Mechanical installation
Adjust the dryer to ensure that it is horizontal
and stands firmly on all four feet (the height
adjustment must be as low as possible), fig. 1.
The maximum height adjustment of the feet is
70 mm and is only to be used cautiously while
removing lifting truck or fork truck.
Heating unit
The heating unit is to be mounted on top of the
dryer.
During transport the top plate for the heating
unit is placed on top of the dryer.
Equally during transport the two side panels and
the bracing bar A are placed in the back of the
dryer, fig. 2.
See the installation manual for the heating
unit.
Transportation fittings
During transport the transmission is secured.
Remove the transportation securing B by
cutting the strips, fig. 2.
Installation manual
1
2
B
A
15