Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG L 87485 FL
Summary of Contents for AEG L 87485 FL
- Page 1 L 87485 FL WASHING MACHINE USER MANUAL L 87685 FL...
-
Page 2: Table Of Contents
CONTENTS 4 SAFETY INFORMATION 5 ENVIRONMENT CONCERNS 6 PRODUCT DESCRIPTION 7 ACCESSORIES 7 CONTROL PANEL 11 PROGRAMMES 14 BEFORE FIRST USE 15 USING THE APPLIANCE 15 LOADING THE LAUNDRY 15 FILLING DETERGENT AND ADDITIVES 17 SETTING AND STARTING A PROGRAMME 18 AT THE END OF PROGRAMME 19 HELPFUL HINTS AND TIPS 20 CARE AND CLEANING... - Page 3 ENGLISH FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
-
Page 4: Safety Information
SAFETY INFORMATION Before the installation and use, read this manual carefully: • For your safety and the safety of your property • To help the environment • For the correct operation of the ap- pliance. Always keep these instructions with the appliance also if you move or give it to GENERAL SAFETY a different person. -
Page 5: Environment Concerns
ENGLISH internal components and cause leak- Electrical connection ages or malfunctions. • Make sure that the appliance is • Do not install and connect a dam- earthed. aged appliance. • Make sure that the electrical informa- • Make sure to remove all packaging tion on the rating plate agrees with and transport bolts. -
Page 6: Product Description
• To use the correct quantity of the de- disposed of correctly, you will help tergent, check the water hardness of prevent potential negative your domestic system consequences for the environment and human health, which could otherwise be caused by inappropriate waste The symbol on the product or on its handling of this product. -
Page 7: Accessories
ENGLISH ACCESSORIES Spanner To remove the transit bolts. Plastic caps To close the holes on the rear side of the cabinet after the removal of the transit bolts. Anti-flood inlet hose To prevent possible leakage Plastic hose guide To connect the drain hose on the edge of a sink. -
Page 8: Programme Knob
• After 5 minutes from the end of the PROGRAMME KNOB washing programme. Refer to 'At the Turn this knob to set a programme. The end of programme'. related programme indicator comes on. DISPLAY The display shows: The temperature of the set programme Cold water The spin speed of the set programme No Spin symbol... - Page 9 ENGLISH The detergent overdosing comes on at the end of the cycle when the appliance detects too much detergent. You cannot open the appliance door when the symbol is on. You can open the door only when the symbol goes off. If the programme is completed but the symbol stays on: •...
-
Page 10: Delay Start Button
The value shows the total number of the rinses. The indicator bar is fully filled when you set to the maximum number of rinses. The Stain symbol comes on when you activate the function. The Prewash symbol comes on when you activate the func- tion. -
Page 11: Programmes
ENGLISH • To activate the function, press button TEMPERATURE BUTTON and button at the same time Press button to change the default until the display shows the symbol temperature. When the display shows - -, the appliance does not heat the •... - Page 12 Programme Type of load Cycle de- Functions Temperature Max. weight of load scription Pflegeleicht Synthetic or mixed fabric items Wash SPIN REDUCTION 60° - Cold with normal soil. Rinses RINSE HOLD max. load 4 kg Short spin VORWÄSCHE EXTRA SPÜLEN FLECKEN ZEIT SPAREN Leichtbü-...
- Page 13 ENGLISH Programme Type of load Cycle de- Functions Temperature Max. weight of load scription Jeans All items in jeans. Jersey made Wash SPIN REDUCTION 60° - 0° items with hi-tech materials. Rinses RINSE HOLD max. load 8 kg Short spin VORWÄSCHE EXTRA SPÜLEN 20 Min.
-
Page 14: Before First Use
Steam can be used for dried, washed or worn once laundry. These pro- grammes can reduce creases and odours and make your laundry more soft. Do not use any detergent. If necessary, remove stains by washing or using localized stain removal. Steam programmes do not perform any hygienic cycle. -
Page 15: Using The Appliance
ENGLISH USING THE APPLIANCE 1. Open the water tap. 5. Use the correct quantity of deter- gent and additives. 2. Connect the mains plug to the mains socket. 6. Set and start the correct pro- gramme for the type of laundry and 3. - Page 16 Liquid additives compartment (fabric conditioner, starch). Put the product in the compartment before you start the pro- gramme. This is the maximum level for the quantity of liquid additives. The compartment for the stain remover. Put the product in the compartment and set the stain function be- fore you start the programme.
