Page 1
CD RDS RECEIVER DEH-X6700BS DEH-X6700BT Owner’s Manual DEH-X6710BT DEH-X4700BT Important (Serial number) DEH-X3700S The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card.
Remote Control Display indication Indication Description VOLUME +/– Appears when a lower tier of the menu or folder exists. Appears when the automatic answering function is set (page 11). MUTE (Only for Bluetooth-compatible models.) Appears when the button is pressed. Appears when the local seek tuning function is set (page 15).
Preparing the remote control Setting the clock (CLOCK SET) Remove the insulation sheet before use. When you turn the ignition switch to ON after installation, [SET UP :YES] appears in the display. How to replace the battery Press the M.C. dial. The setup menu disappears after 30 seconds of no operation.
Menu Item Description buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the REAR-SP Select when there is a full-range speaker connected to the rear FUNCTION settings (page 15). speaker output leads. [FUL] Best stations memory (BSM) [SW]...
(Turning the M.C. dial twice also enters the alphabetical search mode.) Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device connected 3 Turn the M.C. dial to select a letter, then directly to the unit will protrude out from the unit, which could be dangerous.
While listening to a song, press and hold to enter the link play mode. Turn the M.C. dial to select the mode ([ARTIST], [ALBUM], [GENRE]), then press to (Only for DEH-X6700BS/X6700BT/X6710BT/X4700BT) confirm. The selected song/album will be played after the currently playing song.
[ON], [OFF] A.PAIRING Select [ON] to pair the unit and iPhone automatically when an Select [Pioneer BT Unit] shown in the device display. iPhone is connected to the unit via USB. (This function may not [ON], [OFF] Make sure the same 6-digit number appears on this unit and the device, then be available depending on the version of iOS you are using.)
Purpose Operation Menu Item Description Switch between the current caller Press the M.C. dial. PHONE BOOK*1 Display the contacts which have been transferred from your and a caller on hold phone. Set [VISIBLE] in the connection menu to [ON] to browse the contacts via this unit.
NOTE Basic operations PIONEER IS NOT LIABLE FOR ANY THIRD PARTY APPS OR CONTENT, INCLUDING WITHOUT LIMITATION You can make various adjustments in the FUNCTION settings THEIR ACCURACY OR COMPLETENESS. THE CONTENT AND FUNCTIONALITY OF SUCH APPS ARE THE SOLE RESPONSIBILITY OF THE APP PROVIDER.
Press SRC/OFF to select [PANDORA]. Launch the Pandora application on the mobile device and start playback. SiriusXM Satellite Radio Basic operations (Only for DEH-X6700BS/X3700S) You can make various adjustments in the FUNCTION settings Purpose Operation Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over...
Page 12
NOTE Press BAND/ to select a band from [SXM1], [SXM2] or [SXM3]. TuneScan is compatible with SXV200 or later tuner models. Not compatible with SXV100. Press to select a channel. TuneMix™ Pressing and holding either button will rapidly browse through the channels. Create a music channel that’s a blend of songs made up from the music channels stored Press and hold either button then release to tune automatically.
FUNCTION settings Purpose Operation The menu items vary according to the source. Selecting the channel or song playing Press the M.C. dial. is only available for DEH-X6700BS/X3700S. Switching to the next/previous song during Press Menu Item Description TuneScan Switching to the next/previous channel...
Menu Item Description Menu Item Description EQ SETTING PLAY [SUPER BASS], [POWERFUL], Select or customize the equalizer curve. Start playback. [NATURAL], [VOCAL], [CUSTOM1], [CUSTOM1] can be set separately for each source. STOP [CUSTOM2], [FLAT] However, each of the below combinations are set to the same setting automatically.
*3 Not available when [FUL] is selected in [REAR-SP] in the INITIAL settings ILLUMINATION settings *4 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings *5 Not available when [OFF] is selected in [SUB.W]. Menu Item Description SYSTEM settings COLOR (Not available for DEH-X4700BT)
Menu Item Description Menu Item Description [LOW PASS] The mix pattern changes according to the bass ILLUMI FX (Not available for DEH-X4700BT) level. [ON], [OFF] The illumination effect can be seen when; [RANDOM] The mix pattern changes randomly according – there is an incoming call to the sound level mode and low pass mode.
• Consult your dealer if installation requires Secure the mounting sleeve by using a DEH-X6700BS drilling of holes or other modifications to screwdriver to bend the metal tabs To power cord input the vehicle.
Dashboard or console Installing the microphone • Use either truss (5 mm × 8 mm) or flush surface (5 mm × 9 mm) screws, Microphone clip (Only for DEH-X6700BS/X6700BT/X6710BT/ depending on the bracket screw X4700BT) holes. To install on the steering...