For the full details, see the IBM ServerGuide Scripting Toolkit, Windows Edition User's
Reference and IBM ServerGuide Scripting Toolkit, Linux Edition User's Reference at the
following website:
http://ibm.com/support/entry/portal/docdisplay?lndocid=SERV-TOOLKIT
Windows installation
This section describes the process to install the ServerGuide Scripting Toolkit, create a
deployment image for Windows Server 2008 R2 Enterprise Edition, and copy this image to a
USB key for deployment. To configure a USB key for deployment, you need the following
devices:
A system running Windows Vista, Windows Server 2008, Windows 7, Windows Server
2008 R2, Windows 2.1 Preinstallation Environment (PE), or a Windows 3.0 PE session
A USB key with a storage capacity at least 64 MB larger than your Windows PE image, but
not less than 4 GB
Procedure
We use this procedure:
1. Install the ServerGuide Scripting Toolkit.
2. Create a deployment image.
3. Prepare the USB key.
Installing the ServerGuide Scripting Toolkit
You must install the English language version of the Windows Automated Installation Kit (AIK)
for the Windows 7 family, Windows Server 2008 family, and Windows Server 2008 R2 family,
which is available at the following website:
http://www.microsoft.com/downloads/en/details.aspx?familyid=696DD665-9F76-4177-A81
1-39C26D3B3B34&displaylang=en
Follow these steps to install the ServerGuide Scripting Toolkit, Windows Edition:
1. Download the latest version from the following website:
http://ibm.com/support/entry/portal/docdisplay?lndocid=SERV-TOOLKIT
2. Create a directory, for example, C:\sgshare.
3. Decompress the
you created, for example, C:\sgshare\sgdeploy.
Creating a deployment image
Follow these steps to create a Windows installation image:
1. Start the Toolkit Configuration Utility in the C:\sgshare\sgdeploy directory.
2. Select Add Operating System Installation Files, as shown in Figure 7-46 on page 351.
350
IBM eX5 Implementation Guide
ibm_utl_sgtkwin_X.XX_windows_32-64.zip
file to the directory that