KDC-1028/128/128CR KDC-129/129S/229 BLOCK DIAGRAM ELECTRIC UNIT (X34-) L506 FM AGC AM+B Q501 Q351,352 AM AGC PRE MUTE PRE OUT IC10 FM (J/K Type) : 1800mV FM (E Type) 1372mV AM (J/K Type) 600mV MPX OUT SERVO AM (E Type) 855mV...
KDC-1028/128/128CR KDC-129/129S/229 COMPONENTS DESCRIPTION ELECTRIC UNIT (X34-3xxx-xx) Ref. No. Application / Function Operation / Condition SYSTEM µ-COM System control. POWER SUPPLY DC5Vx2, 7.9Vx1, 8.1Vx1, 10.3V, P.CON, P-ANT output. POWER IC Audio signal amplifier. MUTE LOGIC Mute control. RDS DECODER For other models.
KDC-1028/128/128CR KDC-129/129S/229 COMPONENTS DESCRIPTION SWITCH UNIT (X16-2940-xx) Ref. No. Application / Function Operation / Condition VFD DRIVER REMOTE SENSOR GREEN LED SW “ON” when the base goes “H”. RED LED SW “ON” when the base goes “H”. PAN SW5V “ON” when the base goes “H”.
Page 5
KDC-1028/128/128CR KDC-129/129S/229 MICROCOMPUTER’S TERMINAL DESCRIPTION Active Pin No. Pin Name Application Processing Operation (H/L) AUD SCL Volume + tuner I2C clock input and output PWIC STBY Power IC standby output Power IC ON : H, Power IC OFF : L...
Page 6
TYPE 2 General models commercially-designated as pure KENWOOD brand (Initial value) Initial value setting General models commercially-designated as pure KENWOOD brand (CRSC is changed) Multi-Path Band-Path Gain=12dB, Multi-Path Charge Current=0.4µA, De-Emphasis=75µS • POWER SUPPLY IC (IC3) CONTROL • CD MECHA CONTROL OPERATION SEL1 (Pin No.
KDC-1028/128/128CR KDC-129/129S/229 TEST MODE How to enter the test mode PRESET • When pressed for less than 1 second : CD EJECT While simultaneously press PRESET “1” key and PRESET “3” “5” key number display key, press “RESET” button. (Display) : _ _ _ X xxxx...
Page 10
KDC-1028/128/128CR KDC-129/129S/229 SPECIAL MODE ADJUSTMENT After replacing the following parts, adjust as follows. DC offset error detection confirmation mode Confirmation mode : While depressing PRESET “3” key and PRESET “6” key REPLACED PARTS ADJUSTMENT ITEMS simultaneously, press on the “RESET” button.
Page 11
KDC-1028/128/128CR KDC-129/129S/229 PC BOARD (COMPONENT SIDE VIEW) (FOIL SIDE VIEW) SWITCH UNIT X16-2940-xx (J76-0055-02) SWITCH UNIT X16-2940-xx (J76-0055-02) PAN-SW5V FL-SW9.8V LED+B PAN5V FL+B X16-2940-xx X16-2940-xx DATAS Ref. No. Address Ref. No. Address REMO RTRY-CCW TDF-DET ESD-GND Refer to the schematic dia- gram for the values of resis- tors and capacitors.
Page 12
KDC-1028/128/128CR KDC-129/129S/229 PC BOARD (FOIL SIDE VIEW) ELECTRIC UNIT X34-3xxx-xx (J76-0048-12) DAUGHTER UNIT X89-2690-10 (J76-0057-02) J1/L51 W351 W352 W423 R230 R229 R226 R225 W101 W398 W405 W406 W346 R222 R221 R273 R252 R257 R251 R271 Q252 W333 W340 W318 L101...
KDC-1028/128/128CR KDC-129/129S/229 PC BOARD (COMPONENT SIDE VIEW) CD PLAYER UNIT X32-5750-00 (J76-0059-02) X32-5750-00 Ref. No. Address Refer to the schematic diagram for the values of resistors and capacitors.
Page 15
KDC-1028/128/128CR KDC-129/129S/229 PC BOARD (FOIL SIDE VIEW) CD PLAYER UNIT X32-5750-00 (J76-0059-02) SLED DRVMUTE SPDL LOE/LIM A.GND A.+8V C100 R100 /MRST /MSTOP SLED OUT /MUTEL /LOAD /MUTER SLED IN /EJECT BU.5V Vref 2 GCTL NRFDET RFENV TRCRS R8 R11 VDET...
Page 21
KDC-1028/128/128CR KDC-129/129S/229 CAUTION : For continued safety, re- ANODE CONNECTION place safety critical components only 2G 1GA,1GB NAME with manufacturer’s recommended parts — (refer to parts list). — Indicates safety critical components. — — To reduce the risk of electric shock, —...
Page 23
KDC-1028/128/128CR KDC-129/129S/229 CAUTION : For continued safety, replace safety critical compo- nents only with manufacturer’s IOP+ IOP- recommended parts (refer to R7 3.6K parts list). Indicates safety critical com- ponents. To reduce the risk of 3.3K electric shock, leakage-current or resistance measurements shall be carried out (exposed C45 0.1...
Page 24
KDC-1028/128/128CR KDC-129/129S/229 EXPLODED VIEW (CD MECHANISM) DPU1 DFPC1 (X32) φ : N09-4460-05 : N09-4472-15 M1.7x8.0 M1.7x2.5 : N09-6004-05 M2x2 : N09-6007-05 φ : N09-6051-05 2x5(BLK) : N19-2163-04 1.6 WASHER : N39-2020-46 M2x2 : N09-6108-05 M2x3.5 φ : N09-6155-05 Parts with the exploded numbers larger than 700 are not supplied.
KDC-1028/128/128CR KDC-129/129S/229 EXPLODED VIEW (UNIT) DME1 : N29-0205-04 : N80-2006-48 : N80-2008-43 : N83-3005-48 : N86-2610-48 : N80-3010-48 : N83-3005-48 : N83-3020-48 : N86-2606-48 (X34) (X89-) (X16-) (X34-) Depends on the model. Refer to the parts list. Parts with the exploded numbers larger than 700 are not supplied.
(Depth) ............155mm Weight ............... 1.40kg (3.1 lbs) Weight ............... 1.40kg (3.1 lbs) KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. KENWOOD CORPORATION 2967-3, Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan KENWOOD USA CORPORATION KENWOOD ELECTRONICS ITALIA S.p.A.