Toshiba PORTEGE M400 Maintenance Manual page 387

Personal computer

Hide thumbs Also See for PORTEGE M400:

Table of Contents

4. Turn up two points of insulator and disconnect the MDC cable from the connector

CN4100 on the system board.

Installing the MDC

The following describes the procedure for installing the MDC. (See Figure 4-35 and 4-36.)

1. Connect the MDC cable to the connector CN4100 on the system board and wrap it

with insulator.

2. Connect the MDC cable to the connector on the MDC.

3. Install the MDC to the connector CN3010 on the system board and secure it with the

following screws.

PORTEGE M400 Maintenance Manual (960-541)

Figure 4-36 Removing the modem cable

4 Replacement Procedures

[CONFIDENTIAL]

Chapters

Table of Contents