Television Remote Control Buttons
SOUND MENU
N
12
SOUND MENU
The Sound Menu button allows you to choose between three different sound
modes (Dynamic, Standard and Soft).
DYNAMIC:
STANDARD:
SOFT:
OFF-TIMER
Pressing the Off-Timer allows the television to be preset to turn off after a
period of time. The timer settings (in minutes) are: 30, 60 and 90.
Setting the Off-Timer to AUTO will cause the television to go into Standby five
minutes after the television broadcast station you are tuned to stops
transmitting.
Setting the OFF-TIMER to 0 cancels the timer operation.
Stereo / Mono
Pushing the button changes the mode from Stereo to Mono and back again.
Normally the television will detect whether the broadcast signal is Mono or
Stereo and will set the mode accordingly. If the Stereo signal is weak or if the
receiving conditions are not the best, it is recommended that the Mono mode
be manually selected.
Bilingual *
This system allows two languages to be transmitted on one signal. Switching
between the Main (I) and (II) selects the desired language.
* Note: Bilingual sound is not currently available.
Normalisation
The Normalisation button is used to reset the television to factory set levels.
Colour, Sharpness, Contrast, Brightness, Treble, Bass and Balance will be
reset. The button will only operate if the menu is displayed on the screen.
Used where music and speech are fairly
evenly spread.
Used where music is more common than
speech such as musicals, video clips etc.
Used where speech is more common than
music such as talk shows, news broadcasts
etc.