the picture Shifting the picture sides to the left or right Adjusting the picture width at the top of the screen...

  • Page 52: Technical Features

    Technical Features Troubleshooting x No picture Preset and user modes If the 1 (power) indicator is not lit • Check that the power cord is properly connected. When the monitor receives an input signal, it automatically matches the • Check that the 1 (power) switch is in the “on” position. signal to one of the factory preset modes stored in the monitor’s memory to The 1 (power) indicator is orange (see “Preset mode timing table”...
  • Page 53 x Color is not uniform On-screen messages • Degauss the monitor.* If you place equipment that generates a magnetic field, such as a speaker, near the monitor, or if you change INFORMATION the direction the monitor faces, color may lose uniformity. x White does not look white OUT OF SCAN RANGE •...

  • Page 54: Specifications

    1 (power) indicator and inform your authorized Operating temperature 10 ºC to 40 ºC Sony dealer of the monitor’s condition. Be sure to note the model Approx. 461 × 479 × 471 mm (w/h/d) Dimensions name and serial number of your monitor. Also note the make and ×...
  • Page 55 • Les symboles “ ä ” et “ â ” ne sont pas mentionnés systématiquement dans le Pour communiquer avec Sony ....i présent mode d’emploi.

  • Page 56: Navigation Dans Le Menu

    Configuration Réglages Navigation dans le menu Raccordez votre moniteur à votre ordinateur Appuyez au centre du joystick pour afficher le menu principal. Menu principal SORTIR TAILLE/CENTRE GEOMETRIE Câble de signal vidéo vers le HD15 de COULEUR du moniteur l’ordinateur raccordé CONVERGENCE LANGUAGE OPTION...
  • Page 57 Réglages du menu d’écran Icônes du menu principal et éléments Icônes du sous-menu et éléments de réglage de réglage Position horizontale Taille horizontale Réglage de la taille ou du centrage Position verticale de l’image Taille verticale Agrandissement/Réduction Rotation de l’image Étirement ou contraction des côtés de l’image Réglage de la forme de l’image Déplacement des bords de l’image vers la droite ou la gauche...
  • Page 58 Caractéristiques Dépannage techniques x Aucune image Si l’indicateur 1 (alimentation) est éteint • Assurez-vous que le cordon d’alimentation est raccordé correctement. Modes préréglés et personnalisés • Vérifiez que l’interrupteur 1 (alimentation) est en position activée (on). L’indicateur 1 (alimentation) est allumé en orange Lorsque le moniteur reçoit un signal d’entrée, il compare automatiquement le •...
  • Page 59 x Les couleurs ne sont pas uniformes Messages à l’écran • Démagnétisez le moniteur.* Si vous placez à côté du moniteur un appareil qui génère un champ magnétique, comme un haut-parleur, ou si INFORMATIONS vous changez l’orientation du moniteur, il est possible que les couleurs perdent leur uniformité.
  • Page 60 Environ 130 W secondes entre les clignotements oranges de l’indicateur Température d’utilisation 1 (alimentation) et informez votre revendeur Sony agréé de l’état du 10 ºC à 40 ºC moniteur. Notez soigneusement le modèle et le numéro de série du Environ 461 × 479 × 471 mm (l/h/p) Dimensions moniteur.
  • Page 61 • Además, “ ä ” y “ â ” no se mencionan en cada caso en este manual. Póngase en contacto con Sony ....i Precauciones Advertencia sobre las conexiones de la alimentación...

  • Page 62: Ajuste Del Brillo Y El Contraste

    Configuración Ajustes Navegación por el menú Conexión del monitor a la computadora Oprima el centro del botón de control para mostrar el menú principal. Menú principal SALIR Cable de señal de a HD15 de la computadora TAMANÕ/CENTRO vídeo del monitor GEOMETRIA conectado COLOR...
  • Page 63 Ajustes de menús en pantalla Iconos del menú principal y Iconos del submenú y elementos de ajuste elementos de ajuste Posición horizontal Tamaño horizontal Ajuste del tamaño o centrado de la Posición vertical imagen Tamaño vertical Aumentar/reducir Giro de la imagen Expansión o contracción de los lados de la imagen Ajuste de la forma de la imagen Desplazamiento de los lados de la imagen a la izquierda o la derecha...

  • Page 64: Modos Predefinidos Y De Usuario

    Características técnicas Solución de problemas x No aparece la imagen Modos predefinidos y de usuario Si el indicador 1 (alimentación) no se ilumina • Compruebe que el cable de alimentación está correctamente conectado. Cuando el monitor recibe una señal de entrada, hace coincidir automáticamente •...

  • Page 65: Mensajes En Pantalla

    x El color no es uniforme Mensajes en pantalla • Desmagnetice el monitor.* Si coloca equipos que generen campos magnéticos, como altavoces, cerca del monitor, o si cambia la INFORMACION orientación de éste, el color puede perder uniformidad. FUERA DEL RANGO DE x El blanco no parece blanco AJUSTE •...
  • Page 66 Aprox. 365 × 274 mm (an/al) Si las barras de color no aparecen, significa que existe una posibilidad × 10 pulgadas) de falla del monitor. Informe a un proveedor Sony autorizado sobre el Imagen visible Aprox. 456 mm (18 pulgadas) estado del monitor.

  • Page 67: Appendix

    832 × 624 49.7 kHz 75 Hz Macintosh 16" URL: www.sony.ca/sonyca/customersupport_contactus.shtml email: it_help@sony.ca Color Address: Sony of Canada Ltd., attn. CIC 1024 × 768 60.0 kHz 75 Hz VESA 115 Gordon Baker Road 1024 × 768 Tronto, ON M2H 3R6 68.7 kHz...
  • Page 70 Sony Corporation Printed in U.S.A.

  • Page 71: Schematic Diagrams

    PRINTING THE SERVICE MANUAL The PDF of this service manual is not designed to be printed from cover to cover. The pages vary in size, and must therefore be printed in sections based on page dimensions. NON-SCHEMATIC PAGES Data that does NOT INCLUDE schematic diagrams are formatted to 8.5 x 11 inches and can be printed on standard letter-size and/or A4-sized paper. SCHEMATIC DIAGRAMS The schematic diagram pages are provided in two ways, full size and tiled.
  • Page 72 ON-SCREEN SEARCH OPTION All of the text within the service manual PDF is content searchable. This means that you can enter any text, word, phrase or reference number that appears in the manual, and the PDF software will search, fi nd and move the cursor to the location where you requested text fi rst appears. This feature can be particularly useful in locating components on a specifi...

Table of Contents