Care And Cleaning - Electrolux EOB8851AA User Manual
Hide thumbs
Also See for EOB8851AA:
- User manual (52 pages) ,
- User manual (52 pages) ,
- User manual (44 pages)
Table of Contents
Advertisement
CARE AND CLEANING
WARNING!
Refer to "Safety information" chap-
ter.
Notes on cleaning:
• Clean the front of the appliance with a
soft cloth with warm water and a clean-
ing agent.
• To clean metal surfaces, use a usual
cleaning agent.
• Clean the appliance interior after each
use. Then you can remove dirt more
easily and it does not burn on.
• Clean stubborn dirt with a special oven
cleaner.
• Clean all accessories after each use and
let them dry. Use a soft cloth with warm
water and a cleaning agent.
• If you have nonstick accessories, do not
clean them using aggressive agents,
sharp-edged objects or a dishwasher. It
can cause damage to the nonstick coat-
ing.
STEAM CLEANING
1.
Remove the worst of the dirt manually.
2.
Put 250 ml of water with 3 table-
spoons of vinegar directly into the
steam generator.
3.
Activate the Steam Cleaning function in
the main menu. The display shows the
duration of the function.
4.
An acoustic signal sounds when the
programme is completed. Touch a
sensor field to deactivate the signal.
5.
Wipe out the appliance with a soft
cloth. Remove the remaining water
from the steam generator.
6.
Keep the appliance door open for ap-
proximately 1 hour. Wait until the appli-
ance is dry.
STEAM GENERATION SYSTEM
CAUTION!
Dry the steam generator after
each use. Remove the water with
the sponge.
Remove the limescale with water
and vinegar.
CAUTION!
Chemical de-scaling agents can
cause damage to the enamel. Fol-
low the instructions of the manu-
facturer.
Cleaning the water drawer and the
steam generator:
1.
Put the water and vinegar mixture (ap-
proximately 250 ml) through the wa-
ter drawer into the steam generator.
Wait for approximately 10 minutes.
2.
Remove the water and vinegar with the
sponge.
3.
Put clean water (100 - 200 ml) into the
water drawer to flush the steam gener-
ation system.
4.
Remove the water from the steam
generator with the sponge and rub it
dry.
5.
Keep the door open to let the appli-
ance dry fully.
SHELF SUPPORTS
You can remove the shelf supports to clean
the side walls.
Removing the shelf supports
1
2
1.
Carefully pull the supports up and out
of the front catch.
2.
Lightly move the supports on the front
catch inwards.
3.
Pull the supports out of the rear catch.
Installing the shelf supports
Install the shelf supports in the opposite se-
quence.
ENGLISH
23
3
Advertisement
Table of Contents
