Thermador PH30ZS Service Manual
Professional wall hoods
Hide thumbs
Also See for PH30ZS:
- Installation instructions manual (33 pages) ,
- Care and use manual (25 pages) ,
- Service manual (16 pages)
Table of Contents
Advertisement
PROFESSIONAL WALL HOODS
Blower Requirements: VTN1000Q, VTR600R, VTR1000R, VTR1400Q
Halogen Lamps ......................................................... 1
Infra Red Heat Lamps ............................................. 2
Filters .......................................................................... 3
Step Down Transformer ........................................ 4
Main Relay Board ..................................................... 5
Input Board ............................................................... 6
Heat Sensor .............................................................. 7
Control Panel ........................................................... 8
Service Manual
for
PH30ZS, PH36ZS, PH42ZS,
PH48ZS, PH54ZS
CONTENTS
© 2003 BSH Home Appliances, Corp.
®
Cleaning Instructions .............................................. 9
Disassembly ............................................................ 10
Stainless Steel Parts .............................................. 11
Transformer Panel Removal ................................ 12
Input Board Removal ............................................ 13
Thermador Hood Warranty .............................. 14
Wiring Diagram ...................... Inside Front Cover
Advertisement
Table of Contents
Related Manuals for Thermador PH30ZS
Summary of Contents for Thermador PH30ZS
-
Page 1: Table Of Contents
Transformer Panel Removal ........ 12 Main Relay Board ............. 5 Input Board Removal ..........13 Input Board ............... 6 Thermador Hood Warranty ......14 Heat Sensor .............. 7 Wiring Diagram ...... Inside Front Cover Control Panel ............8 © 2003 BSH Home Appliances, Corp. - Page 2 Wiring Diagram...
-
Page 3: Halogen Lamps
PHZ Service Manual Serviceable Component HALOGEN LAMPS The halogen lamp assemblies are 12 volt, 20 watt halogen bulbs. There are two light settings; normal, and dim. These two settings are controlled by the step down transformer LIGHTS NOTE: Turn off the lights and fan. Allow the lights to cool before handling. -
Page 4: Infra Red Heat Lamps
PHZ Service Manual Serviceable Component Infra Red Heat Lamps The infra red heat lamps are 120 v.a.c. 175 or 250 watt lamps. • Turn heat lamp counterclockwise to remove. • Replace lamp with either a PAR-38 175W heat lamp or a PAR-40 250W heat lamp. The PAR-38 175W heat lamp provides a tighter seal within the enclosure and produces the same amount of effective heat with lower energy consumption. -
Page 5: Filters
PHZ Service Manual Serviceable Component Filters The metal grease filters are made of anodized aluminum and are long lasting. To Remove The Metal Grease Filters • Turn the fan and lights off. • Allow filters to cool before removal. • In the following order remove the baffle filters, trims, and grease troughs. -
Page 6: Step Down Transformer
PHZ Service Manual Serviceable Component Step Down Transformer The step down transformer is a multiple tap 120 v.a.c. step down transformer. one tap outputs 12 v.a.c. for regular lights, and the other tap outputs 9.6 v.a.c.when the dim light is selected. PAGE 4... -
Page 7: Main Relay Board
PHZ Service Manual Serviceable Component Main Relay Board The main relay board is a microproccessor based printed circuit board. The relay board has specific relays to activate the components in the hood. The relay board reacts to input and commands from the input board. PAGE 5... -
Page 8: Input Board
PHZ Service Manual Serviceable Component Input Board The input board serves as a selector switch. the mode is selected on the input board buttons. The input board sends the commands to the relay board. The relay board and the input board communicate through a ribbon connector. -
Page 9: Heat Sensor
PHZ Service Manual Serviceable Component Heat Sensor The PHZ hood is equipped with a heat sensor While the sensor is activated due that is located inside the input board. It is not to excessive heat: visible or field replaceable. The entire input board must be replaced. -
Page 10: Control Panel
PHZ Service Manual Operating Instructions Hood Operating Instructions The blower should be turned on for about 5 minutes other rooms. Use the low speeds for normal use before cooking in order to establish air currents and the higher speeds for strong odors or fumes. upward through the hood. -
Page 11: Cleaning Instructions
PHZ Service Manual Cleaning Instructions Cleaning Instructions Be sure lights are cool before cleaning the hood. To Clean Filters • When the filter reminder illuminates, the filters and grease troughs should be cleaned. When used over a grill, more frequent cleaning may be required. -
Page 12: Disassembly
PHZ Service Manual Disassembly Disassembly The halogen lights and infra red lights are mounted on the light panel. To drop light panel, and gain access to components; 1) Remove 3 screws as illus- trated and drop the light panel. PAGE 10... -
Page 13: Stainless Steel Parts
PHZ Service Manual Replaceable Stainless Steel Parts Stainless Steel Parts The stainless st5eel parts illustrated below are field replaceable. Inside Panel Spacer Light Panel Grease Trough Spacer Grease Trough Inside Panel Top Trim Filters PAGE 11... -
Page 14: Transformer Panel Removal
PHZ Service Manual Transformer Panel Removal Transformer Panel Removal The step down transformer, electronic control and wire harness are mounted on the transformer panel. To remove the transformer panel and gain access to these components; 1) Lower the light panel. 2) Remove 4 screws that attach the transformer panel to the sides of the hood. -
Page 15: Input Board Removal
PHZ Service Manual Input Board Removal Input Board Removal The input board is mounted on the inside of the hood. To remove the input board: 1) Remove light panel. 2) Remove (4) number 9 hex head nuts that attach the input board to the hood. (see illustration), Input Board PAGE 13... -
Page 16: Thermador Hood Warranty
• Call the Thermador Customer Support Call Center at 800-735-4328. • Write us to at:Thermador 5551 McFadden Avenue, Huntington Beach CA, 92649. ® 5551 McFadden Avenue, Huntington Beach, CA 92649 • 800/735-4328 ECO 91954 • 5060008316 Rev. A • © 2003 BSH Home Appliances, Corp. • Litho in U. S. A. 1/03...