-
Page 17: Setting And Starting A Programme
ENGLISH 4. To use liquid detergent, turn the flap down. With the flap in the position DOWN: – Do not use gelatinous or thick liquid detergents. – Do not put more liquid deter- gent than the limit showed in the flap. –... -
Page 18: At The End Of Programme
SET THE DELAY START OPEN THE DOOR 1. Press button While a programme or the delay start again and again operates, the appliance door is locked. until the display shows the number of minutes or hours. The related To open the appliance door: symbols comes on. -
Page 19: Helpful Hints And Tips
ENGLISH 4. Deactivate the appliance. The appliance drain and spin automatically after approximate- ly 18 hours. HELPFUL HINTS AND TIPS THE LAUNDRY LOAD Special stain removers are available. Use the special stain remover that is ap- • Divide the laundry in: white, col- plicable to the type of stain and fabric. -
Page 20: Care And Cleaning
• Clarke degrees. Water hardness table Water hardness Level Type °dH °T.H. mmol/l Clarke soft 0-15 0-1.5 medium 8-14 16-25 1.6-2.5 10-16 hard 15-21 26-37 2.6-3.7 17-25 very hard > 21 > 37 >3.7 >25 CARE AND CLEANING WARNING! CAUTION! Do not use alcohol, solvents or chemical products. -
Page 21: Detergent Dispenser
ENGLISH DETERGENT DISPENSER To clean the dispenser: 1. Press the lever. 2. Pull the dispenser out. 3. Remove the top part of the liquid additive compartment. 4. Clean all the parts with water. 5. Clean the dispenser recess with a brush. - Page 22 To clean the drain pump: 1. Open the drain pump door. 2. Pull the flap out to remove it. 3. Put a container below the recess of the drain pump to collect the water that flows out. 4. Press the two levers and pull for- ward the drainage duct to let the water flow out.
-
Page 23: Emergency Drain
ENGLISH 9. Clean the filter under the water tap and put it back in the pump into the special guides. Make sure that you tighten correctly the filter to prevent leakages. Put the flap back and close the drain pump door. THE INLET HOSE FILTER AND •... -
Page 24: Trouble Shooter And Service
When you drain the water with the 2. Close the water tap. emergency drain procedure, you must 3. Remove the water inlet hose activate again the drain system: 4. Put the two ends of the inlet hose in 1. Put 2 litres of water in the main wash a container and let the water flow compartment of the detergent dis- out of the hose. - Page 25 ENGLISH Problem Possible cause Possible solution The filter of the drain Clean the filter of the drain pump is blocked. pump. Refer to 'Care and clean- ing'. The connection of the Make sure that the connection is water drain hose is not correct.
- Page 26 Problem Possible cause Possible solution You cannot open The washing programme Let the washing programme end. the appliance is in operation. door. There is water in the Set the drain or the spin pro- drum. gramme. The appliance Incorrect level of the ap- Adjust the level of the appliance.
-
Page 27: Technical Data
Maximum load Cotton 8 kg Spin speed Maximum 1400 rpm (L 87485 FL) 1600 rpm (L 87685 FL) 1) Connect the water inlet hose to a water tap with a 3/4'' thread. INSTALLATION UNPACKING 1. Use the gloves. Remove the exter- nal film. - Page 28 4. Remove the internal film. 5. Open the door. Remove the poly- styrene piece from the door seal and all the items from the drum. 6. Put the front piece on the floor be- hind the appliance. Carefully put down the appliance with the rear side on it.
- Page 29 ENGLISH 9. Remove the power supply cable and the drain hose from the hose hold- ers. Remove the three bolts. Use the key supplied with the appliance. Pull out the plastic spacers. Replace the plastic spacers with the plastic caps. You can find these caps in the user manual bag.
-
Page 30: Positioning And Levelling
POSITIONING AND LEVELLING • Install the appliance on a flat hard floor. • Make sure that carpets do not stop the air circulation below the appli- ance. • Make sure that the appliance does not touch the wall or other units •... -
Page 31: Water Drainage
ENGLISH • Connect the water inlet hose to the cold water tap with 3/4 thread. CAUTION! Make sure that there are no leaks from the couplings. Do not use an extension hose if the inlet hose is too short. Con- tact the service centre for the re- placement of the inlet hose. - Page 32 • On the edge of a sink. • Make sure that the plastic guide can- not move when the appliance drains. Attach the guide to the water tap or the wall. • To a stand pipe with vent-hole. Refer to the illustration. Directly into a drain pipe at a height of not less than 60 cm and not more than 100 cm.
- Page 33 ENGLISH...
- Page 35 ENGLISH...
- Page 36 132940521-A-4820010...