Advertisement
Quick Links
Location of controls and basic operations
Main unit
MENU
SRC (source)
Open the setup menu.
Press to turn on the power; select the
source (Radio/CD/USB/AUX).
Receptor for the remote commander
OFF
Disc slot
Press and hold for 1 second to turn off the
Display window
power.
Press and hold for more than 2 seconds to
(disc eject)
turn off the power and the display
(browse)
disappears.
Enter the Quick-BrowZer™ mode.
Front panel release button
(You can search for a track in a CD or USB
SEEK +/–
device easily by category.)
1
Press
/ (prev/next)
search categories.
/ (fast-reverse/fast-forward)
When the track list appears, press
Radio:
(back) repeatedly to display the desired
Tune in stations automatically (press); find a
search category.
station manually (press and hold).
2
Rotate the control dial to select the
CD/USB:
desired search category, then press it to
Skip a track (press); skip tracks continuously
confirm.
(press, then press again within about 2
3
Repeat step 2 to search the desired
seconds and hold); reverse/fast-forward a
track.
track (press and hold).
Playback starts.
Control dial
To exit the Quick-BrowZer mode, press
Rotate to adjust the volume.
(browse).
ENTER
Enter the selected item.
©2014 Sony Corporation
CDX-G1001U
(back)
Return to the previous display.
MODE
Press to select the radio band (FM1, FM2,
FM3, MW or LW).
AF (alternative frequencies)/TA (traffic
announcement)
Set AF and TA.
PTY (program type)
Press and hold to select PTY in RDS.
Number buttons (1 to 6)
Radio:
Receive stored stations (press); store
stations (press and hold).
CD/USB:
1/2: ALBUM / (during MP3/WMA
playback)
Skip an album (press); skip albums
continuously (press and hold).
(repeat)*
3:
2
4: SHUF (shuffle)
6: PAUSE
Pause playback. Press again to resume
playback.
DSPL (display)
Press to change display items.
(browse)*
1
to display the list of
SCRL (scroll)
Press and hold to scroll a display item.
AUX input jack
USB port
*
1
During USB playback, press
than 2 seconds to directly return to the beginning of
the category list.
*
This button has a tactile dot.
2
Warning if your car's ignition has no ACC
position
Be sure to set the AUTO OFF function. The
unit will shut off completely and
automatically in the set time after the unit is
turned off, which prevents battery drain. If
you do not set the AUTO OFF function, press
and hold OFF until the display disappears
each time you turn the ignition off.
(browse) for more
Playing back a USB device / Playing tracks in various modes /
Adjusting the sound characteristics / Adjusting setup items
SET UP
Detaching the front panel
Setting the clock
You can detach the front panel of this unit to
The clock uses a 24-hour digital indication.
prevent theft.
1
Press MENU, rotate the control dial to
1
Press and hold OFF .
select [GENERAL], then press it.
The unit is turned off.
2
Rotate the control dial to select [CLOCK-
2
Press the front panel release button ,
ADJ], then press it.
then remove the panel by pulling it
The hour indication flashes.
towards you.
3
Rotate the control dial to set the hour and
minute.
To move the digital indication, press SEEK
+/–.
4
After setting the minute, press MENU.
The setup is complete and the clock starts.
To display the clock
Press DSPL.
Caution alarm
Tip
If you turn the ignition switch to the OFF
You can set the clock automatically with the RDS
position without detaching the front panel, the
feature. For details, see "Adjusting setup items" on the
caution alarm will sound for a few seconds. The
reverse side of the sheet, and set to [CT-ON] (clock
alarm will only sound if the built-in amplifier is
time).
used.
RADIO
Attaching the front panel
Storing stations automatically
Engage part of the front panel with part of
the unit, as illustrated, and push the left side
Caution
into position until it clicks.
When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.
1
Press SRC repeatedly to select [TUNER].
To change the band, press MODE repeatedly.
2
Press MENU, rotate the control dial to
select [GENERAL], then press it.
3
Rotate the control dial to select [BTM], then
press it.
The unit stores stations in order of frequency
on the number buttons.
Advertisement
Related Manuals for Sony CDX-G1001U
Summary of Contents for Sony CDX-G1001U
- Page 1 This button has a tactile dot. seconds and hold); reverse/fast-forward a on the number buttons. track. track (press and hold). Playback starts. Control dial To exit the Quick-BrowZer mode, press Rotate to adjust the volume. (browse). ENTER Enter the selected item. ©2014 Sony Corporation...
- Page 2 Location of controls and basic operations / Detaching the front panel / Setting the clock / Storing stations automatically SET UP RADIO SET UP RADIO EQ3 SETTING AUX-A* (AUX audio) Playing back a USB device Playing tracks in various modes Adjusting the sound Adjusting setup items Sets [CUSTOM] of EQ3.