3.4
Features
● SENSORPROM
– All SITRANS F M electromagnetic flowmeters feature a unique SENSORPROM
– At commissioning the flowmeter commences measurement without any initial
– The factory settings matching the sensor are stored in the SENSORPROM
● USM II "Plug & Play" add-on communication modules
USM II - the Universal Signal Module with "Plug & Play" simplicity makes it easy to
access and integrate the flow measurement with almost any control system. It ensures
the flowmeter will be easy to upgrade to new communication platforms in the future, too.
● CAN communication
The transmitter operates internally via an internal CAN communication bus. Signals are
transferred through a signal conditioner to the display module and to/from
internal/external option modules and the dialog module.
● Dialog module
The display unit consists of a 3-line display and a 6-key keypad. The display shows a flow
rate or a totalizer value as a primary reading and can be changed from the factory-set
English to ten other languages. In the Operator menu setup it is possible to configure the
display to show various different menus.
● Output module
The output module converts flow data to analog, digital and relay outputs. The outputs
are galvanically isolated and can be individually set to suit a particular application.
MAG 6000 I / MAG 6000 I Ex de transmitter
Operating Instructions, 04/2016, A5E02083319-AG
memory unit
®
memory unit which stores sensor calibration data as well as transmitter settings for the
lifetime of the product.
programming.
customer- specified settings are downloaded to the SENSORPROM
transmitter be replaced, the new transmitter will upload all previous settings and
resume measurement without any need for re-programming.
Description
3.4 Features
®
unit. Also
®
unit. Should the
®
21