Fujitsu SE700 Operating Manual page 77

Server bs2000

Hide thumbs Also See for SE700:

Table of Contents

Switching the server on and off

Alternatively you can switch the Server Unit off by pressing the STAND-BY button on the

server's control panel (see

BY in AUXILIARY FRAME: POWER STAND-BY/IMPL). The BS2000 system should

already have been shut down.

3. Switch off the optional Server Units

As the administrator or a privileged operator, switch off the Server Unit using the

SE Manager (menu Hardware → Server (SE<model>, Units tab, "Switch off" function),

see the "Operation and Administration" manual [5].

When the Server Unit is switched off, the BS2000 system is shut down properly taking

into account the remaining runtime specified.

Before the Server Unit is switched off, the power-on indicator lights up green, and after

it has been switched off, it lights up orange. Check this before continuing.

4. Switch off the MU

Switch off the MU using the SE Manager (menu Hardware → Server (SE<model>, Units

tab, "Switch off" function), see the "Operation and Administration" manual [5]

Before the MU is switched off, the power-on indicator lights up green, and after it has

been switched off, it lights up orange (item 11 in

before continuing.

5. Switch off the optional hardware components

Switch off the ETERNUS LT40 S2 tape library using the On/Off switch on the front (see

the "Additive Components" Operating Manual [4]).

Switch off any other connected hardware components.

U41858-J-Z126-1-76

page

The control panel and SVP frames of the Server Unit are described in the "Server

Unit /390" Operating Manual [2].

The controls and indicators of the Server Unit are described in the "Server Unit

x86" Operating Manual [3].

Switching the SE700 / SE500 on and off

42) or via the SVP console (menu item POWER STAND-

figure 10 on page

49). Check this

Table of Contents

Se500 Se300