Depth Adjusting Gauge; Stopper - Makita 2012NB Instruction Manual
Makita planer instruction manual 2012nb
Hide thumbs
Also See for 2012NB:
- Instruction manual (73 pages) ,
- Instruction manual (48 pages) ,
- Instruction manual (68 pages)
Table of Contents
Advertisement
1
3
1. Crank handle
2. Groove
3. Depth adjusting gauge
1. Stopper
2. Stopper button
3. Stopper knob
4. Table top
8
Depth adjusting gauge
003713
Use the depth adjusting gauge when you need to predeter-
mine the depth of cut more accurately. To do so, proceed as
follows.
1. First, plane the workpiece at the predetermined depth of
2
cut. Measure the thickness of the planed piece to know
how much more stock you need to remove.
2. Turn the depth adjusting gauge on the crank handle until
the 0 graduation is aligned with the groove on the tool.
3. Now turn the crank handle counterclockwise until the
graduation for the desired depth of cut is aligned with the
groove on the tool.
4. When you need to remove more than the amount speci-
fied in the table mentioned in the "Adjusting depth of cut"
section, set the depth of cut shallower than the amount
and make two or more passes.
Stopper
003714
Use the stopper when you need to plane many workpieces to
the same thickness. To do so, proceed as follows.
1
1. Turn the crank handle until the indicator plate points to
2
the scale graduation indicating the desired finished
3
dimension.
4
2. Depress the stopper button and lower the stopper until it
just contacts the table top.
3. If you need fine adjustment of the stopper, turn the stop-
per knob.
CAUTION:
•
When the stopper is not in use, always raise it to the
topmost position. Never force the crank handle when the
stopper is in contact with the table top. This may cause
tool damage.
Hide quick links:
Advertisement
Table of Contents
