12. TECHNICAL INFORMATION ..........26 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler –...
ENGLISH 1. SAFETY INFORMATION Before the installation and use of the appliance, careful- ly read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use cau- ses injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly quali- fied persons in order to avoid a hazard. • The operating water pressure (minimum and maxi- mum) must be between 0,5 bar (0,05 MPa) and 8 bar (0,8 MPa) •...
ENGLISH Water connection • Do not put a container to collect pos- sible water leakage under the appli- • Make sure not to cause damage to the ance. Contact the Service to ensure water hoses. which accessories can be used. •...
3. PRODUCT DESCRIPTION Worktop clockwise, until the groove is horizon- tal. To deactivate the device, turn it Detergent dispenser counterclockwise, until the groove is Control panel vertical. Door handle Rating plate Drain pump Feet for the appliance level Water drain hose...
ENGLISH 4. CONTROL PANEL On/Off button (Auto Off) The AUTO OFF function automatically deactivates the appliance to stop the en- Programme knob ergy consumption when: Display • You do not use the appliance for 5 mi- Start/Pause button (Départ/Pause ) nutes before you press button Delay Start button (Départ Différé) –...
Page 8
4.3 Display The display shows: The temperature of the set programme Cold water The spin speed of the set programme No Spin symbol Rinse Hold symbol 1) Only available for Spin/Drain programme. Prewash phase Washing phase Rinses phase Spin phase The phase symbols •...
Page 9
ENGLISH You cannot open the appliance door when the symbol is You can open the door only when the symbol goes off. If the programme is completed but the symbol stays • The 'Rinse Hold' function is on. • There is water in the drum. The delay start symbol comes on when you set the delay start function.
10 www.aeg.com The indicator bar is fully filled when you set to the maxi- mum number of rinses. The Stain symbol comes on when you activate the function. The Prewash symbol comes on when you activate the func- tion. The indicator bar is not fully filled when you set only one of the functions.
ENGLISH • You activate the appliance. You can activate the function: • You deactivate the appliance. • Before you press the Start/Pause but- : the appliance cannot start. • You press the buttons. • After you press the Start/Pause button •...
Page 12
12 www.aeg.com Programme Type of load and soil Temperature range Maximum load, Maximum spin Couette Special programme for one synthetic blanket, 60°C - 30°C duvet, bedspread and so on. 3 kg, 800 rpm Anti-Allergies White cotton items. This programme removes 60°C...
14 www.aeg.com 6. CONSUMPTION VALUES At programme start the display shows the duration programme for the max- imum load capacity. During the washing phase the programme duration is automatically calcula- ted and can greatly be reduced if the laundry load is lower than the maxi- mum load capacity (e.g.
ENGLISH Put a small quantity of detergent in temperature without laundry. This the main wash compartment of the removes all possible dirt from the detergent dispenser. Set and start a drum and the tub. programme for cotton at the highest 8.
Page 16
16 www.aeg.com The detergent compartment for the washing phase. If you use a liquid detergent, put it immediately before you start the programme. Liquid additives compartment (fabric conditioner, starch). Put the product in the compartment before you start the pro- gramme.
Page 17
ENGLISH To use liquid detergent, turn the flap down. With the flap in the position DOWN: – Do not use gelatinous or thick liquid detergents. – Do not put more liquid deter- gent than the limit showed in the flap. –...
18 www.aeg.com • The acoustic signals operate. Press button again. The washing programme continues. • In the display comes on. • The indicator of the Start/Pause but- 8.7 Cancel a programme goes off. • The door lock symbol goes off.
ENGLISH 9. HINTS AND TIPS 9.1 The laundry load Special stain removers are available. Use the special stain remover that is applica- • Divide the laundry in: white, coloured, ble to the type of stain and fabric. synthetics, delicates and wool. •...
20 www.aeg.com 10.1 Descaling 10.3 Maintenance wash The water we use contains limescale. If it With the low temperature programmes it becomes necessary, use a water softener is possible that some detergent stays in to remove limescales. the drum. Make regularly a maintenance Use a special product made for washing wash.
ENGLISH Remove the top part of the liquid additive compartment. Clean all the parts with water. Clean the dispenser recess with a brush. Put back the dispenser in the recess. • The display shows an alarm code be- 10.7 Drain pump cause of the problem with water drain.
Page 22
22 www.aeg.com Put a container below the recess of the drain pump to collect the water that flows out. Press the two levers and pull for- ward the drainage duct to let the water flow out. When the container is full of water, put the drainage duct back again and empty the container.
ENGLISH To clean the water inlet filters: Close the water tap. Remove the water inlet hose from the water tap. Clean the filter in the inlet hose with a stiff brush. Remove the inlet hose behind the appliance. Clean the filter in the valve with a stiff brush or a towel.
24 www.aeg.com 11. TROUBLESHOOTING The start of the appliance does not oc- • - The appliance does not drain cur or it stops during operation. the water. First try to find a solution to the problem • - The appliance door is open or (refer to the table).
Page 25
ENGLISH Problem Possible cause Possible solution The appliance Close the door correctly. door is open or not closed cor- rectly. The anti-flood de- • Disconnect the appliance. vice is on. • Close the water tap. • Contact the service centre. The spin phase The spin phase is off.
26 www.aeg.com Problem Possible cause Possible solution The load is very small. Add more laundry in the drum. The cycle is short- The appliance calculates See the ‘Consumption Values’ er than the time a new time according to chapter. displayed.
ENGLISH 13. ENVIRONMENT CONCERNS Recycle the materials with the appliances. Do not dispose symbol . Put the packaging in appliances marked with the symbol applicable containers to recycle it. with the household waste. Return the Help protect the environment and product to your local recycling human health and to recycle waste facility or contact your municipal...