Cisco Nexus 5000 Series Configuration Manual page 231
Nx-os san
Hide thumbs
Also See for Nexus 5000 Series:
- Cli configuration manual (660 pages) ,
- Configuration manual (324 pages) ,
- Command reference manual (196 pages)
Table of Contents
Advertisement
Managing FLOGI, Name Server, FDMI, and RSCN Databases
The RSCN timer value must be the same on all switches in the VSAN.
Note
Before performing a downgrade, make sure that you revert the RSCN timer value in your network to the
Note
default value. Failure to do so will disable the links across your VSANs and other devices.
You can configure the RSCN timer.
SUMMARY STEPS
1. configure terminal
2. rscn distribute
3. rscn event-tov timeout vsan vsan-id
4. no rscn event-tov timeout vsan vsan-id
5. rscn commit vsan vsan-id
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2
rscn distribute
Example:
switch(config)# rscn distribute
Step 3
rscn event-tov timeout vsan vsan-id
Example:
switch(config)# rscn event-tov 1000 vsan 501
Step 4
no rscn event-tov timeout vsan vsan-id
Example:
switch(config)# no rscn event-tov 1100 vsan 245
Step 5
rscn commit vsan vsan-id
Example:
switch(config)# rscn commit vsan 25
OL-27583-01
Purpose
Enters global configuration mode.
Enables RSCN timer configuration distribution.
Sets the event time-out value in milliseconds for the
specified VSAN. The range is 0 to 2000 milliseconds.
Setting a zero (0) value disables the timer.
Reverts to the default value (2000 milliseconds for Fibre
Channel VSANs).
Commits the RSCN timer configuration to be distributed
to the switches in the specified VSAN.
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
RSCN
209
Advertisement
Table of Contents
